1. Introducció
This manual provides detailed instructions for the installation, adjustment, and maintenance of your new stainless steel watch bracelet strap. Designed for compatibility with the LIGE K52 1.39" Smartwatch and other smartwatches requiring 20mm or 22mm band widths, this strap offers both durability and style. Please read these instructions carefully before use to ensure proper fitting and care.
2. Especificacions
| Característica | Detall |
|---|---|
| Tipus d'element | Cintes de rellotge |
| Tipus de material de la banda | Acer inoxidable |
| Marca compatible | LIGE K52 1.39" Smartwatch, Other Smartwatches |
| Band Width Options | 20 mm, 22 mm |
| Band Color Options | Black, Silver (various finishes) |
| Dimensions del paquet | 19 cm (L) x 14 cm (A) x 5 cm (Al) |
| Pes del paquet | 0.1 kg |
3. Contingut del paquet
El vostre paquet ha de contenir els elements següents:
- 1 x Stainless Steel Watch Bracelet Strap (Link or Mesh style, depending on selection)
- 1 x Link Removal Tool (included with link-style bands)
Image: Silver link band and included link removal tool.
4. Instal·lació
Both link and mesh style bands feature quick-release pins for easy installation without additional tools.
4.1 Attaching the Link Band
- Locate the quick-release pins on the back of the watch band.
- Align one end of the pin with the lug hole on your smartwatch.
- Pull the quick-release lever to retract the pin, then position the other end into the opposite lug hole.
- Release the lever to secure the pin. Gently tug on the band to ensure it is firmly attached.
Image: Diagram illustrating quick release pins for easy installation of the link band.
4.2 Attaching the Mesh Band
- Identify the quick-release pins on the mesh band.
- Insert one end of the pin into the lug hole on your smartwatch.
- Retract the quick-release lever and guide the other end of the pin into the corresponding lug hole.
- Release the lever to lock the pin in place. Verify the band is securely fastened by gently pulling on it.
Image: Diagram illustrating quick release pins and the double-locked buckle mechanism for the mesh band.
5. Adjusting the Band Length
5.1 Adjusting Link Bands
To adjust the length of your link-style band, you will need the included link removal tool.
- Place the band on the link removal tool with the arrow on the band pointing towards the tool's pin.
- Turn the screw on the tool to push out the pin from the link.
- Elimineu el nombre desitjat d'enllaços.
- Reassemble the band by inserting the pins back into the links, ensuring the arrows on the links point in the correct direction for re-insertion.
Image: Step-by-step guide on how to remove links from a metal watch band using the provided tool.
5.2 Adjusting Mesh Bands
Mesh bands feature an adjustable clasp for a custom fit.
- Open the band cover.
- Open the clasp cover.
- Insert a small tool (like the pin of the link removal tool) into the hole on the clasp and press down to open the pin case.
- Feu lliscar el tancament al llarg de la banda de malla fins a la longitud desitjada.
- Close the pin case and then the clasp cover to secure the adjustment.
Image: Step-by-step guide on how to adjust the length of a mesh watch band by repositioning the clasp.
6. Cura i Manteniment
- Neteja: Netegeu la banda regularment amb un drap suauamp cloth to remove dirt and oils. For a deeper clean, use a mild soap solution and rinse thoroughly, then dry completely.
- Eviteu productes químics: Do not expose the band to harsh chemicals, solvents, or strong detergents, as these can damage the stainless steel finish.
- Emmagatzematge: Store your watch band in a clean, dry place when not in use to prevent scratches and maintain its appearance.
- Inspecció: Periodically check the quick-release pins and clasp for any signs of wear or damage to ensure secure attachment to your smartwatch.
7. Solució De Problemes
- Band not attaching securely: Ensure the quick-release pins are fully engaged in the lug holes. Sometimes, a small amount of force or wiggling is needed to seat them properly. Check for any obstructions in the lug holes.
- Difficulty adjusting link band: Make sure the link removal tool's pin is correctly aligned with the band's pin. Apply steady, even pressure. If a pin is stuck, ensure it's not bent.
- Mesh band clasp not holding: Verify that the clasp's pin case is fully closed and locked after adjustment. The double-locked mechanism needs to be securely fastened.
- Irritació de la pell: While stainless steel is generally hypoallergenic, ensure the band is clean and dry. If irritation persists, consult a dermatologist.
8. Consells d'usuari
- When installing, always ensure both ends of the quick-release pin click into place for a secure fit.
- For link bands, remove links symmetrically from both sides of the clasp to keep the clasp centered on your wrist.
- If you find the link removal tool difficult to use, a local watch repair shop can often adjust the band for a small fee.
- Regular cleaning not only maintains appearance but also prevents accumulation of debris that could affect the quick-release mechanism.
9. Garantia i Suport
This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For warranty claims or technical support, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
