1. Introducció
The DDPAI Smart Hardwire Kit is designed to provide continuous power to your DDPAI dash cam, enabling 24-hour parking monitoring and protecting your vehicle's battery. This kit features multiple safety protections and intelligent power management for reliable operation.
Contingut del paquet:
- DDPAI Smart Hardwire Kit (cable with power module)
- Aixetes de fusibles
- Clau anglesa
- Manual d'usuari
2. Especificacions
| Característica | Descripció |
|---|---|
| Nom del model | DDPAI Hardware Kit |
| Compatibilitat | DDPAI Z50/Z60/Z60 Pro, Mini5, Z40, N1, N3 Pro, N5 Dual Dash Cam |
| Entrada Voltage | 12V-24V |
| Vol. De sortidatage / Actual | 5 V / 3 A |
| Longitud del cable | 3.2 metres |
| Interfície | Tipus C USB |
| Característiques especials | 24 Hour Parking Monitor, IPS Power Management Technology, Time-Lapse Recording |
| Proteccions de seguretat | Volum baixtage Protection, Overcurrent Protection, Short Circuit Protection, Overload Protection, Reverse Connection Protection, Battery Drain Protection, Overheat Protection |
| Volum baixtage Tall | Automatically cuts off when voltage below 11.8V, 12V, or 12.4V (configurable/automatic) |
| Material | ABS |
| Pes de l'article | 0.2 kg |
3. Configuració i instal·lació
The DDPAI Smart Hardwire Kit is designed for simple installation, eliminating the need for a car cigarette lighter socket and providing a cleaner look for your car's interior.
Passos d'instal·lació:
- Identify Fuse Box: Locate your car's fuse box. Its location may vary depending on the car brand and model.
- Connect Ground Wire (GND): Connect the black wire (GND) to a metal part of the car chassis, typically a bolt or screw, to ensure a proper ground connection.
- Connect ACC Wire: Connect the red wire (ACC) to a fuse that is only powered when the car's ignition is on. This allows the dash cam to detect when the vehicle is running.
- Connect BAT Wire: Connect the yellow wire (BAT) to a fuse that has constant power, even when the car is off. This provides continuous power for parking monitoring.
- Cable de ruta: Carefully route the 3.2-meter Type-C USB cable from the fuse box to your dash cam, ensuring it is tucked away neatly and does not obstruct driving.
- Connecteu-vos a la Dash Cam: Plug the Type-C USB connector into your DDPAI dash cam.
Nota important:
Always consult your vehicle's owner's manual or a professional for specific fuse box locations and safe wiring practices. Incorrect wiring can damage your vehicle's electrical system or the dash cam.
4. Instruccions de funcionament
Once correctly installed, the DDPAI Smart Hardwire Kit will automatically manage power to your dash cam based on your vehicle's status.
Automatic Parking Monitoring:
The kit intelligently recognizes vehicle status. When your car is parked and the ignition is off, the hardwire kit will enable 24-hour parking monitoring mode on your compatible DDPAI dash cam. This typically involves time-lapse recording or event-based recording to conserve power.
Intelligent Power Management (IPS):
The integrated IPS management system ensures efficient power delivery and protection for both your dash cam and car battery.
Volum baixtage Protecció:
To prevent draining your car's battery, the hardwire kit features low voltage protection. It will automatically cut off power to the dash cam if the car battery voltage drops below a preset threshold (e.g., 11.8V, 12V, or 12.4V). This ensures enough power remains to start your vehicle.
5. Característiques i proteccions de seguretat
The DDPAI Smart Hardwire Kit incorporates multiple layers of protection to ensure the safety and longevity of your dash cam and vehicle's electrical system.
- Protecció de sobrecàrrega: Evita danys per un consum excessiu de corrent.
- Volum baixtage Protecció: Automatically cuts off power to prevent car battery drain.
- Protecció contra curtcircuits: Mesures de seguretat contra curtcircuits elèctrics.
- Protecció sobre corrent: Protects against current surges.
- Protecció de connexió inversa: Prevents damage from incorrect wiring polarity.
- Protecció contra el descàrrega de la bateria: Specifically designed to monitor and protect your car's battery during parking mode.
- Protecció contra el sobreescalfament: Monitors the device temperature to prevent overheating.
6. Manteniment
The DDPAI Smart Hardwire Kit requires minimal maintenance. Follow these guidelines to ensure optimal performance:
- Comprovacions periòdiques: Reviseu periòdicament les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
- Integritat del cable: Inspect the cable for any signs of wear, cuts, or damage. Replace if necessary.
- Neteja: Keep the power module and connections free from dust and debris.
- Actualitzacions de firmware: Ensure your DDPAI dash cam's firmware is up to date, as this may include improvements related to hardwire kit compatibility and power management.
7. Solució De Problemes
If you encounter issues with your DDPAI Smart Hardwire Kit, refer to the following troubleshooting tips:
La càmera del salpicader no s'encén:
- Comproveu les connexions: Ensure all wires (GND, ACC, BAT, and Type-C USB) are securely connected.
- Comprovació de fusibles: Verify that the fuses used for ACC and BAT connections are not blown. Replace if necessary.
- Bateria del vehicle: Check your car's battery voltage. If it's too low, the hardwire kit's low voltage protection might have activated.
- Dash Cam Functionality: Test your dash cam with a standard car charger to rule out issues with the dash cam itself.
El monitor d'aparcament no funciona:
- ACC/BAT Wiring: Double-check that the ACC and BAT wires are connected to the correct fuse types (ACC to ignition-switched, BAT to constant power).
- Dash Cam Settings: Ensure parking monitoring mode is enabled in your DDPAI dash cam's settings.
- Volum baixtage Tall: If your car battery is frequently low, the hardwire kit might be cutting power prematurely. Consider adjusting the low voltage cut-off setting if your dash cam or hardwire kit allows it, or have your car battery checked.
Potència intermitent:
- Connexions soltes: Inspect all connections for looseness.
- Damaged Cable: Check the hardwire cable for any visible damage.
8. Garantia i Suport
For warranty information and technical support, please refer to the official DDPAI weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
DDPAI Contact Information:
- Weblloc: www.ddpai.com
- Correu electrònic: feedback@ddpai.com
9. Consells d'usuari
- Compatibilitat: This hardwire kit is compatible with DDPAI dash cams that use a Type-C USB port for power, including models like Z50, Z60, Z60 Pro, Mini5, Z40, N1, N3 Pro, and N5 Dual.
- Selecció de fusibles: When connecting to the fuse box, use an add-a-circuit fuse tap to avoid cutting original vehicle wiring and to ensure proper protection. Always use fuses of the correct amperage.
- Instal·lació professional: If you are unsure about wiring or working with your car's electrical system, it is highly recommended to seek professional installation to prevent damage to your vehicle or the hardwire kit.
