1. Introducció
This manual provides essential information for the proper installation, operation, and maintenance of your SIYI MK15 and MK32 series drone accessories. Please read this manual thoroughly before using the products to ensure safe and efficient operation. These accessories are designed to enhance the functionality and performance of your drone systems.
For any specific doubts or if you require accessories not listed, please contact customer service for assistance.
2. Informació de seguretat
Exempció de responsabilitat: Només per a ús recreatiu. Es prohibeix la modificació il·legal de drons/avions. Si us plau, presteu atenció també a les lleis i regulacions pertinents sobre l'ús de drons/avions al vostre país/zona per garantir-ne l'ús legal.
- Always ensure all connections are secure and correct before powering on.
- Verify power input and output specifications to prevent damage to components.
- Manipuleu els components electrònics amb cura per evitar descàrregues electrostàtiques.
- Keep components away from moisture and extreme temperatures.
- Regularly inspect cables and connectors for wear and tear.
3. Producte acabatview i Especificacions
The SIYI MK15 and MK32 series offer a range of original accessories designed for various drone applications. Below are the key components and their specifications:
3.1 4S-18S BEC Module
- Entrada d'alimentació (XT60): 14.8 ~ 66.6V
- Power Output (XT30): 12 V
- Dimensions (L x A x A): 51 x 32 x 16 mm
- Pes: 44 g
3.2 HM30 MFD Crossbow Mini Auto Antenna Tracker
- Vol. Operatiutage: 7 ~ 12V
3.3 R1M HD Recording Camera
- Resolució: 720p @ 30fps
- Característiques: Supports TF card HD video recording, TF card firmware update, HD video display and OSD overlay in SIYI FPV app.
- Dimensions (L x A x A): 43 x 43 x 25 mm (cable excluded)
- Pes: 39 g
3.4 N7 Autopilot Anti-vibration Board
Designed to reduce vibrations for the N7 Autopilot system, ensuring stable flight and sensor accuracy.
3.5 MK15 / HM30 Standard Antenna
- Tipus: Omnidireccional
- Quantitat: Dues peces
- Dimensions (L x W x H, extended): 18 x 9 x 8 mm
- Pes: 16 g
3.6 MK15 Long Range Antenna
- Interval: 15-KM Long Range
- Tipus: Direccional
- Quantitat: Dues peces
- Dimensions (L x W x H, extended): 60 x 69 x 60 mm
- Pes: 36 g
3.7 MK15 / MK15E IP67 Camera - A
- Resolució: 1080p @ 50fps
- Angle de càmera: 120 graus
- Característiques: Dual Searchlights, Ethernet Port
- Dimensions (L x W x H, cable excluded): 30 x 115 x 48 mm
- Pes: 91 g
- Adreça IP predeterminada: 192.168.144.25
3.8 MK15 Air Unit
Designed for the MK15 Agriculture Version, providing essential communication and control capabilities.
3.9 HM30 Long Range Antenna
- Interval: 15-KM Long Range
- Tipus: Direccional
- Quantitat: Dues peces
- Dimensions (L x W x H, extended): 60 x 69 x 60 mm
- Pes: 36 g
3.10 HM30 Air Unit Input Converter (HDMI)
- Entrada: Micro-HDMI
- Sortida: Port Ethernet
- Dimensions (L x A x A): 42 x 42 x 11 mm
- Pes: 24 g
3.11 MK15 / MK15E IP67 Camera - B
- Resolució: 1080p @ 50fps
- Angle de càmera: 120 graus
- Característiques: Dual Searchlights, Ethernet Port
- Dimensions (L x W x H, cable excluded): 30 x 115 x 48 mm
- Pes: 91 g
- Adreça IP predeterminada: 192.168.144.26
3.12 ZT30 Quick Release Anti-Vibration Claw
A quick-release mechanism with anti-vibration properties, likely for mounting payloads or cameras.
Mòdul GPS 3.13 M9N
High-precision GPS module for accurate positioning and navigation.
3.14 HM30 DUAL Air Unit
Designed for MK32 / HM30 / MK15 Dual Combo systems, offering enhanced communication and control.
3.15 HM30 Air Unit
Designed for MK32 / HM30 / MK15 Enterprise Version systems, providing robust communication and control.
3.16 Hall-Sensor Power Module
Provides power management and current sensing for drone systems.
3.17 MK15 Dual FPV Camera Hub
- Funcionalitat: Two-way input, one-way output
- Connectivitat: Port Ethernet
- Dimensions (L x A x A): 35 x 45 x 13 mm
- Pes: 15 g
4. Configuració i instal·lació
Installation procedures vary depending on the specific accessory and your drone model. Always refer to the detailed wiring diagrams and connection guides provided with your main SIYI system (e.g., MK15 or MK32 remote controller/air unit) for precise instructions.
- Power Modules (BEC, Hall-Sensor): Connect the power input (e.g., XT60) to your drone's main battery. Ensure the output (e.g., XT30) is connected to the appropriate component requiring 12V power. Verify polarity before connecting.
- Air Units (MK15, HM30, HM30 DUAL): These are central communication units. Mount them securely on your drone, ensuring proper ventilation. Connect antennas to the designated ports. Follow the specific wiring diagram for connecting to your flight controller, camera, and other peripherals.
- Antennas (Standard, Long Range): Mount antennas in a clear line of sight, away from metallic obstructions. Ensure they are securely fastened and oriented correctly for optimal signal reception (directional antennas require careful aiming).
- Cameras (R1M, MK15/MK15E IP67): Mount the camera in a position that provides the desired field of view. Connect the camera to the air unit or camera hub via the Ethernet port. For R1M, insert a TF card for recording.
- Camera Hubs (MK15 Dual FPV): Connect FPV cameras to the input ports and the output to the air unit. Ensure proper configuration for two-way input and one-way output as per your setup.
- GPS Modules (M9N): Mount the GPS module in an elevated position, away from interference sources (e.g., power lines, motors). Ensure it has a clear view of the sky for accurate satellite acquisition.
- Anti-vibration Boards/Claws (N7 Autopilot, ZT30): Install these components to isolate sensitive electronics or payloads from drone vibrations. Follow mounting instructions to ensure effective vibration dampening.
Always double-check all connections before powering on your drone system to prevent damage.
5. Instruccions de funcionament
Once all accessories are correctly installed and connected, follow the operating procedures for your main SIYI remote controller and air unit system.
- Seqüència d'encesa: Typically, power on the remote controller first, then the drone.
- Comprovació del sistema: After powering on, perform a pre-flight check. Verify all accessories are recognized and functioning correctly through your FPV app or ground control station.
- Funcionament de la càmera: For cameras with recording capabilities (e.g., R1M), ensure the TF card is inserted and formatted. Use the FPV app to start/stop recording, adjust camera settings, and view alimentació en directe.
- Antenna Tracker (HM30 MFD Crossbow Mini): If using an auto antenna tracker, ensure it is calibrated and configured to follow your drone's position for optimal signal strength.
- GPS Module (M9N): Allow sufficient time for the GPS module to acquire satellites before flight. Monitor GPS status in your ground control software.
- Monitorització de potència: If using a Hall-Sensor Power Module, monitor battery voltage and current draw through your OSD or ground control station to ensure safe operation.
6. Manteniment
Regular maintenance ensures the longevity and reliable performance of your SIYI accessories.
- Neteja: Keep all components clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. For IP67 rated cameras, ensure seals are intact and clean gently.
- Integritat de la connexió: Periodically check all cables and connectors for signs of wear, corrosion, or loose connections. Replace damaged cables immediately.
- Actualitzacions de firmware: Check the official SIYI website for firmware updates for your air units, cameras, and other smart accessories. Follow update instructions carefully.
- Emmagatzematge: Store accessories in a dry, cool place, away from direct sunlight and extreme temperatures, when not in use.
7. Solució De Problemes
Si teniu problemes, consulteu els passos habituals següents per a la resolució de problemes:
| Problema | Causa possible | Solució |
|---|---|---|
| No video feed from camera | Loose cable connection, incorrect camera IP, power issue, firmware mismatch. | Check all cable connections. Verify camera IP address (e.g., 192.168.144.25/26). Ensure camera is receiving power. Update camera and air unit firmware. |
| Senyal GPS no adquirit | Obstruït view of sky, interference, faulty module. | Move to an open area. Ensure GPS module is away from power lines/motors. Check module connection. |
| Air Unit not connecting to remote controller | Binding issue, antenna problem, power issue. | Re-bind the air unit and remote controller. Check antenna connections. Ensure air unit is powered correctly. |
| BEC Module not providing 12V output | Vol d'entrada incorrectatage, faulty module, short circuit on output. | Verifiqueu el volum d'entradatage is within 14.8-66.6V. Check for short circuits on the 12V output. Test with a multimeter. |
If the problem persists, contact SIYI technical support.
8. Consells d'usuari
- Gestió de cables: Organize and secure all cables to prevent interference, snagging, and wear. Use zip ties or cable sleeves.
- Col·locació de l'antena: Experiment with antenna placement on your drone to find the optimal configuration for signal strength and range, especially for directional antennas.
- Actualitzacions de firmware: Always keep your SIYI devices updated to the latest firmware versions to benefit from performance improvements and bug fixes.
- Redundància d'energia: For critical components, consider power redundancy solutions where applicable to enhance reliability.
- Protecció del medi ambient: While some components are IP67 rated, always take precautions against extreme weather conditions, dust, and moisture to prolong product life.
9. Quality Assurance and Manufacturing Process
SIYI products are manufactured using high-standard processes to ensure quality and reliability. The manufacturing process includes:
- Integrated SMT placement and inspection systems for high efficiency and quality.
- High-precision automatic solder paste printing equipment.
- Advanced 3D online AOI equipment for multi-dimensional inspection.
- First-piece testing instruments with testing accuracy up to 0.05%.
Video: SIYI Manufacturing Process showcasing quality control and precision assembly.
10. Garantia i Suport
SIYI provides quality products and aims for customer satisfaction. For warranty claims, technical support, or service inquiries, please contact your original point of purchase or refer to the official SIYI website for detailed warranty policies and support contact information.
Si us plau, conserveu el comprovant de compra per motius de garantia.
