Manual d'usuari del simulador d'entrenament de drons STARTRC S8 FPV amb control remot

Introducció

This manual provides essential information for the safe and effective use of your STARTRC S8 FPV Drone Training Simulator Remote Control Handle. Please read it thoroughly before use to ensure proper setup and operation.

Informació de seguretat

⚠️ Només per a ús recreatiu. Es prohibeix la modificació il·legal de drons/avions. Si us plau, presteu atenció també a les lleis i regulacions pertinents sobre l'ús de drons/avions al vostre país/zona per garantir-ne un ús legal.

Contingut del paquet

Si us plau, verifiqueu que tots els elements que s'enumeren a continuació estiguin inclosos al vostre paquet:

• Flight Simulator Controller × 1
• Metal Joysticks × 2
• USB Type-C to USB-A Cable × 1
• Chinese and English User Manual × 1

Producte acabatview

The STARTRC S8 FPV Drone Training Simulator Remote Control Handle is designed to provide a realistic and immersive FPV drone flight training experience. It features a smooth body design for comfortable grip and precise control, allowing for seamless transitions between virtual and real FPV drone flights.

Components del controlador

• Front Joystick:
  1. Throttle/Yaw Stick
  2. Pitch/Roll Stick
  3. Anell LED
  4. Botó d'engegada
• Rear Joystick:
  5. Interruptor A
  6. Canvia C
  7. Interruptor B
  8. Interruptor D.

Configuració

1. Connecteu el controlador: Use the provided USB Type-C to USB-A cable to connect the STARTRC S8 controller to your computer (Windows, macOS, HarmonyOS) or mobile device (Android, iOS, HarmonyOS). The controller supports hot-plug-and-play functionality.
2. Instal·lació sense controladors: The controller is designed for driver-free installation. No additional firmware downloads or installations are required for desktop or laptop use.
3. Font d'alimentació: The controller utilizes a USB-C PD power supply solution, eliminating the need for batteries and enabling long-duration simulation training.

Instruccions de funcionament

1. Reconeixement del dispositiu: Once connected, the controller should be automatically recognized by your operating system as a game controller or joystick.
2. Launch Simulator Software: Open your preferred FPV flight simulator application on your PC or mobile device.
3. Configure Controller: Navigate to the controller settings or input mapping section within your simulator. The STARTRC S8 offers 8-channel PPM signal output. Map the throttle, pitch, roll, and yaw axes, along with the 2 three-position toggle switches and 2 two-position toggle switches, to your desired functions within the simulator.
4. Començar l'entrenament: Begin your FPV flight training. The aircraft-grade control system with dual-ball bearing structure and composite damping system accurately replicates dynamic feedback for realistic simulation.

Compatibilitat

The STARTRC S8 FPV Drone Training Simulator Remote Control Handle offers broad compatibility:

Simuladors compatibles:

• Enlairament
• DRL (Drone Racing League)
• DCL (Drone Champions League)
• AI Drone Simulator
• TRY P FPV
• Uncrashed
• Freerider
• Velocidrone
• FPV LOGIC
• SkyDive
• FPV Worldwide
• FPV Battleground
• DJI Virtual Flight (Note: Low-end versions may not be supported)

Sistemes operatius compatibles:

• PC: Windows 10/11, HarmonyOS, macOS Monterey or later.
• Mòbil: Android 8.0+, iOS 14+, HarmonyOS 2.0+.

The controller features a proprietary low-latency communication protocol, ensuring end-to-end operation latency of ≤8ms across compatible platforms.

Especificacions

Manteniment

• Neteja: Keep the controller clean and dry. Use a soft, dry cloth to wipe down the surface. Avoid using harsh chemicals or abrasive materials.
• Emmagatzematge: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures. Ensure joysticks and switches are not under pressure during storage to prevent damage.
• Manipulació: Handle the controller with care. Avoid dropping it or subjecting it to strong impacts.

Resolució de problemes

• Controlador no reconegut:
  • Ensure the USB cable is securely connected to both the controller and your device.
  • Try connecting to a different USB port or using an alternative USB Type-C to USB-A cable.
  • Reinicieu l'ordinador o el dispositiu mòbil.
  • Check your device's system settings (e.g., Device Manager on Windows, System Information on macOS) to confirm if the controller is detected.
• No Response in Simulator:
  • Verify that the STARTRC S8 controller is selected as the primary input device within your simulator's settings.
  • Perform a joystick calibration within the simulator software if the option is available.
  • Ensure your simulator software is updated to the latest version.
• Input Lag or High Latency:
  • Confirm that your computer or mobile device meets the minimum system requirements for the FPV simulator you are using.
  • Close any unnecessary applications running in the background to free up system resources.
  • For mobile devices, ensure a stable connection and sufficient processing power.

Consells per a l'usuari

• For optimal performance and access to the latest features, ensure your FPV simulator software is always updated.
• Experiment with different joystick tension settings within your simulator to find what feels most comfortable and responsive for your personal flying style.
• Utilize the custom auxiliary channel functions to map frequently used commands or flight modes for a more efficient and personalized training experience.

Certificacions

The STARTRC S8 FPV Drone Training Simulator Remote Control Handle is certified with CE, FCC, PSE (EMC), and CPSC (CPC) compliance, and meets ROHS 2.0 certification standards.

Garantia i Suport

For technical support, warranty claims, or further assistance with your STARTRC S8 FPV Drone Training Simulator Remote Control Handle, please contact STARTRC Official Store customer service through their official channels.