1. Introducció
The IPower Plus series is a new line of pure sine wave inverters designed for compatibility with lithium battery systems. These inverters feature advanced input surge current suppression technology, which effectively protects lithium battery cells and their Battery Management Systems (BMS) from surge current damage. Utilizing a smart voltage and current double closed-loop control algorithm, the inverter offers faster response times and enhanced resistance to load impacts. The internal design incorporates high-quality, high-power-density components to ensure stable, reliable, and sufficient power output for extended use. Optional communication solutions allow users to monitor operational status in real-time and configure parameters remotely.
This equipment is suitable for various applications requiring DC to AC conversion, including solar AC power systems, vehicle systems, RV power supplies, security monitoring systems, emergency lighting systems, field power systems, and household power systems. With its EMC (Electro Magnetic Compatibility) characteristics, the inverter is also ideal for environments demanding higher power quality.
2. Característiques
- Completely isolated input and output design.
- Smart voltage and current double closed-loop control for faster response and improved reliability.
- EMC characteristics suitable for high-quality power systems.
- Advanced SPWM technology and pure sine wave output.
- Input surge current suppression technology, supporting lithium battery systems.
- High resistance to impact loads (e.g., air conditioners, washing machines, refrigerators).
- High power density and high-quality components for reliability.
- Output power factor up to 1.
- Low no-load and standby loss.
- Low THD (Total Harmonic Distortion).
- Alta eficiència de conversió.
- Extensive protection features: input reverse polarity, input overvoltage, entrada baixa voltage, output overload, short circuit, and overheating.
- Air cooling controlled by dual conditions (temperature and load).
- 180-degree rotatable LCD design for simplified system wiring.
- One-click control of operational status.
- User-friendly LCD design for easy monitoring and parameter configuration.
- Supports phone Apps and PC software for remote control.
- Volum de sortidatage 220/230VAC and frequency 50/60Hz optional.
- USB ports (5VDC/Max.1A) for powering DC fans and charging electronic equipment.
- External switch contact design for remote control.
- IEC62109, EN61000, RoHS approved.
- Parameters can be monitored via inverter LCD, remote LCD, phone Apps, and PC software.
- Note: USB function is unavailable for 48V input inverters.
3. Producte acabatview
3.1 Components de l'inversor
Pantalla LCD i botons 3.2
| No. | Component | Function/Indicator |
|---|---|---|
| 1 | LCD | Displays system information and parameters. |
| 2 | Botó UP/Configuració | Navigates up or enters settings. |
| 3 | Indicador d'error (vermell) | Indica errors del sistema. |
| 4 | Indicador d'estat de treball (blau) | Indicates operational status (solid blue for ON, slow flashing for 1/4Hz, fast flashing for 1Hz, OFF for no power). |
| 5 | DOWN/Enter button | Navigates down or confirms selection. |
| 6 | Output ON/OFF button | Controls the inverter's AC output. |
| 6 | Screws of the LCD | Secures the LCD panel. |
4. Instruccions de configuració
Before installation, ensure the inverter is placed in a well-ventilated area, away from direct sunlight, high temperatures, and moisture. Always disconnect power sources before making any connections.
4.1 Diagrama general de connexió
- Connexió de la bateria: Connect the battery to the DC INPUT terminals on the inverter. Ensure correct polarity: red cable to the positive (+) terminal and black cable to the negative (-) terminal.
- Connexió de sortida de CA: Connect your domestic appliances to the AC OUTPUT terminals of the inverter.
- Verifica les connexions: Comproveu dues vegades que totes les connexions estiguin ben ajustades i que la polaritat sigui correcta abans de continuar.
4.2 Detailed Connection Diagrams by Model
Refer to the specific diagram for your inverter model to ensure correct wiring of all ports.
5. Instruccions de funcionament
5.1 Engegada/apagada
- After all connections are securely made, press the Output ON/OFF button (No. 6 in Figure 3.5) to turn on the inverter.
- The blue Working Status Indicator (No. 4 in Figure 3.5) will illuminate, and the LCD will display operational data.
- To power off, press the Output ON/OFF button again.
5.2 Navegació per pantalla LCD
The LCD provides real-time monitoring of various parameters. Use the UP/Setting (No. 2) and DOWN/Enter (No. 5) buttons to navigate through the display interfaces.
The display typically cycles through the following information:
- Bateria voltage
- Volum de sortidatage
- Corrent de sortida
- Potència de sortida
- Freqüència de sortida
5.3 Rotating the LCD Display
The LCD display can be rotated 180 degrees to simplify system wiring and viewing, especially when the inverter is mounted in different orientations.
6. Manteniment
- Neteja regular: Mantingueu l'exterior de l'inversor net i lliure de pols. Assegureu-vos que les obertures de ventilació no estiguin obstruïdes.
- Comprovacions de connexió: Periodically inspect all electrical connections (battery, AC output) to ensure they are tight and free from corrosion.
- Condicions ambientals: Ensure the inverter operates within its specified temperature and humidity ranges. Avoid exposure to water or excessive moisture.
- Salut de la bateria: Monitor your battery's health and charge level, as a healthy battery is crucial for inverter performance.
7. Solució De Problemes
- Sense potència de sortida: Comproveu les connexions de la bateria, el volum de la bateriatage, and ensure the inverter is turned on. Verify that the load does not exceed the inverter's capacity.
- Indicador d'error encès: Refer to the inverter's specific fault codes (if available in the full manual) or disconnect all loads and restart the inverter. If the fault persists, contact support.
- Protecció de sobrecàrrega: If the inverter shuts down due to overload, reduce the connected load and restart the inverter.
- Sobreescalfament: Ensure adequate ventilation around the inverter. Clear any obstructions from the cooling fans.
8. Especificacions
| Paràmetre | IP1000-Plus Series | IP1500-Plus Series | IP2000-Plus Series | IP3000-Plus Series | IP4000-Plus Series |
|---|---|---|---|---|---|
| Potència de sortida contínua | 1000 W @ 35 ℃ | 1500 W @ 35 ℃ | 2000 W @ 35 ℃ | 3000 W @ 35 ℃ | 4000 W @ 35 ℃ |
| Potència de sobretensió | 2000W@5S | 3000W@5S | 4000W@5S | 6000W@5S | 8000W@5S |
| Surge Current (Power On) | <100A | <100A | <100A (1x/2x), <50A (4x) | <100A (1x/2x), <65A (4x) | <65A |
| Vol. De sortidatage | 110VAC(±3%); 120VAC(-7%~+3%) or 220VAC(±3%); 230VAC(-7%~+3%) | 220VAC(±3%); 230VAC(-7%~+3%) | |||
| Freqüència de sortida | 50/60Hz±0.2% | ||||
| Onada de sortida | Onda senyal pura | ||||
| Output Distortion THD | ≤4% (Resistive load) | ≤4% (Resistive load) | ≤3% (Resistive load) | ≤3% (Resistive load) | ≤3% (Resistive load) |
| Factor de potència de càrrega | 0.2~1 (Load power ≤ Continuous output power) | ||||
| Volum d’entrada nominaltage | 12V/24VDC | 12V/24V/48VDC | 12V/24V/48VDC | 12V/24V/48VDC | 48VDC |
| Entrada Voltage Rang | 10.8~16.0VDC / 21.6~32.0VDC | 10.8~16.0VDC / 21.6~32.0VDC / 43.2~64.0VDC | 10.8~16.0VDC / 21.6~32.0VDC / 43.2~64.0VDC | 10.8~16.0VDC / 21.6~32.0VDC / 43.2~64.0VDC | 43.2~64.0VDC |
| Rated Output Efficiency | >87% (11-Plus), >89% (12-Plus) | >88% (11-Plus), >89% (12-Plus) | >85% (11-Plus), >91% (12-Plus) | >87% (11-Plus), >90% (12-Plus) | >91% |
| Max. Output Efficiency (30% loads) | >92% (11-Plus), >93% (12-Plus) | >93% (11-Plus), >93% (12-Plus) | >92% (11-Plus), >93% (12-Plus) | >94% (11-Plus), >94% (12-Plus) | >94% |
| Corrent inactiu | <0.2A | <0.2A | <0.2A | <0.2A | <0.6A |
| Corrent sense càrrega | <0.8A (11-Plus), <1.1A (12-Plus) | <1.0A (11-Plus), <1.2A (12-Plus) | <0.9A (11-Plus), <1.0A (12-Plus) | <1.6A (11-Plus), <1.0A (12-Plus) | <0.6A |
| Sortida USB | 5VDC/Max.1A (Unavailable for 48V input inverters) | ||||
| RS485 Com. Port | 5VDC / 200mA | ||||
| Terminal d’entrada | M6 (IP1000/1500/2000), M10 (IP3000) | ||||
| Dimensió (L×W×H) | 371×231.5×123 mm | 387×231.5×123 mm | 421×231.5×123 mm | 550×274×148mm (11-Plus), 521×274×148mm (12-Plus) | 516×231.5×123 mm |
| Dimensió de muntatge | 345×145 mm | 361×145 mm | 395×145 mm | 525×145mm (11-Plus), 495×145mm (12-Plus) | 490×145 mm |
| Mida del forat de muntatge | Φ6 mm | ||||
| Pes net | 5.8 kg | 6 kg | 6.5 kg | 13kg (11-Plus), 8kg (12-Plus) | 8 kg |
| Interval de temperatura de funcionament | -20℃~+60℃ (Refer to the derating curve) | ||||
| Humitat relativa | < 95% (NC) | ||||
| Tancament | IP20 | ||||
9. Consells d'usuari
- La ventilació és clau: Always ensure your inverter has ample space for airflow. Proper ventilation prevents overheating and prolongs the life of the unit.
- Match Load to Inverter: Do not exceed the continuous output power of your inverter. For appliances with high startup surges (like refrigerators or pumps), ensure the inverter's surge power capacity can handle it.
- Compatibilitat de la bateria: Confirm your battery type (e.g., Lead-acid, Lithium) and voltage (12V, 24V, 48V) are compatible with your specific inverter model.
- Mida del cable: Use appropriately sized cables for battery connections to minimize voltage drop and ensure efficient power transfer.
- Monitorització remota: Utilize the available phone Apps or PC software for remote monitoring and parameter configuration, especially for systems in hard-to-reach locations.
10. Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the official Epever weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
