1. Introducció
The yieryi Flagship Model Smart Pool Chlorine Monitor (YY-1099L+G06-W) is an advanced 7-in-1 water quality testing device designed for swimming pools, spas, and hot tubs. It accurately measures pH, Chlorine (CL), Oxidation-Reduction Potential (ORP), Total Dissolved Solids (TDS), Electrical Conductivity (EC), Salinity (SALT), and Temperature. This smart monitor provides real-time data synchronization via the Tuya/Smart Life app, offering convenient remote monitoring and alerts to help maintain optimal water quality.
2. Producte acabatview
2.1 Característiques clau
- 7-in-1 Water Quality Monitoring: Measures pH, Chlorine (CL), ORP, TDS, EC, Salt, and Temperature.
- Smart WiFi Connectivity: Connects via 2.4GHz WiFi and a Zigbee Gateway to the Tuya/Smart Life app for real-time data and alerts.
- Modes de càrrega dual: Equipped with an efficient solar panel and a USB charging port for continuous operation.
- Floating & Waterproof Design: IP68 waterproof rating, designed to float on the water surface, suitable for various pool types (saltwater, chlorinated, hot tubs, jacuzzis).
- Alta precisió: Offers accurate readings with multi-point calibration and temperature compensation.
- Monitorització remota: View all water quality data from anywhere on your smartphone or tablet.
- Compartició de dades: Supports multi-user access for family accounts to share data.
3. Contingut del paquet
Marqueu la casella per als elements següents:
- 1 × Smart Pool Monitor (YY-1099L)
- 1 × Zigbee Gateway (G06-W)
- 1 × cable de càrrega USB
- 1 × Tornavís
- 1 × Water Valve Box
- 1 × Manual d'instruccions (aquest document)
- 4 × Calibration Solutions (PH4.00, PH7.00, PH10.01, ORP222mV)
4. Guia de configuració
4.1 Instal·lació de l'aplicació
Download the "Smart Life" or "Tuya" app from your smartphone's app store (iOS or Android).
4.2 Connecting the Smart Pool Monitor and Gateway to the App
Nota: The solar water quality tester (YY-1099L) must be paired with the Zigbee Gateway (G06-W) to function. The gateway is included in your package.
- Connect the power to the Zigbee Gateway.
- Press and hold the "RESET" button on the gateway for 5 seconds until the indicator light is on and flashing red.
- Open the 'Smart Life' or 'Tuya' app on your smartphone.
- Click "Add Device".
- Select "Gateway Control" and then "Multi-function Gateway (Zigbee)".
- Input your correct 2.4GHz Wi-Fi password.
- Confirm that the gateway's indicator light is blinking rapidly, then select "fast blinking" in the app.
- The app will search for devices. Once found, click "Finish".
- Now, add the Smart Pool Monitor (YY-1099L) as a sub-device. Click "Add Sub-device" in the app.
- On the Smart Pool Monitor, press and hold its button for 5 seconds to make its indicator light blink.
- Confirm the monitor's light is blinking fast in the app.
- The app will search for the monitor. Once connected, the connection is successful.
5. Funcionament
5.1 Monitorització remota
Once connected, the Smart Pool Monitor will continuously measure water quality parameters and send data to the Tuya/Smart Life app via the Zigbee Gateway. You can view all data in real-time from anywhere using your smartphone or tablet.
5.2 Compartició de dades
The Tuya/Smart Life app allows you to add family accounts for data sharing, enabling multiple users to monitor the pool's water quality.
5.3 Alertes i alertes
The app will display data in red and trigger an alarm message if any parameter exceeds the set range. This helps you know exactly when and how much chemicals to add.
6. Calibració
Regular calibration ensures the accuracy of your Smart Pool Monitor. Calibration solutions for pH and ORP are included in your package.
6.1 Calibració de pH
The first calibration point must be 7.00 pH. The order of calibration depends on the item you measure: Acidic 7.00-4.00pH, Alkaline 7.00-10.01pH. If you are not sure about the acidity and alkalinity of the item, you can calibrate three points: 7.00-4.00-10.01pH or 7.00-10.01-4.00pH.
- Open the protective cover of the probe. Rinse the probe with purified water.
- Put the meter into the 7.00 pH solution. Shake gently and wait until the reading is stable.
- Press "CAL" on the Tuya Smart App.
- Complete pH Calibration.
6.2 ORP/CL Calibration
- Pour the 222mV calibration solution into a cup with a large opening.
- Put the ORP probe into the 222mV calibration solution.
- Press "CAL" on the Tuya Smart App.
- Press "-" or "+" on the Tuya Smart App until the value is "222".
- Complete ORP Calibration.
7. Manteniment
7.1 Càrrega
The device supports both solar and USB charging. The solar panel helps replenish power during use, extending battery life. For initial charging or when the battery is completely depleted, USB charging is recommended for faster and more reliable power-up.
7.2 Atenció general
- Keep the probe clean by rinsing with purified water after each calibration or when readings appear inconsistent.
- Guardeu el monitor en un lloc fresc i sec quan no l'utilitzeu.
- Ensure the protective cover is on the probe when storing.
8. Solució De Problemes
8.1 Problemes comuns i solucions
- Q: Why is the residual chlorine (CL) value always showing "0.0 mg/L"?
- A: For the residual chlorine value to be displayed normally, the pool pH value should be within 6.5-8.0 and the ORP value should be within 487-840mV. If either of these values is outside its recommended range, the chlorine reading may not display correctly.
- P: Per què no em puc connectar a la Wi-Fi?
- A: Ensure both the Zigbee Gateway and your mobile phone are connected to the same 2.4GHz Wi-Fi network. The device does not support 5GHz Wi-Fi.
- Q: The solar charging shows an abnormal power level or takes too long to charge.
- A: Solar charging is primarily for maintaining power during use. If the product has no power, it is recommended to use USB charging for a full charge. Solar charging alone will take a long time to fully charge a depleted battery.
9. Especificacions
| Paràmetre | Interval | Resolució | Precisió |
|---|---|---|---|
| Model | YY-1099L | ||
| Paràmetres de mesura | PH, CL, ORP, Salt, EC, TDS, Temperature | ||
| PH | 0.0–14.0 | 0.1 pH | ± 0.1 pH |
| CL (Chlorine) | 0.0–4.0 mg/L | 0.1 mg/L | ±0.1mg/L |
| ORP | -999–999mV | 1mV | ± 1 mV |
| Sal | 0–999ppm, 1000–9990ppm | 1 ppm | ±2% FS |
| EC (Electrical Conductivity) | 0–2000μS/cm; 2000–9990μS/cm; 10.01–19.99mS/cm | 1μS/cm, 10μS/cm, 0.01mS/cm | ±2% FS |
| TDS (sòlids dissolts totals) | 0–999ppm; 1000–9990ppm | 1 ppm | ±2% FS |
| Temperatura | 0.0–50.0 °C / 32.0–122.0 °F | 0.1°C/°F | ±0.5 °C |
| Connectivitat | Zigbee Gateway + 2.4GHz WiFi | ||
| Font d'alimentació | Solar + USB Rechargeable | ||
| Mida del producte | 210 × 165 × 165 mm | ||
| Pes del producte | 390 g | ||
| Certificació | CE | ||
10. Consells d'usuari
- Càrrega òptima: For initial setup or when the battery is low, prioritize USB charging over solar charging to ensure a quick and stable power-up. Solar charging is best for maintaining power during continuous use.
- Protecció de la sonda: While the device is waterproof, it's recommended to avoid fully immersing the entire product, especially the solar charging panel, for extended periods. Ensure the monitor floats correctly.
- Calibració regular: Calibrate the pH and ORP sensors every 2-4 weeks using the provided buffer solutions to maintain measurement accuracy.
- Chlorine Readings: If you observe a '0.0 mg/L' chlorine reading, first check that your pool's pH is between 6.5-8.0 and ORP is between 487-840mV, as these parameters directly influence chlorine detection.
- Integració de la llar intel·ligent: The device is designed to work with the Tuya/Smart Life app via its dedicated Zigbee Gateway. Compatibility with third-party Zigbee platforms like ZigBee2Mqtt is not officially supported or guaranteed by the manufacturer.
11. Preguntes freqüents (FAQ)
- Q1: Why is the chlorine value always showing "0.0 mg/L"?
- A1: Ensure the pool pH value is within 6.5-8.0 and the ORP value is within 487-840mV. If these conditions are met, the residual chlorine value should display normally. If any of these two values is out of range, the chlorine reading may not be displayed correctly.
- Q2: Does the device support multi-user access?
- A2: Yes, multiple users can access the device and view data in real-time via the Tuya/Smart Life app by adding family accounts.
- Q3: How often should I calibrate the device?
- A3: For best results and accurate readings, it is recommended to calibrate the device every 2–4 weeks using the included calibration solutions.
- Q4: Can the monitor work with saltwater pools?
- A4: Yes, the device is specifically designed for both saltwater and chlorine pools and accurately measures salinity (Salt in ppm).
- Q5: Is the device waterproof and floatable?
- A5: Yes, it features a floating waterproof design with an IP68 rating, making it ideal for all pool environments.
- Q6: Does it work with ZigBee2Mqtt?
- A6: The device is designed to work with the Tuya/Smart Life app via its dedicated Zigbee Gateway. Compatibility with third-party Zigbee platforms like ZigBee2Mqtt is not officially supported or guaranteed by the manufacturer.
12. Suport i contacte
For any questions regarding the product, including setup, operation, or technical assistance, please contact yieryi customer support. They can provide instructional videos for electrode cover removal, app connection, and pH/ORP calibration, and have professional technical engineers available to answer your queries.
For more information about yieryi and their products, visit their official channels or contact your retailer.
