Introducció
Gràcies per la compraasing the Olight Baldr Pro R Flashlight. This manual provides detailed instructions for the safe and effective use, maintenance, and troubleshooting of your device. Please read this manual thoroughly before use and retain it for future reference.
Contingut del paquet
Si us plau, comproveu el contingut del paquet en obrir-lo:
- Olight Baldr Pro R Flashlight
- USB Magnetic Charging Cable (MCC 1A)
- GL Rail Adapter (pre-installed)
- 1913 Rail Adapter
- Clau hexadecimal
- Cargols de muntatge
- Manual d'instruccions
Especificacions
| Característica | Detall |
|---|---|
| Sortida màxima | 1350 lúmens |
| Max Throw | 200 metres |
| Temps d'execució màxim | 93 minuts |
| Classificació impermeable | IPX4 |
| Bateria | Built-in 1000mAh Lithium-Polymer Battery |
| Carregant | USB Magnetic Charging (MCC 1A) |
| Material del cos | Aliatge d'alumini |
| Làser | Integrated GL beam (<5mW) |
| Certificació | CE |
Configuració i instal·lació
Rail Adapter Selection
The Baldr Pro R comes with a GL Rail Adapter pre-installed. If your firearm uses a Picatinny (1913) rail, you will need to replace the GL adapter with the included 1913 Rail Adapter.
Choose the correct rail adapter for your firearm (GL or 1913). Muntatge de la llanterna
The Baldr Pro R features a quick install system with a locking swing arm for easy attachment and detachment.
- Ensure the installation space on your rail is no less than 1.771 inches (45mm).
- Align the flashlight with the rail and secure it using the locking swing arm.
- Use the provided hex key and screws to tighten the mount if necessary for a secure fit.
Minimum installation space required on the rail. 
The quick install system allows for easy attachment and detachment. Optional Remote Pressure Switch
For long setups, an optional magnetic remote pressure switch can be used. This accessory allows for flexible activation without needing to reach the rear switches.
The optional remote pressure switch provides an alternative activation method for extended setups.
Instruccions de funcionament
Carregant la bateria
The Baldr Pro R features a built-in rechargeable battery and uses a USB Magnetic Charging Cable (MCC 1A). To charge:
- Connect the USB end of the MCC 1A cable to a power source (e.g., USB wall adapter, computer USB port).
- Attach the magnetic end of the cable to the charging port at the bottom of the flashlight. The magnetic connection will snap into place.
- The indicator light on the MCC 1A cable will show charging status.
- There is no need to remove the battery for charging.
Connect the magnetic charging cable to the flashlight's charging port. 
Magnetic charging allows for convenient and quick power replenishment. Selecció del mode
The Baldr Pro R features a mode selector ring on the head of the flashlight. Twist this ring to select between different output modes:
- White Light Only: Activates only the flashlight beam.
- GL Beam Only: Activates only the green laser.
- White Light & GL Beam Combo: Activates both the flashlight and the green laser simultaneously.
Twist the mode selector ring to switch between white light, GL beam, or both. Activation and Strobe
The Baldr Pro R is equipped with ambidextrous rear switches for easy operation:
- Activació momentània: Press and hold either rear switch. Release to turn off.
- Constantment activat: Quickly press and release either rear switch. Press again to turn off.
- Mode estroboscòpic: Quickly push both rear switches simultaneously to activate strobe. Press either switch again to turn off.
The dual rear switches provide versatile activation options.
Manteniment
- Neteja: Regularly clean the lens and body of the flashlight with a soft, clean cloth. For stubborn dirt, a slightly damp es pot utilitzar tela.
- Port de càrrega: Keep the magnetic charging port clean and free of debris to ensure proper charging.
- Emmagatzematge: Store the flashlight in a cool, dry place when not in use. Avoid extreme temperatures.
- Resistència a l'aigua: The Baldr Pro R is IPX4 waterproof. While it can withstand splashes, avoid submerging it in water.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llanterna no s'encén | Low battery; loose connection; switch malfunction. | Charge the battery fully. Ensure the flashlight is securely mounted. Check if switches are obstructed. |
| El làser no funciona | Incorrect mode selected; low battery. | Ensure the mode selector ring is set to GL Beam Only or White Light & GL Beam Combo. Charge the battery. |
| La càrrega no funciona | Dirty charging port; faulty cable/power source. | Clean the magnetic charging port. Try a different USB power source or charging cable. |
| La sortida de llum és tènue | Bateria baixa. | Carregueu la bateria completament. |
Consells per a l'usuari
- The magnetic charging cable is very convenient; ensure it's always with your flashlight for easy recharging.
- The light is bright and the laser is prominent, making it effective for aiming day or night.
- The quick-install system makes it easy to move the light between different firearms or remove it for storage.
Garantia i Suport
Olight products are manufactured with high-quality materials and craftsmanship. For warranty claims or technical support, please refer to the official Olight weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el comprovant de compra per validar la garantia.
The Baldr Pro R is designed to withstand high recoil and impact, ensuring reliability in demanding conditions.
