Introducció
This manual provides detailed instructions for the proper setup, operation, and maintenance of your FiiO Coaxial Adapter (TRRS). This adapter is designed to provide a coaxial digital audio output from compatible FiiO portable audio players, allowing connection to external DACs or amplifiers with coaxial input capabilities. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
Figure 1: FiiO Coaxial Adapter (TRRS) - Front View
Contingut del paquet
- FiiO Coaxial Adapter (TRRS)
- (No other items explicitly mentioned)
Instruccions de configuració
The FiiO Coaxial Adapter (TRRS) is designed for specific FiiO portable audio players that support coaxial digital output via their TRRS (Tip-Ring-Ring-Sleeve) headphone jack. Ensure your FiiO device is compatible before attempting connection.
- Identify the TRRS Port: Locate the 3.5mm TRRS headphone/line-out port on your compatible FiiO audio player.
- Connecteu l'adaptador: Insert the TRRS plug of the FiiO Coaxial Adapter into the TRRS port of your FiiO audio player. Ensure it is fully seated.
- Connect to External Device: Connect a standard coaxial digital audio cable (not included) from the RCA coaxial jack on the FiiO Coaxial Adapter to the coaxial digital input of your external DAC or ampmés viu.
- Configure Audio Player: Access the settings menu on your FiiO audio player and ensure that the digital coaxial output is enabled and correctly configured. Refer to your FiiO player's user manual for specific instructions on enabling coaxial output.
Figure 2: TRRS Pinout Diagram for FiiO Coaxial Adapter. The diagram indicates 'Not connected' for the first two rings, 'Ground' for the third ring, and 'Signal' for the sleeve, which is typical for a coaxial output from a TRRS jack.
Instruccions de funcionament
Once the adapter is correctly connected and your FiiO audio player is configured for coaxial output:
- Ensure your external DAC/amplifier is powered on and set to the correct coaxial input.
- Start playback on your FiiO audio player.
- Audio should now be transmitted digitally from your FiiO player, through the coaxial adapter, to your external audio equipment.
The adapter acts as a passive converter, transmitting the digital audio signal. Volume control and other audio processing will typically be handled by the connected FiiO player or the external DAC/ampmés viu.
Manteniment
- Keep the adapter clean and dry. Avoid exposure to liquids or excessive moisture.
- Use a soft, dry cloth to gently wipe the adapter if it becomes dirty. Do not use harsh chemicals or abrasive cleaners.
- Guardeu l'adaptador en un lloc fresc i sec quan no l'utilitzeu.
- Avoid bending or twisting the cable excessively, as this can damage the internal wiring.
Resolució de problemes
Especificacions
Note: Package dimensions and weight are approximate and may vary. Product dimensions are not explicitly provided.
Consells per a l'usuari
- Always ensure your FiiO player's firmware is up to date for the best compatibility and performance with accessories.
- When connecting, push the TRRS plug firmly into the player's jack until you feel a click to ensure a secure connection.
- If experiencing issues, try restarting both your FiiO player and the external DAC/ampmés viu.
Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de FiiO. website or contact the authorized FiiO dealer from whom you purchased the product. Keep your proof of purchase for any warranty claims.
If you encounter issues not covered in this manual, please reach out to FiiO customer service or your retailer for further assistance.
