1. Producte acabatview
The Jonsbo TH-Series All-In-One (AIO) CPU Liquid Cooler provides efficient and quiet cooling for your computer's processor. Featuring a digital display on the pump head for real-time CPU temperature monitoring and customizable ARGB lighting, this cooler combines performance with aesthetic appeal. It is designed for broad compatibility with various Intel and AMD CPU sockets.
2. Característiques
- Visualització digital de la temperatura: Cold head features a digital display for real-time CPU temperature monitoring.
- Il·luminació ARGB: Customizable ARGB lighting effects on fans and pump head, synchronizable with motherboard custom light effects via a 3-pin 5V optical interface.
- High-Efficiency Radiator: Features 12 water channels with dense wavy fins for superior heat dissipation, supporting up to 300W D-TDP.
- Optimized Pump Design: High-performance pump with a maximum head of 1.5 meters and flow rate of ≥1300 mL/min, ensuring efficient coolant circulation.
- Base de coure: Slightly convex 37x33mm copper base designed for better contact and coverage of the CPU surface, accelerating heat conduction.
- Durable Water Pipes: EPDM+IIR high-density water pipes with high-pressure fastening and multi-layer sealing techniques for flexural, tensile, and wear resistance.
- Quiet PWM ARGB Fans: Fans operate quietly with noise levels between 21.3-37.3 dB(A) and speeds ranging from 700-2400 RPM, providing air flow of 21.46-62.40 CFM (each fan).
- Cablejat simplificat: The cold exhaust fan uses a single cable for connection to the mainboard, simplifying wiring and promoting a cleaner chassis.
- Àmplia compatibilitat: Supports Intel LGA 2011-3, LGA 2066, LGA 1150, LGA 1155, LGA 1151, LGA1200, LGA 1156, LGA 1700, 1851 and AMD AM4, AM5 sockets.
3. Contingut del paquet
Si us plau, verifiqueu que tots els components siguin presents al paquet:
- Jonsbo TH-Series AIO Liquid Cooler (Radiator with Fans and Pump/Cold Plate)
- Mounting Brackets for Intel Sockets (LGA 1200/115X/17XX/1851, etc.)
- Mounting Brackets for AMD Sockets (AM4/AM5)
- Assorted Screws and Standoffs for various socket types
- Pasta tèrmica
- Thermal Paste Spatula
4. Configuració i instal·lació
Follow these general steps for installing your Jonsbo TH-Series AIO Liquid Cooler. Specific steps may vary slightly depending on your motherboard and PC case. Always refer to your motherboard manual for precise socket installation instructions.
4.1. Preinstal·lació
- Ensure your CPU is properly seated in its socket.
- Clean the CPU surface thoroughly with isopropyl alcohol to remove any old thermal paste or residue.
- Identify the correct mounting brackets and hardware for your CPU socket (Intel LGA 1200/115X/17XX/1851 or AMD AM4/AM5).
4.2. Mounting the Cold Plate/Pump
- Attach the appropriate mounting brackets to the pump unit.
- Apply a small amount of thermal paste to the center of your CPU. Use the provided spatula to spread it evenly into a thin layer, or allow the pressure from the cold plate to spread it naturally.
- Carefully place the pump/cold plate assembly onto the CPU, aligning the mounting holes.
- Secure the pump to the motherboard using the designated screws and standoffs. Tighten screws in a diagonal pattern until snug, but do not overtighten.
4.3. Installing the Radiator and Fans
- Determine the optimal mounting location for the radiator in your PC case (e.g., top, front, or rear). Ensure adequate clearance for the radiator and fans.
- Mount the fans to the radiator using the provided screws. Pay attention to the fan direction for optimal airflow (typically pushing air through the radiator or pulling air from it, depending on case airflow strategy).
- Secure the radiator assembly to your PC case using the appropriate screws.
4.4. Connexions de cablejat
- Connect the pump's power cable to a dedicated AIO_PUMP or CPU_FAN header on your motherboard.
- Connect the fan's 4-pin PWM connector to the CPU_FAN or a SYS_FAN header on your motherboard.
- For ARGB lighting, connect the 3-pin 5V ARGB connector from the cooler to a compatible 3-pin 5V ARGB header on your motherboard or an external ARGB controller. The simplified wiring design allows for a single connection to the mainboard for the fan assembly.
5. Instruccions de funcionament
5.1. Digital Temperature Display
The pump head features an integrated digital display that shows the current CPU temperature. This provides a quick visual reference for your system's thermal status.
5.2. Software Interface and Monitoring
For advanced monitoring and control, Jonsbo provides a dedicated software control panel. This software allows you to view detailed information such as CPU temperature, mainboard model, CPU usage, CPU frequency, and memory usage. It may also offer options for fan speed control and ARGB lighting customization.
5.3. Control d'il·luminació ARGB
The ARGB lighting can be controlled through your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) if connected to a compatible 3-pin 5V ARGB header. Alternatively, if an external ARGB controller is used, refer to its specific instructions for lighting customization.
6. Manteniment
Un manteniment regular ajuda a garantir un rendiment òptim i una llarga durada del refrigerador líquid AIO.
- Neteja de pols: Periodically clean the radiator fins and fan blades using compressed air or a soft brush to remove dust buildup. Dust can impede airflow and reduce cooling efficiency.
- Comprovació de la canonada i les connexions: Occasionally inspect the tubing and connections for any signs of leaks or damage. While the EPDM+IIR pipes are designed for durability, regular checks are recommended.
- Inspecció del ventilador: Ensure fans are spinning freely and quietly. If a fan becomes noisy or stops spinning, it may need replacement.
7. Solució De Problemes
- Sense alimentació/Sense pantalla:
- Check all power connections to the pump and fans. Ensure they are securely plugged into the correct headers on the motherboard.
- Verify that the motherboard's BIOS settings are configured to supply power to the relevant fan/pump headers.
- Temperatures altes de la CPU:
- Assegureu-vos que la bomba estigui en funcionament (és possible que sentiu una lleugera vibració o un brunzit feble).
- Check that the cold plate is making good contact with the CPU. Re-apply thermal paste if necessary.
- Verify that the fans are spinning and oriented correctly for optimal airflow (e.g., pushing air out of the case or pulling fresh air in).
- Netegeu qualsevol acumulació de pols a les aletes del radiador.
- La il·luminació ARGB no funciona/està sincronitzant:
- Ensure the 3-pin 5V ARGB connector is correctly plugged into a compatible header on your motherboard or controller. Do NOT connect to a 12V RGB header, as this can damage the LEDs.
- Check your motherboard's RGB software or external controller settings to ensure the lighting is enabled and configured as desired.
8. Especificacions
The Jonsbo TH-Series AIO Liquid Coolers are available in two main radiator sizes: TH-360 and TH-240. Key specifications are detailed below:
| Característica | TH-360 Model | TH-240 Model |
|---|---|---|
| Tipus de producte | Refrigeració d'aigua integrada | Refrigeració d'aigua integrada |
| Pump Dimensions (L×W×H) | 72 mm × 85.3 mm × 57.5 mm | 72 mm × 85.3 mm × 57.5 mm |
| Radiator Dimensions (L×W×H) | 393 mm × 120 mm × 27 mm | 277 mm × 120 mm × 27 mm |
| Mida del ventilador | 120 mm (x3) | 120 mm (x2) |
| Fan Air Flow (each) | 21.46-62.40 CFM | 21.46-62.40 CFM |
| Coixinet del ventilador | Hidràulica | Hidràulica |
| Velocitat del ventilador | 700-2400 rpm (±10%) | 700-2400 rpm (±10%) |
| Connector de ventilador | PWM 4-pin | PWM 4-pin |
| Fan Noise Level (max) | 21.3-37.3 dB(A) | 21.3-37.3 dB(A) |
| Pump Power Consumption | 5.4W | 5.4W |
| Nivell de soroll de la bomba | ＜30 dB(A) | ＜30 dB(A) |
| Bomba de treball Voltage | 12V DC | 12V DC |
| Velocitat de la bomba | 2400 rpm (±10%) | 2400 rpm (±10%) |
| Sòcols de CPU compatibles | Intel: LGA 2011-3, 2066, 1150, 1155, 1151, 1200, 1156, 1700, 1851; AMD: AM4, AM5 | Intel: LGA 2011-3, 2066, 1150, 1155, 1151, 1200, 1156, 1700, 1851; AMD: AM4, AM5 |
| Material del dissipador de calor | coure | coure |
| Suport RGB | A-RGB (5V 3-pin) | A-RGB (5V 3-pin) |
| Certificacions | CE, RoHS | CE, RoHS |
9. Consells d'usuari
- Orientació del ventilador: When installing the fans on the radiator, consider your case's overall airflow. Fans can be configured to push air through the radiator (intake) or pull air through it (exhaust). Ensure consistent direction for all fans on the radiator.
- Socket 1851 Mounting: For newer sockets like LGA 1851, ensure you are using the correct mounting hardware and following the specific instructions provided for that socket type. Double-check the alignment of the backplate and standoffs before securing the pump.
- Gestió de cables: Utilize the simplified wiring design to keep your build clean. Route cables behind the motherboard tray where possible to improve aesthetics and airflow.
10. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact your retailer or the official Jonsbo customer support channel. Keep your proof of purchase for warranty claims.
