Weefine WF107 Smart Focus 4000 V2 Multifunctional Video Light

1. Introducció

The Weefine Smart Focus 4000 V2 is a versatile, compact underwater video light designed for scuba diving photography and videography. Measuring only 138mm in length, this device integrates a powerful 4000 lumen COB LED light source with advanced features such as full-spectrum color rendering and an LED flash function. It is engineered to enhance underwater imaging by providing natural and optimized lighting, adapting to various shooting scenarios from continuous video to synchronized flash photography.

2. Què hi ha a la caixa

Carefully unpack your Weefine Smart Focus 4000 V2 and ensure all components are present:

• Weefine Smart Focus 4000 V2 Video Light
• Maleta de transport
• Carregador
• Lithium-ion Battery (WBL-31N, 11.1V 3400mAh)
• YS Mount (interchangeable)
• 1-inch Ball Mount (interchangeable)
• Replacement O-rings (x2)
• Greix amb junta tòrica
• O-ring Remover (O-rings picker)
• Clau hexagonal
• Manual d'usuari i targeta de garantia
• Certificat d'inspecció
• Protective O-rings (x3, against bumps)

3. Configuració

3.1 Instal·lació i càrrega de la bateria

1. Unscrew the rear cap of the light to access the battery compartment.
2. Insert the WBL-31N Lithium-ion battery, ensuring correct polarity.
3. Securely screw the rear cap back on.
4. To charge, connect the provided charger to the light and a power outlet. The battery indicator will show charging status.
5. Important: Always remove the battery before transportation to prevent accidental activation or damage.

3.2 Muntatge de la llum

The Smart Focus 4000 V2 comes with interchangeable YS and 1-inch ball mounts for flexible attachment to your underwater camera system.

1. Choose the appropriate mount (YS or Ball) for your setup.
2. Attach the chosen mount to the light using the provided hexagon wrench.
3. Secure the light to your camera tray or arm system.

3.3 O-ring Preparation

Before each dive, inspect the O-rings for any dirt, hair, or damage. Clean them thoroughly and apply a thin, even layer of the provided O-ring grease. This ensures a watertight seal.

4. Instruccions de funcionament

4.1 Engegada/Apagada i Selecció de Mode

The light features dual button operation for ease of use.

• Encès: Press and hold one of the buttons until the light turns on.
• Ciclisme en mode: Short press a button to cycle through different operating modes (Video Light, Full Spectrum, Red, Blue, Green, Strobe, Auto Color Changing).
• Ajust de brillantor: In video modes, use the buttons to adjust power levels (100%, 75%, 50%, 25%).
• Apagar: Press and hold a button until the light turns off.

4.2 Indicador de nivell de bateria

The tri-color indicator provides a quick visual of the remaining battery life:

• Blau: > 80% de bateria restant
• Verd: > 30% de bateria restant
• Vermell: > 10% de bateria restant
• Vermell intermitent: Approximately 10 minutes of working time left.

4.3 Modes de funcionament

• Video Light Mode: Provides a powerful 4000 lumen beam with a 110° angle and 5000K color temperature for general underwater videography.
• Full Spectrum Color Rendering Mode: Utilizes the COB white light combined with precisely controlled colored light to optimize the color spectrum for enhanced CRI (≥RA95) underwater.
• LED Flash Function (Strobe Mode): The light can function as an underwater strobe, producing a 5000-lumen flash. It synchronizes with your camera's built-in flash via a fiber optic cable. This mode is fast enough to synchronize with cameras that use a pre-flash. A lower-power setting light can be used before the flash fires to compose the shot.
• Focusing Light: Can be used as a dedicated focusing light. The 'FOCUS OFF' function triggers synchronously to remove traces of colored focus lights from photos.
• Auto Color Changing Mode / Artistic Background Light: Offers over 600 kinds of colored lights, creating rich background halo rendering effects for creative shots.

5. Manteniment

5.1 Cures posteriors a la immersió

• After each dive, thoroughly rinse the light with fresh water to remove salt, sand, and other debris.
• Operate the buttons several times while rinsing to flush out any trapped salt.
• Dry the light completely with a soft cloth before storage.

5.2 O-ring Maintenance

• Regularly inspect the O-rings for any signs of wear, cracks, or damage.
• Clean the O-ring grooves and O-rings with a lint-free cloth.
• Apply a thin, even layer of silicone grease to the O-rings to maintain their elasticity and sealing properties.
• Replace O-rings if any damage is observed. Use the provided O-ring remover for safe removal.

5.3 Emmagatzematge

• Store the light in its carrying case in a cool, dry place away from direct sunlight.
• Always remove the battery from the light before long-term storage or transportation.

6. Solució De Problemes

• La llum no s'encén: Ensure the battery is fully charged and correctly installed. Check for any debris preventing proper contact.
• Fuga d'aigua: Immediately remove the battery. Inspect O-rings for damage, dirt, or improper seating. Clean and re-grease O-rings, then reassemble carefully.
• Flash synchronization issues: Verify the fiber optic cable is securely connected to both the light and your camera housing. Check camera settings for external flash/strobe compatibility.
• Reduced burn time: Ensure the battery is fully charged. Battery performance can degrade over time; consider replacing older batteries.

7. Especificacions

8. Consells d'usuari

• Comprovació prèvia a la immersió: Always perform a thorough pre-dive check, including O-ring inspection and ensuring the light is securely mounted and sealed, before entering the water.
• Gestió de la bateria: Fully charge your battery before each dive trip. Consider carrying a spare charged battery for extended shooting sessions.
• Flash Practice: If using the flash function, practice synchronization with your camera above water to familiarize yourself with the settings and timing.
• Il·luminació òptima: Experiment with different light modes and power levels to find the best illumination for your subject and environment. The auto color changing mode can add artistic flair to your background.

9. Garantia i Suport

Your Weefine Smart Focus 4000 V2 comes with a warranty. Please refer to the included Warranty Card for details on coverage and duration. For technical support, service, or warranty claims, please contact the authorized Weefine dealer or the seller from whom you purchased the product. Keep your proof of purchase and the inspection certificate for any warranty-related inquiries.