Manual d'usuari del ciclocomputador GPS CYCPLUS M3

1. Configuració

1.1 Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

Image: Contents of the CYCPLUS M3 package, including the computer, cables, and mounting accessories.

• GPS Bike Computer (M3)
• Cable de càrrega tipus C.
• Manual d'instruccions
• Rubber Band x3
• Suport per ordinador de bicicleta
• Coixinet de goma

1.2 Instal·lació

Follow these steps to install the CYCPLUS M3 on your bicycle:

Image: Diagram illustrating the installation of the bike computer mount using rubber bands.

1. Using the included rubber bands, securely attach the base to your bicycle's handlebar or stem by crossing the bands diagonally.
2. Fix the M3 computer onto the installed base by twisting it until it locks into place.
3. An optional CYCPLUS bike computer mount (sold separately) can also be used for installation.

1.3 Initial App Connection

For quick setup and enhanced features, connect your M3 to the CYCPLUS Fit App:

Image: Screenshot of the CYCPLUS Fit app showing data analysis, sync to Strava, and firmware update options.

• Descarrega't el CYCPLUS Fit APP from Google Play or the App Store.
• Open the app and follow the on-screen instructions to connect and configure your M3 device via Bluetooth (BLE 5.0).
• Once connected, you can download Ephemeris data through the app to speed up GPS positioning. Note that Ephemeris data is typically valid for 6 hours.

2. Instruccions de funcionament

2.1 Funcions dels botons

The CYCPLUS M3 features three buttons: L, R1, and R2. Their functions vary depending on whether you are in normal use or settings mode.

2.2 Settings Menu Navigation

For quick setup, it is recommended to use the CYCPLUS Fit APP. Alternatively, you can use the device buttons:

• Introduïu la configuració: Premeu llargament el botó R1 botó.
• Navigate Settings Pages: Premeu breument R1 button to cycle through the 8 setting pages (C1-C8).

2.3 ANT+ Sensors Connection (C2)

The M3 supports ANT+ sensors for speed, heart rate, power, and cadence.

• From the settings menu, navigate to the C2 pàgina.
• Premeu el botó L button to start searching for ANT+ sensors.
• The device will check for speed, heart rate, power, and cadence sensors.
• If a sensor is detected, its data will be displayed. If no sensor is found, a horizontal line will appear in its place.
• The device will return to the home page automatically after 10 seconds.

2.4 Unpairing Sensors (C9)

To unpair all connected sensors:

• Navegueu fins a C9 page in the settings menu.
• Premeu el botó L button to unpair all currently connected sensors.

2.5 Wheel Circumference Setting (C3)

Set the wheel circumference for accurate speed and distance tracking:

1. Navegueu fins a C3 page in the settings menu.
2. Premeu el botó L button to start the setting process. The adjustable digit will flash.
3. Premeu el botó R1 button to adjust the value of the flashing digit.
4. Premeu el botó R2 button to switch between digits.
5. Once the desired circumference is set, press the L botó per confirmar i desar la configuració.
6. Premsa llarga R1 per tornar a la pàgina d'inici.

2.6 Time Zone Setting (C4)

Adjust the time zone for correct time display:

1. Navegueu fins a C4 page in the settings menu.
2. Premeu el botó L button to start the setting process. The adjustable digit will flash.
3. Premeu el botó R1 button to adjust the time zone value.
4. Premeu el botó R2 button to switch to the minute digits, then press R1 per ajustar-los.
5. Once the time zone is set, press the L botó per confirmar i desar la configuració.
6. Premsa llarga R1 per tornar a la pàgina d'inici.

2.7 Speed Unit Setting (C5)

Switch between Kilometers per Hour (KMH) and Miles per Hour (MPH):

1. Navegueu fins a C5 page in the settings menu.
2. Premeu el botó L button to start the setting process.
3. Premeu el botó R1 button to switch between KMH and MPH.
4. Premeu el botó L botó per confirmar i desar la configuració.
5. Premsa llarga R1 per tornar a la pàgina d'inici.

2.8 Temperature Unit Setting (C6)

Switch between Celsius (°C) and Fahrenheit (°F):

1. Navegueu fins a C6 page in the settings menu.
2. Premeu el botó L button to start the setting process.
3. Premeu el botó R1 botó per canviar entre °C i °F.
4. Premeu el botó L botó per confirmar i desar la configuració.
5. Premsa llarga R1 per tornar a la pàgina d'inici.

2.9 Odograph Setting (C8)

Set the odograph value:

1. Navegueu fins a C8 page in the settings menu.
2. Premeu el botó L button to start the setting process. The adjustable digit will flash.
3. Premeu el botó R1 button to adjust the value of the flashing digit.
4. Premeu el botó R2 button to switch between digits.
5. Once the desired odograph value is set, press the L botó per confirmar i desar la configuració.
6. Premsa llarga R1 per tornar a la pàgina d'inici.

2.10 Customizable Data Fields (via App)

Personalize the data displayed on your M3 screen using the CYCPLUS Fit App:

• Open the CYCPLUS Fit app and navigate to the settings.
• Select "Page Setup" to access the customizable data fields.
• You can choose to display various metrics such as current (NOW), average (AVG), maximum (MAX) values for Heart Rate (HR), Power (PWR), Distance (DST), Altitude (ALT), Time, and Ascent (AST).
• Select your preferred data fields and save the changes to apply them to your M3.

2.11 Data Transmission to Strava

Synchronize your cycling data with Strava for analysis and sharing:

• Open the CYCPLUS Fit app and go to your profile or settings section.
• Locate the option to "Link Strava" and follow the prompts to authorize the connection between the CYCPLUS Fit app and your Strava account.
• Once linked, you can sync your activity records from the app to Strava.

3. Manteniment

3.1 Càrrega

Image: Close-up of the M3 showing the Type-C charging port.

• The M3 uses a USB Type-C charging port.
• Una càrrega completa triga aproximadament 2.5 hores.
• The device offers up to 100 hours of working time on a single charge.

3.2 Impermeabilització

Image: The M3 computer with water droplets, illustrating its IPX6 waterproof rating.

• The CYCPLUS M3 has an IPX6 waterproof rating. This means it is water-resistant and can withstand splashes and rain.
• It is not designed to be submerged in water.

3.3 Atenció general

• Netegeu el dispositiu regularment amb un drap suau iamp tela.
• Eviteu utilitzar productes químics aggressivs o netejadors abrasius.
• Guardeu el dispositiu en un lloc fresc i sec quan no l'utilitzeu.

4. Solució De Problemes

4.1 Factory Reset (C7)

If you encounter persistent issues or wish to clear all settings, you can perform a factory reset:

1. Navegueu fins a C7 page in the settings menu.
2. Premeu el botó L button to start the reset process.
3. Manteniu premut el botó R2 button to restore factory settings. The device will then power off.

4.2 GPS Positioning Issues

Image: The M3 computer with a satellite graphic, illustrating its fast GPS positioning capabilities.

• The M3 uses an AG3352Q chip for fast positioning, typically within 10 seconds.
• To further speed up GPS positioning, download Ephemeris data via the CYCPLUS Fit App. This data is valid for 6 hours.
• Assegureu-vos que esteu en una zona oberta amb claredat view del cel per a una recepció òptima del senyal GPS.
• If the last positioning distance does not exceed 200km in an open and stationary state within 3 days, positioning should be quick.

4.3 Sensor Connection Problems

Image: A cyclist with the M3 computer, showing support for various ANT+ and BLE 5.0 sensors.

• If a sensor is not detected during the ANT+ search (C2 settings), a horizontal line will appear.
• Ensure your external sensors (speed, cadence, heart rate, power meter) are powered on and within range of the M3.
• Check the sensor's battery level.
• Try unpairing and re-pairing the sensors through the C9 and C2 settings pages, respectively.

5. Especificacions

6. Consells d'usuari

• Compatibilitat del sensor: The CYCPLUS M3 is compatible with ANT+ cadence sensors, including those from brands like XOSS. Ensure your sensor supports the ANT+ protocol for connection.
• Personalització de la pantalla: If you can't see specific data like cadence or heart rate on the M3 screen, remember that data fields are fully customizable through the CYCPLUS Fit app. Connect your M3 to the app, go to 'Page Setup' in the settings, and select the metrics you wish to display.
• Retroil·luminació automàtica: The device supports automatic backlight activation between 18:00 and 9:00 after setting your local time zone, improving visibility during low-light conditions.

7. Garantia i Suport

7.1 Informació de la garantia

• A 1-year warranty is provided for the CYCPLUS M3 GPS Bicycle Computer. Please retain your proof of purchase for warranty claims.

7.2 Atenció al client

• For additional support, troubleshooting, or to access advanced features, download and utilize the CYCPLUS Fit App. The app provides a convenient interface for device configuration, data analysis, and firmware updates.