Introducció
This manual provides essential information for the safe and efficient operation of your YUER 25x30W LED Matrix Stage Lighting. Please read these instructions carefully before installation and use, and retain them for future reference.
Especificacions del producte
| Característica | Especificació |
|---|---|
| Voltage | AC100-240V, 50/60HZ |
| Poder | 300W |
| Font de llum | 25pcs*30W RGBW 4in1 LEDs |
| Dimmer | 0-100% electronic dimmer |
| Strobe | 0-25 flashes/second |
| Canals DMX | 02/04/06/09/100/102/104 (single point control) |
| Nivell de protecció | IP20 |
| Pes net | 7.2 KG |
| Mida de l'embalatge | 53 x 53 x 15 CM |
| Pes brut | 9.5 KG |
| Bombetes incloses | No (LEDs are integrated) |
| Font d'alimentació | DC |
| Flux lluminós | 249-2000 |
| Mètode d'instal·lació | Autònom |
| Certificació | CE |
| Tipus d'element | StagEfecte d'il·luminació |
| Ocasió | Professional Stage & DJ |
Dimensions: 48cm (Width) x 48cm (Height) x 4.5cm (Depth)
Informació de seguretat
- Always connect to a grounded power outlet.
- Assegureu-vos una ventilació adequada per evitar el sobreescalfament.
- No ho feu funcionar si el cable d'alimentació està danyat.
- Eviteu l'exposició directa dels ulls a la font de llum.
- Mantenir allunyat de materials inflamables.
- Només personal qualificat ha de realitzar el manteniment o les reparacions.
Configuració
- Desembalatge i inspecció: Carefully remove the lighting unit from its packaging. Inspect for any damage during transit. Report any damage to the supplier immediately.
- Muntatge: The unit features an adjustable stand for self-contained placement. Ensure the unit is placed on a stable, level surface or securely mounted using appropriate clamps and safety cables (not included) if suspended.
- Connexió d'alimentació: Connect the power cable to the unit and then to a suitable AC100-240V, 50/60HZ grounded power outlet.
- Connexió DMX (opcional): For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the lighting unit. If linking multiple units, connect from the DMX OUT of the first unit to the DMX IN of the next, and so on.
Instruccions de funcionament
- Encès: Connect the unit to power. The digital display on the rear panel will illuminate.
- Selecció del mode: Use the buttons on the rear control panel to navigate through different operating modes (e.g., DMX mode, Auto mode, Sound-activated mode). Refer to the display for current mode.
- Control DMX: If using DMX, set the DMX address using the control panel. The unit supports various DMX channel modes (02/04/06/09/100/102/104) for different levels of control, including single point control for individual LEDs.
- Atenuació i llum estroboscòpica: In manual or DMX mode, adjust the dimmer from 0-100% for brightness control. The strobe function allows for adjustable flash rates from 0-25 flashes per second.
- Barreja de colors: The RGBW 4in1 LEDs allow for a wide spectrum of colors. In DMX mode, individual RGBW values can be controlled to create custom colors and wash effects.
Manteniment
- Neteja: Regularly clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.
- Ventilació: Keep ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating.
- Emmagatzematge: Quan no l'utilitzeu, guardeu la unitat en un lloc sec i sense pols, preferiblement en el seu embalatge original o en una funda protectora.
- Inspecció del cable: Periodically check power and DMX cables for any signs of wear or damage. Replace damaged cables immediately.
Resolució de problemes
- Sense energia:
- Comproveu si el cable d'alimentació està connectat correctament tant a la unitat com a la presa de corrent.
- Comproveu que la presa de corrent funcioni.
- Inspeccioneu el cable d'alimentació per detectar qualsevol dany.
- Sense sortida de llum:
- Ensure the unit is powered on and in an active mode.
- If in DMX mode, check DMX signal and controller settings.
- Verify dimmer settings are not at 0%.
- Problemes de control DMX:
- Check DMX cable connections and ensure they are 3-pin or 5-pin XLR as required.
- Verify the DMX address on the unit matches the address set on your controller.
- Ensure the DMX channel mode selected on the unit matches your controller's programming.
- Use a DMX terminator on the last unit in a DMX chain.
- Sobreescalfament:
- Assegureu-vos que hi hagi una ventilació adequada al voltant de la unitat.
- Clean any dust or debris from the cooling fans and vents.
- No bloquegeu les entrades o sortides d'aire.
Consells per a l'usuari
- Experiment with different DMX channel modes to find the best balance between control granularity and channel usage for your setup.
- Utilize the RGBW mixing capabilities to create unique color palettes for various events.
- For dynamic effects, synchronize multiple units using DMX to create impressive matrix patterns.
- Always test your lighting setup in a controlled environment before a live event.
Garantia i Suport
This product comes with a manufacturer's quality warranty, typically ranging from 1 to 3 years. For any quality issues or technical support, please contact your seller or the manufacturer directly. Provide your purchase details and a clear description of the issue for prompt assistance.
