Introducció
The Yaesu FTM-150E ASP is a full-featured mobile dual-band transceiver designed for 144/430MHz FM operation, offering 55W VHF and 50W UHF output. It incorporates advanced features like Super-DX RF Front-End Design, Audio Signal Processor (ASP), and a dual speaker system for high-fidelity audio. This manual provides essential information for the proper setup, operation, and maintenance of your FTM-150E ASP transceiver.
Característiques clau
- Bandes de freqüència: Air Band (108-137MHz), 144MHz/VHF Band (137-174MHz), VHF/UHF Band (174-400MHz), 430MHz/UHF Band (400-550MHz).
- Sortida d'alta potència: 55W VHF / 50W UHF.
- Dual Speaker System: Front speaker and main body speaker combine for 6W total audio output (3W main body, 3W control head) for clear, loud audio.
- Super-DX + Audio Signal Processor (ASP): Enhances reception of weak signals.
- Primary Memory Group (PMG): Register and monitor up to 5 frequencies.
- Memory Auto Grouping (MAG): Automatic memory organization.
- Dual Receive and Scope Operation.
- Customized Function List (CFL): Register up to 9 functions for quick access.
- Wide-band Reception.
- Angle Variable Swing-Head: Ensures excellent display visibility.
- True Dual Band Operation: V+V/U+U/V+U/U+V with independent knobs and LED indicators.
- High-resolution Graphical Dot-matrix Display.
- Control-Head with Microphone Jack: Allows for flexible installation.
- Gran capacitat de memòria: 1103 memory channels.
- Memory Data Transfer: Transfer memory data to the VFO Register.
- Funnel Air-Convection Conductor (FACC) Cooling System: Ensures stable high-power output.
- Ranura per a targeta MicroSD: For memory backup and data cloning (up to 32GB).
- Split Memory Function.
- Funció de salt de banda VFO: Hide unused bands.
- Built-in CTCSS, DCS, and Pager (EPCS): For selective call features.
- VOX (Voice Activated Transmit) Operation.
- Illuminated Keyboard: For operation in low-light conditions.
- Selectable Backlight Color: Amber and white.
- Sub-Band Off Function: Displays frequency in large numbers.
- ARS (Automatic Repeater Shift).
- APO (Automatic Power Off).
- TOT (Time-out Timer).
- DTMF Encode and Memory.
- Alerta meteorològica de la NOAA: When available in service area.
Guia de configuració
1. Desembalatge i inspecció
Desembaleu amb cura tots els components i verifiqueu-los amb la llista del contingut del paquet:
- FTM-150 Radio Body
- SSM-85D DTMF Microphone
- Suport de muntatge
- Cable d'alimentació DC
- Conjunt de cargols
- Clip de micròfon
- 2 × Spare Fuse 15A
- Manual d'usuari
2. Mounting the Transceiver
The FTM-150E ASP is designed for mobile installation. Use the provided mounting bracket to secure the main unit in a stable location within your vehicle. Ensure adequate ventilation around the unit, especially for the cooling fan located at the rear.
3. Front Panel Separation
The control head of the FTM-150E ASP can be separated from the main unit for flexible installation. To separate, press the unlock button on the side of the control head.
4. Connexions
Refer to the diagrams for proper connection points:
- Potència CC: Connect the supplied DC power cable to the 13.8V DC input on the rear of the main unit. Ensure correct polarity.
- Antena: Connect a suitable dual-band antenna to the ANT jack.
- Micròfon: Connect the SSM-85D DTMF Microphone to the MIC jack on the control head.
- Altaveu extern (opcional): An external speaker can be connected to the EXT SP socket for enhanced audio.
- Data Jack: For data communication or programming.
- Socket de control: For connecting the separated control head to the main unit.
Instruccions de funcionament
1. Controls bàsics
- Encès/apagat: Press the power key (11) to turn the transceiver on or off.
- VOL/SQL Knob (1): Adjusts the audio volume and squelch level.
- DIAL Knob (2): Used for frequency tuning, memory channel selection, and menu navigation.
- LED Display Screen (5): Shows current frequency, operating mode, and other status indicators.
- BAND Key (7): Canvia entre bandes de freqüència.
- V/M Key (9): Toggles between VFO (Variable Frequency Oscillator) and Memory modes.
2. Frequency Selection (VFO Mode)
In VFO mode, you can manually tune to desired frequencies:
- Premeu el botó V/M key to enter VFO mode.
- Gira el MARCA botó per canviar la freqüència.
- Utilitza el BANDA key to switch between VHF and UHF bands, or other available receive bands like the Air Band.
3. Adjusting Static Dryness Level
The static dryness level (squelch) can be adjusted to filter out noise. Rotate the VOL/SQL knob to find the optimal setting where background noise is suppressed but weak signals can still be heard.
4. Funcions de memòria
- Primary Memory Group (PMG): This feature allows you to register up to 5 frequently used frequencies for quick recall and monitoring. Consult the full user manual for detailed programming steps.
- Memory Auto Grouping (MAG): Automatically organizes memory channels.
- Canals de memòria: The transceiver has 1103 memory channels. To store a frequency, tune to the desired frequency in VFO mode, then follow the memory store procedure outlined in the detailed manual.
5. Funcions avançades
- DTMF Encode/Memory: Use the DTMF keyboard on the microphone to send DTMF tones or store DTMF sequences.
- Operació VOX: Enable Voice Activated Transmit for hands-free operation. Adjust VOX sensitivity as needed.
- Alerta meteorològica de la NOAA: The transceiver can receive NOAA Weather Alerts in areas where this service is available.
- Targeta MicroSD: Insert a microSD card (up to 32GB) into the slot on the main unit for backing up memory data and cloning radio data to other compatible radios.
Manteniment
- Neteja: Use a soft, dry cloth to clean the transceiver's exterior. Do not use abrasive cleaners or solvents.
- Ventilació: Ensure the cooling fan and ventilation slots are free from dust and obstructions to prevent overheating.
- Targeta MicroSD: Regularly back up your memory data to the microSD card. Format the card periodically if issues arise.
- Substitució de fusibles: If the transceiver does not power on, check the inline fuse on the DC power cable. Replace with a spare 15A fuse if blown.
Resolució de problemes
- Sense energia: Check DC power cable connections, ensure correct voltage (13.8V DC), and inspect the 15A fuse.
- Sense àudio: Verify volume level, squelch setting, and microphone connection. Check if an external speaker is properly connected if in use.
- No es pot transmetre: Ensure the antenna is properly connected. Check power output settings.
- Mala recepció: Check antenna connection and location. Adjust squelch level. Ensure you are within range of the transmitting station.
- Problemes de visualització: If the display is blank or erratic, try cycling the power. If issues persist, consult the full service manual or contact support.
Especificacions
| Categoria | Especificació |
|---|---|
| General | |
| Interval de freqüència | RX: 108-137MHz (Air Band), 137-174MHz (144MHz HAM/VHF Band), 174-400MHz, 400-550MHz (430MHz HAM/UHF Band) TX: 144-148MHz or 144-146MHz, 430-450 or 430-440MHz (Depends on transceiver version) |
| Passos del canal | 5, 6.25, (8.33), 10, 12.5, 15, 20, 25, 50, 100kHz |
| Estabilitat de freqüència | ±2.5ppm -4°F to +140°F (-20°C to +60°C) |
| Tipus d'emissió | F2D, F3E |
| Subministrament Voltage | Nominal 13.8V DC, Negative Ground |
| Consum actual | 0.5A (Receive) 11A (55W TX, 144MHz) 10A (50W TX, 430MHz) |
| Temperatura de funcionament | -4 °F a +140 °F (-20 °C a +60 °C) |
| Mida de la caixa | Radio Unit: 139(W)*42(H)*133(D) mm (w/o fan) Controller: 148(W)*56(H)*56(D) mm (w/o knob) |
| Pes (aprox.) | 2.64lbs (1.2kg) transceiver unit with control-head |
| Emissor | |
| Potència de sortida RF | 55W (144MHz), 50W (430MHz) / 25W / 5W |
| Tipus de modulació | F2D, F3E: Variable Reactance modulation |
| Desviació màxima | ±5KHz |
| Emissions espúries | At least 60dB below |
| Impedància del micròfon | 2 K ohm |
| Data Jack Impedance | 10k ohm |
| Receptor | |
| Tipus de circuit | Superheterodí de doble conversió |
| Freqüències intermèdies | 1st: Main 56.75MHz SUB 55.85MHz 2nd: 450KHz |
| Sensibilitat | 0.8uV TYP for 10dB SN (108-137MHz, AM) 0.2uV for 12dB SINAD (137-140MHz, FM) 0.2uV for 12dB SINAD (140-150MHz, FM) 0.25uV TYP for 12dB SINAD (150-174MHz, FM) 0.3uV TYP for 12dB SINAD (174-222MHz, FM) 0.8uV TYP for 10dB SN (300-336MHz, AM) 0.25uV TYP for 12dB SINAD (336-420MHz, FM) 0.2uV for 12dB SINAD (420-470MHz, FM) 0.2uV TYP for 12dB SINAD (470-550MHz, FM) |
| Selectivitat | NFM, AM 12kHz/30kHz (-60dB/-60dB) |
| Sortida AF | 3W (8OHM, THD 10%, 13.8V) Front speaker 3W (8OHM, THD 10%, 13.8V) Internal speaker 3W (8OHM, THD 10%, 13.8V) External speaker |
| Impedància de sortida AF | 8 ohms |
| Strength of secondary radio waves | 4nW and below |
Specifications are subject to change without notice and are guaranteed within the amateur bands only. Frequency ranges and functions may vary according to transceiver version.
Consells per a l'usuari
- Micròfon inclòs: The SSM-85D DTMF Microphone is included in the package, ensuring you have the necessary accessory for communication right out of the box.
- MicroSD Card for Backup: Utilize the microSD card slot for backing up your radio's settings and memory channels. This is invaluable for restoring your configuration if needed or for cloning settings to another FTM-150 unit.
- Àudio òptim: For the best audio experience, consider using an external speaker, especially in noisy mobile environments, to take advantage of the 3W external speaker output.
Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the official Yaesu website or contact your authorized Yaesu dealer. Keep your purchase receipt as proof of purchase for warranty claims.
