1. Introducció
Thank you for choosing the PISEN LiFePO4 Battery 1000W Portable Power Station. This device is designed to provide reliable and efficient power for various applications, from outdoor adventures to household emergencies. Featuring advanced LiFePO4 battery technology, multiple output options, and robust safety features, this power station ensures a stable and safe power supply for your electronic devices and appliances.
2. Informació de seguretat
Please read all safety instructions carefully before using the power station to prevent injury or damage to the unit. Keep this manual for future reference.
Precaucions generals de seguretat:
- No desmunteu, no repareu ni modifiqueu la unitat.
- Mantingueu la unitat allunyada del foc, l'aigua i les temperatures extremes.
- Do not expose the unit to direct sunlight for prolonged periods.
- Assegureu-vos una ventilació adequada durant l'ús i la càrrega.
- Feu servir només cables i adaptadors de càrrega aprovats.
- Mantenir fora de l'abast dels nens i mascotes.
Sistema de gestió de bateries (BMS):
The PISEN Power Station is equipped with an automotive-level Battery Management System (BMS) that provides comprehensive protection, including:
- Protecció sobre corrent
- Més del voltage Protecció
- Protecció de sobretemperatura
- Protecció contra curtcircuits
- Protecció contra descàrregues
- Protecció de sobrecàrrega
These protections ensure safe and reliable operation of the device.
Figure 2.1: LiFePO4 Battery and Safety Features Overview
3. Producte acabatview
The PISEN 1000W Portable Power Station is designed for versatility and ease of use, featuring a robust build and multiple power output options.
Característiques principals:
- Sortida d'alta potència de 1000 W: Supports 99% of electrical appliances.
- Bateria LiFePO4 de 1008 Wh: High energy density, 3000+ cycles for long-lasting energy.
- Bidirectional Inverter Technology: Supports direct charging from mains power without extra adapters.
- Sortida d'ona sinusoïdal pura: Ensures no damage to sensitive electrical appliances.
- Ports de sortida múltiples: 6 kinds of output, allowing up to 10 devices to be used simultaneously.
- Càrrega ràpida: Fully charged in approximately 1.5-2 hours via AC (800W Max) or 5-7 hours via solar panel (200W Max).
- Funció UPS: Switches to power station supply within 10ms during sudden power failure.
- Llum LED integrada: 1.5W Max, with low light, high light, and SOS modes. Features magnetic attachment for convenience.
Diagrama de components:
Figure 3.1: Power Station Interfaces
- AC Output x2 (230V/1000W)
- DC5521 Output x2 (12V-10A 120W Max)
- Type-C1 (PD100W, Unidirectional)
- Type-C2 (PD20W)
- USB-A1 (QC18W)
- USB-A2 (QC18W)
- Cigarette Lighter Output x1 (13.2V-10A 132W)
Figura 3.2: Característiques detallades
- Comfortable handle design
- LED screen real-time display
- Charging interface protected by a cover
- Dual silent fan active cooling system
- Interruptor d'alimentació independent
- Overcurrent protection button
Video 3.1: PISEN Power Station Product Demonstration
4. Especificacions
| Atribut | Valor |
|---|---|
| Nom del producte | PISEN Super Fast Charging Power Station 1000W |
| Model | TS-OPS02 |
| Capacitat de la bateria | 1008 Wh |
| Tipus de bateria | 3.2V lithium iron phosphate (LiFePO4) |
| Capacitat nominal | 45000 mAh/22.4 V |
| Entrada de CA | 800W Max (Fully charged in ~1.5 hours) |
| Solar Input (XT60 interface) | 10-30V DC 200W Max (Fully charged in ~5-6 hours) |
| Vehicle Power Adapter Input | 12V 10A 120W Max (Fully charged in ~10 hours) |
| Sortida de CA | Rated power 1000W, Maximum constant power output 1800W |
| AC Output 2 (European Spec) | 230V/50Hz |
| Forma d'ona de sortida | Onda senyal pura |
| Sortida de corrent continu | DC5521x2: 12V-10A 120W MAX |
| Sortida tipus C1 | PD100W (Unidirectional) |
| Sortida tipus C2 | PD20W |
| Sortida USB-A1 | QC18W |
| Sortida USB-A2 | QC18W |
| Temperatura de funcionament | Temperatura de càrrega: 0 °C ~ 40 °C |
| Temperatura de descàrrega | -20°C~45°C |
| Pes del producte | 10.8 kg |
| Mida del producte | 366 * 230 * 224 mm |
| Potència nominal | 1000W |
| Potència màxima | 2000W |
| Altres | Magnetic suction lamp: 1.5 W MÀX |
Figure 4.1: Regional Specifications
5. Configuració
Desembalatge:
Traieu amb cura la central elèctrica i tots els accessoris de l'embalatge. Verifiqueu que hi hagi tots els components:
- PISEN Outdoor Power Station x1
- Cable de càrrega de CA x1
Càrrega inicial:
Abans del primer ús, es recomana carregar completament la central elèctrica.
Figure 5.1: Charging Methods and Times
- Càrrega de CA: Connect the provided AC charging cable to the power station's AC input port and then to a wall outlet. The LED screen will indicate charging status. Charging time is approximately 1.5-2 hours (800W Max).
- Càrrega solar: Connect a compatible solar panel (XT60 interface, 10-30V DC 200W Max) to the power station's solar input port. Ensure the solar panels are placed in direct sunlight for optimal charging. Charging time is approximately 5-7 hours (200W Max).
- Càrrega del cotxe: Connect the car charging cable (12V 10A DC 120W Max) to the power station's car charging input and your vehicle's cigarette lighter socket. Charging time is approximately 10 hours.
6. Instruccions de funcionament
Encès/apagat:
- Press and hold the main POWER button for a few seconds to turn the unit on or off.
- The LED screen will illuminate, displaying battery level, output/input wattage, i altres indicadors d'estat.
Ús dels ports de sortida:
To use a specific output type (AC, DC, USB), press the corresponding power button for that section. The button will light up to indicate it's active.
- Sortida de CA: Plug your AC appliances into the AC outlets. Ensure the total power consumption does not exceed 1000W (1800W peak).
- Sortida de corrent continu: Connect your 12V DC devices to the DC5521 ports or the cigarette lighter output.
- Sortida USB: Connect your USB-powered devices to the USB-A (QC18W) or Type-C (PD100W/PD20W) ports.
Funció de llum LED:
Figure 6.1: Magnetic LED Light in Use
The power station includes a magnetic LED light. To use it:
- Remove the LED light from its slot on the power station.
- Press the button on the LED light to cycle through low light, high light, and SOS modes.
- The magnetic base allows it to be attached to metallic surfaces for hands-free illumination.
Funció UPS:
Figure 6.2: UPS Technology
When the power station is connected to an AC wall outlet and also has devices connected to its AC output, it can function as an Uninterruptible Power Supply (UPS). In case of a sudden power outage, the system will automatically switch to battery power within 10ms, ensuring continuous operation for connected devices.
7. Manteniment
Neteja:
- Feu servir un drap sec i suau per netejar l'exterior de la central elèctrica.
- No utilitzeu netejadors abrasius ni dissolvents.
- Keep the ventilation grilles clear of dust and debris to ensure proper cooling.
Emmagatzematge:
- Guardeu la central elèctrica en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- For long-term storage, charge the unit to approximately 50-80% every 3-6 months to prolong battery life.
- Avoid storing the unit in a completely discharged state.
Cura de la bateria:
- The LiFePO4 battery is designed for long life (3000+ cycles).
- Eviteu descarregar completament la bateria amb freqüència, ja que això pot reduir-ne la vida útil total.
- Operate the unit within the recommended temperature ranges (Charging: 0°C~40°C, Discharge: -20°C~45°C).
8. Solució De Problemes
If you encounter issues with your PISEN Power Station, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La unitat no s'encén | La bateria està completament descarregada. | Connecteu-lo a la presa de corrent altern i carregueu-lo durant almenys 30 minuts abans d'intentar engegar-lo. |
| No hi ha sortida dels ports de CA | AC output not activated. Overload protection triggered. | Press the AC power button to activate. Reduce the load if an overload indicator is shown. Restart the unit. |
| Càrrega lenta mitjançant panell solar | Insufficient sunlight. Incorrect panel voltage/wattage. | Ensure panels are in direct sunlight and angled correctly. Verify solar panel specifications (10-30V DC, 200W Max). |
| La unitat es sobreescalfa | Blocked ventilation. Excessive load. | Ensure vents are clear. Reduce connected load. Move to a cooler environment. |
| LED screen not displaying correctly | Error temporal de programari. | Power off the unit, wait 1 minute, then power on again. |
Si el problema persisteix després de provar aquestes solucions, poseu-vos en contacte amb l'atenció al client.
9. Consells d'usuari
Mentre que un usuari específic reviews or Q&A were not provided for this manual, here are some general tips to enhance your experience with the PISEN Portable Power Station:
- Optimitzar la càrrega solar: Angle your solar panels directly towards the sun for maximum efficiency, especially during peak daylight hours.
- Manage Power Consumption: Prioritize charging essential devices first. For longer trips, consider bringing a solar panel for continuous recharging.
- Regularly Check Battery Level: Keep an eye on the LED display to monitor the remaining battery capacity, especially when powering high-wattagdispositius e.
- Utilize Magnetic Light: The detachable magnetic LED light is very versatile. Use it for hands-free lighting during camping, car repairs, or as an emergency light.
- Keep Ports Covered: When not in use, ensure the charging interface cover is closed to protect against foreign matter and moisture.
10. Garantia i assistència
PISEN offers a 3-year worry-free care period for this product. For detailed warranty information, service requests, or technical support, please contact PISEN customer service through the following channels:
- Correu electrònic: 1494945259@qq.com
- WhatsApp: +86 19526406295
Please have your product model (TS-OPS02) and purchase date available when contacting support.
