1. Introducció
The MiBOXER SPIR3 3-in-1 SPI LED Controller is an advanced lighting control system designed for pixel LED strips. It supports single color, RGB, and RGBW output modes, offering versatile control over your lighting installations. Utilizing 2.4GHz wireless transmission technology, it ensures high-speed communication, strong anti-interference capabilities, and a stable signal. This controller works seamlessly with compatible C6 remote controls and B6 touch panels (purchased separately) to adjust modes, colors, brightness, and dynamic lighting effects.
2. Informació de seguretat
- Assegureu-vos que l'entrada voltage matches the controller's specifications (DC 5-24V).
- No exposeu el dispositiu a la humitat ni a temperatures extremes.
- Desconnecteu l'alimentació abans de fer qualsevol connexió o realitzar tasques de manteniment.
- Aquest dispositiu només està dissenyat per a ús interior.
- Mantenir fora de l'abast dels nens.
3. Components del producte
The MiBOXER SPIR3 system typically includes the following components:
- SPIR3 3-in-1 SPI LED Controller
- C6 Remote Control (optional, sold separately)
- B6 Touch Panel Remote (optional, sold separately)
4. Configuració i instal·lació
4.1 Wiring the SPIR3 Controller
Follow these steps to connect your LED strip to the SPIR3 controller:
- **Connect Light Strips:** First, connect the matching light strips to the output terminals of the SPIR3 controller. Ensure correct polarity (V+, GND, DO1, DO2).
- **Connect Power Supply:** Connect the DC 5-24V power supply to the input terminals of the controller (V+, V-).
- **Optional Push Switch:** A push switch can be connected for additional control, as shown in the diagram.
4.2 Instal·lació de la bateria del comandament a distància
For the C6 Remote and B6 Touch Panel, install 2x AAA batteries (3V) into the battery compartment. Ensure correct polarity.
4.3 Pairing Remote Controls with SPIR3 Controller
The SPIR3 LED Controller must be paired with a C6 Remote or B6 Touch Panel for control. To pair:
- Power on the SPIR3 controller.
- Within 1 second of powering on, press the "ON" button on the B6 or C6 remote three times.
- The LED strip will blink to indicate successful pairing.
5. Instruccions de funcionament
The SPIR3 controller offers various functions through its paired remote controls (C6 or B6). Both remotes feature similar controls for ease of use.
5.1 General Controls (C6 Remote / B6 Touch Panel)
- **ON/OFF:** Power the LED strip on or off.
- **Color Selection:** Adjust RGBW colors.
- **Brightness Adjustment:** Increase or decrease the brightness level.
- **Speed Adjustment:** Control the speed of dynamic modes.
- **Mode Selection (M button):** Cycle through 20 dynamic modes.
- **Scene Saving (S1, S2, S3):** Save and recall up to three custom lighting scenes.
- **Dynamic Mode Editing:** Short press to change the color of dynamic mode, long press to change the direction of dynamic mode.
5.2 Changing Output Mode (SPIR3 Controller)
The SPIR3 controller supports Single Color, RGB, and RGBW output modes. To change the output mode:
- Press the "SET" button on the SPIR3 controller once to activate linking mode.
- Press the "SET" button continuously to cycle through the output modes (Red: Single Color, Green: RGB, Blue: RGBW).
6. Manteniment
- **Cleaning:** Use a soft, dry cloth to clean the controller and remotes. Do not use harsh chemicals or abrasive cleaners.
- **Battery Replacement:** Replace batteries in the remote controls when they no longer respond or the indicator light is dim. Ensure to use 2x AAA batteries for each remote.
- **Storage:** Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| LED strip not responding to remote. |
|
|
| LED strip not lighting up. |
|
|
| Els colors són incorrectes o inconsistents. |
|
|
8. Especificacions
Controlador LED SPI 8.1 SPIR3 3 en 1
| Paràmetre | Valor |
|---|---|
| Model núm. | SPIR3 |
| Voltage | DC 5-24V |
| Sortida | MÀX. 10A |
| Temperatura de treball | -10~40°C |
| Senyal de sortida | SPI(TTL) 800Kbps |
| RF | 2.4 GHz |
| Distància de control | 30 m |
| Pixel Capacity | Single color: 2048 / RGB: 1536 / RGBW: 1024 |
| Compatible Chips | TM1809, TM1804, TM1812, SK6813, UCS1903, UCS1909, UCS1912, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, SK6812(RGBW), WS2813(RGBW), WS2814(RGBW) |
| Certificació | CCC, EMC, FCC, UL |
8.2 SPI Panel Remote (Model: B6)
| Paràmetre | Valor |
|---|---|
| Model núm. | B6 |
| Voltage | 3V (2 * bateries AAA) |
| Consum d'energia en espera | 15μA |
| Potència de transmissió | 6dBm |
| Freqüència de transmissió | 2.4 GHz |
| Temperatura de treball | -10~40°C |
| Distància de control | 30 m |
| Mida | 86*86*15mm (Magnetic Holder: 86*86*5mm) |
8.3 SPI Remote Control (Model: C6)
| Paràmetre | Valor |
|---|---|
| Model núm. | C6 |
| Voltage | 3V (AAA * 2PCS) |
| Potència de transmissió | 6dBm |
| Consum d'energia en espera | 15μA |
| Temperatura de treball | -10~40°C |
| Freqüència de transmissió | 2.4 GHz |
| Mètode de modulació | GFSK |
| Distància de control | 30 m |
| Mida | 45 * 15 * 140 mm |
9. Consells d'usuari
- The B6 Touch Panel Remote features a magnetic suction design, allowing it to be easily attached to a magnetic holder or a metal surface for convenient access. It also has an adhesive-backed base for permanent installation by peeling off the backing.
- For optimal performance, ensure the controller and remote are within the 30m control distance and free from major obstructions.
- Experiment with the 20 dynamic modes and scene-saving functions to personalize your lighting experience.
10. Garantia i Suport
The SPIR3 controller comes with a 2-year warranty. Accessories, such as remote controls, typically come with a 3-month warranty. For support or warranty claims, please contact your seller or refer to the product packaging for specific contact information.
This product is certified with CCC, EMC, FCC, and UL standards, ensuring quality and safety.
