1. Producte acabatview
The Xiaomi Mijia Robot Vacuum M40S OV31CN is an advanced robotic vacuum and mop designed for comprehensive home cleaning. It features intelligent lifting laser navigation, powerful 23000Pa suction, and a self-cleaning base with hot water mop washing and automatic dust collection. Its ultra-thin design allows it to clean under low furniture, while dual robotic arms ensure thorough edge and corner cleaning.
2. Guia de configuració
2.1 Desembalatge i col·locació
- Traieu amb cura tots els components de l'embalatge.
- Place the self-cleaning base in an open area with good Wi-Fi signal, preferably against a wall, ensuring sufficient space around it for the robot to dock.
- If using the embedded base, ensure proper installation according to the provided dimensions (420mm width, 280mm height, 450mm depth).
Connexió a l'aplicació Home de 2.2 Mi
The Xiaomi Mijia Robot Vacuum M40S is controlled via the Mi Home app. Follow these steps for initial setup:
- Baixeu l'aplicació Mi Home des de la botiga d'aplicacions del vostre dispositiu.
- Open the Mi Home app and change the region setting to "China Mainland".
- Set your desired language within the app.
- Assegureu-vos que el Bluetooth estigui habilitat al vostre dispositiu mòbil.
- In the Mi Home app, select "Add device" and allow it to scan for nearby devices.
- If the device is not automatically detected, select "Add device manually" and search for "Mijia Robot Vacuum M40S" or "OV31CN".
- Follow the on-screen prompts to connect the robot vacuum to your Wi-Fi network.
3. Instruccions de funcionament
3.1 Inici d'un cicle de neteja
- Inici manual: Press the power button on the robot or the base to initiate a cleaning cycle.
- Control de l'aplicació: Open the Mi Home app. From the device interface, you can start, pause, or stop cleaning.
3.2 Intelligent Navigation and Cleaning
- Lifting Laser Navigation: The robot uses advanced laser navigation to map your home and plan efficient cleaning paths. Its body can lift or lower to navigate under low furniture (as thin as 8.8cm).
- Edge and Corner Cleaning: Equipped with retractable dual robotic arms, the robot can sweep and mop precisely along walls and into corners, ensuring thorough coverage.
- Evitació d'obstacles: Multiple obstacle avoidance sensors and triple laser real-time scanning help the robot detect and navigate around obstacles, preventing it from getting stuck or bumping into furniture.
3.3 Suction and Mopping
- Succió potent: The robot delivers 23000Pa suction power to effectively pick up dust, hair, and debris from various floor types.
- Funció de fregar: The integrated mopping system, combined with the self-cleaning base, ensures floors are thoroughly cleaned. The main unit has an independent water tank for precise water volume control.
4. Manteniment
4.1 Manteniment de la base autolimpiant
- Rentat i assecat amb mopa: The base automatically washes the mop with 80°C hot water to dissolve stubborn stains and then dries it with hot air for up to 2 hours, preventing odors and mildew.
- Dual Scraper Arms: The base features dual scraper arms that clean the base itself during mop washing, reducing stain accumulation.
- Automatic Water Management: For models with automatic water supply and discharge, ensure the connections are secure. The base also automatically adds detergent.
4.2 Dust Collection and Disposal
- The base automatically collects dust from the robot's dust box into a disposable dust bag.
- The dust bag typically needs replacement every 75 days, depending on usage and environment. The base includes a thoughtful storage compartment for spare dust bags.
4.3 Robot Components Cleaning
- Pinzell principal: The robot features a double-blade hair-cutting main brush that cuts and collects hair in real-time, reducing entanglement. Periodically check and clean the main brush as needed.
- Raspalls laterals: The retractable dual robotic arms (side brushes) should also be checked for debris and cleaned.
- Filtre: The robot uses a HEPA filter. Clean or replace the filter regularly according to usage to maintain optimal suction performance.
- Sensors: Wipe the robot's sensors with a soft, dry cloth to ensure accurate navigation.
5. Solució De Problemes
- Robot not connecting to Mi Home app: Ensure your Mi Home app region is set to "China Mainland" and Bluetooth is enabled on your phone. Try resetting the robot's network connection if issues persist.
- El robot es queda encallat amb freqüència: Check for low-lying obstacles or cables that might be trapping the robot. The robot's intelligent navigation with low space prediction should minimize this, but some environments may require pre-cleaning.
- Potència de succió reduïda: Clean the dust box, main brush, and HEPA filter. Ensure the dust bag in the base is not full.
- Mop not cleaning effectively: Check the water tank levels in the base. Ensure the mop pads are clean and properly attached.
- Unusual odors from the base: Ensure the mop pads are thoroughly dried after cleaning cycles. Clean the base's water tanks and scraper arms.
6. Especificacions
6.1 Host Specifications
| Característica | Especificació |
|---|---|
| Model de producte | Aspiradora intel·ligent |
| Model | OV31CN |
| Mida | 350 x 88 mm |
| Potència nominal | 55W |
| Voltage | 14.4 V |
| Vol. De càrregatage | 20 V |
| Pes net | 3.75 kg |
| Capacitat de la bateria | 4800mAh (rated), 5200mAh (nominal) Li-ion |
| Sistema suportat | Android 9.0 o iOS 12.0 i posterior |
| Potència d'aspiració | 23000 Pa |
| Tipus de filtre | HEPA |
| Capacitat de caixa de pols | >2 L |
| Volum del dipòsit de líquid | <3 L |
| Ruta de neteja | Tipus planificat |
| Modes de funcionament | 3-4 |
| Longitud del cable | Sense fil |
| Reserva de temps | Sí |
| Control remot | Sí |
| Certificació | CE |
6.2 All-Purpose Base Specifications
| Característica | Especificació |
|---|---|
| Model | OV31CN-JZ |
| Size (with ramp extensió) | 470 x 360 x 572 mm |
| Size (without ramp extensió) | 260 x 360 x 572 mm |
| Rated Input Power (Hot Water Cleaning) | 1500W |
| Rated Input Power (Drying + Charging) | 80W |
| Potència d'entrada nominal (recollida de pols) | 650W |
| Entrada nominal | 220V-50Hz |
| Sortida nominal | 20V = 2A |
7. Consells d'usuari
- App Region Setting is Crucial: For optimal functionality and device detection, always ensure your Mi Home app's region is set to "China Mainland" before attempting to connect or operate the robot.
- Neteja regular del sensor: To maintain precise navigation and obstacle avoidance, periodically wipe the robot's sensors with a soft, dry cloth.
- Funció de bloqueig infantil: Utilize the child lock feature to prevent accidental operation by children or pets. This setting can typically be found in the Mi Home app.
- Actualitzacions de l'OTA: The robot supports Over-The-Air (OTA) updates. Regularly check for and install updates via the Mi Home app to ensure your device has the latest features and performance improvements.
8. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes de servei, consulteu la pàgina oficial de Xiaomi. weblloc web o poseu-vos en contacte amb el vostre centre de servei Xiaomi autoritzat local. Conserveu el rebut de compra com a comprovant de compra per a reclamacions de garantia.
