Introducció
The Refoss Smart Wi-Fi Relay Switch R11 is a compact and versatile device designed to integrate smart control and energy monitoring into your existing electrical systems. It supports fully open API access, allowing for advanced custom integrations with platforms like Home Assistant, and provides real-time energy consumption tracking. Its retrofit-friendly design ensures easy installation behind standard wall switches.
Informació de seguretat
This device is designed with safety in mind, featuring built-in overvoltage, overcurrent, and overpower protection. It utilizes PC Flame Retardant Material and Pure Copper Terminals for secure operation. Always ensure proper installation by a qualified electrician if you are unsure about electrical wiring.
WARNING: Always disconnect power at the circuit breaker before installing or servicing the device.
Configuració i instal·lació
The Refoss R11 is designed to be compact and retrofit-friendly, fitting behind standard wall switches without altering existing wiring or aesthetics. A neutral wire is required for connection.
Contingut del paquet:
- Refoss Smart Wi-Fi Relay Switch R11 (1 PC or 2 PCS depending on variant)
- Manual d'usuari (aquest document)
Instal·lació física:
- Desconnexió d'alimentació: Before starting, turn off the power to the circuit at the main circuit breaker to prevent electrical shock.
- Identificar els cables: Locate the Live (L), Neutral (N), Load (O), and Switch (MS) wires in your existing wall switch box. The Refoss R11 requires a neutral wire (typically blue).
- Connecteu els cables:
- Connect the Live wire to the 'L' terminal on the R11.
- Connect the Neutral wire to the 'N' terminal on the R11.
- Connect the Load wire (to the appliance/light) to the 'O' terminal on the R11.
- Connect the physical wall switch wire to the 'MS' terminal on the R11.
- Dispositiu segur: Carefully place the R11 module behind your existing wall switch, ensuring it fits without obstruction. Its dimensions are approximately 43mm x 43mm x 19mm.
- Restaura l'alimentació: Once all connections are secure and the device is properly housed, restore power at the circuit breaker.
Initial Wi-Fi Setup:
After installation and power restoration, the device will enter pairing mode. Follow the instructions in the Refoss mobile application to connect the R11 to your Wi-Fi network and complete the setup process.
Instruccions de funcionament
Control bàsic:
- Interruptor físic: You can continue to use your existing wall switch to turn the connected appliance/light on or off.
- Aplicació mòbil: Use the Refoss mobile application to remotely control the switch, set schedules, and monitor energy consumption.
Monitorització energètica:
The R11 provides real-time energy consumption tracking. Through the Refoss app, you can view minute-level export data, cloud-based statistics, and integrate this data with third-party platforms like Home Assistant.
Advanced Integration (Open API):
For DIY enthusiasts and developers, the Refoss R11 offers fully open API access. It supports JSON-RPC 2.0 via HTTP, webhook, and MQTT, enabling advanced custom integrations and automation.
The Open API documentation can be found at: https://docs.refoss.net/open-api
Manteniment
The Refoss R11 Smart Wi-Fi Relay Switch requires minimal maintenance.
- Mantingueu el dispositiu sec i net.
- Wipe the exterior with a soft, dry cloth if necessary.
- No utilitzeu productes químics ni productes de neteja abrasius.
- Ensure the device is not exposed to extreme temperatures or humidity.
For optimal performance, ensure your Wi-Fi network is stable and the Refoss app is updated to the latest version.
Resolució de problemes
If you encounter issues with your Refoss R11, try the following steps:
- El dispositiu no respon:
- Check if the power to the switch is on at the circuit breaker.
- Verify that the device is properly wired according to the installation instructions.
- Assegureu-vos que la vostra xarxa Wi-Fi estigui activa i que el dispositiu estigui dins del seu abast.
- Try restarting the device by turning off and on the power at the circuit breaker.
- No es pot connectar a Wi-Fi:
- Assegureu-vos que la vostra xarxa Wi-Fi sigui de 2.4 GHz (la majoria de dispositius domèstics intel·ligents no admeten 5 GHz).
- Comproveu que la contrasenya de la Wi-Fi sigui correcta.
- Move the device closer to your Wi-Fi router during the initial setup.
- Perform a factory reset on the device (refer to the app or API documentation for specific reset procedures if not obvious).
- Les dades de monitorització d'energia són incorrectes o falten:
- Ensure the device is properly connected and online.
- Check the Refoss app for any error messages or updates.
- Verify that the load connected to the switch is within the specified limits (MAX 16A).
- Home Assistant or API integration issues:
- Refer to the official Refoss Open API documentation (https://docs.refoss.net/open-api) for detailed integration guides.
- Check your Home Assistant configuration for correct API keys or settings.
- Ensure network connectivity between your Home Assistant instance and the Refoss device.
Especificacions
| Atribut | Valor |
|---|---|
| Nom de marca | Refoss |
| Número de model | R11 |
| Font d'alimentació | CA 100-240V, CC 24-30V |
| Corrent màxim | 16A |
| Mètode de comunicació | Wi-Fi |
| Comunicació sense fils | Sí |
| Bateria inclosa | No |
| Adaptador de safata d'entrada | No |
| Dimensions (L x A x A) | 43 mm x 43 mm x 19 mm |
| Característiques de seguretat | Overvoltage, Overcurrent, Overpower Protection, PC Flame Retardant Material, Pure Copper Terminal |
| Característiques especials | Energy Monitoring, Fully Open API Access (JSON-RPC 2.0 via HTTP, webhook, MQTT), Home Assistant Integration |
| Origen | Xina continental |
| Pes del producte | Aprox. 0.12 kg (envasat) |
Consells per a l'usuari
No hi ha consells específics per a l'usuari de reviews or Q&A were provided. However, based on the product features:
- Per als usuaris avançats, exploreu el Open API documentation to unlock full customization and integration possibilities with your smart home ecosystem.
- Regularly check the Refoss app for firmware updates to ensure optimal performance and access to new features.
- Utilize the energy monitoring feature to identify power-hungry appliances and optimize your energy consumption.
Garantia i Suport
For technical support, troubleshooting assistance, or warranty inquiries, please contact Refoss Official Store directly through their official channels. The Open API documentation is available for developers at https://docs.refoss.net/open-api.
Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.





