1. Producte acabatview
This kit provides replacement pre-motor filters and a cleaning brush for various Shark AI Robot Vacuum models. The filters are designed to maintain high-efficiency filtration and protect your vacuum's motor by capturing dust, dirt, and allergens.
2. Configuració i instal·lació
Ensure your Shark AI Robot Vacuum is powered off and unplugged before proceeding with filter replacement.
2.1 Compatibilitat
These replacement parts are compatible with the following Shark AI Robot Vacuum models:
- AV2310, AV2310AE, AV2501AE, AV2501S, AV2511AE
- RV2400WS, RV240BLXUS, RV2502AE, RV2502AECA
- RV2300S, RV2310, RV2310AE, RV2320S, RV2360AE, RV2360S
- UR0200SR, UR2500SRCA, UR2350AE, UR2360S
They replace part #XBPFRV2500. Please double-check your robot model before installation.
2.2 Passos d'instal·lació
- Locate the dirt-tank on your Shark AI Robot Vacuum.
- Remove the dirt-bin by firmly grasping it and pulling it out from the vacuum.
- To access the filters, find the release latch on the dirt-bin and pull it to open and empty the bin.
- Carefully remove the old pre-motor filters (both foam and felt).
- Insert the new replacement foam and felt filters into their designated slots within the dirt-bin. Ensure they are seated correctly.
- Close the dirt-bin securely and re-install it into the vacuum cleaner.
3. Filter Function and Operation
These premium foam and felt filters are crucial for your robot vacuum's performance. They are engineered for high-efficiency filtration, capturing 99.7% of contaminants and impurities from the air.
- High Quality Felt Filters: Designed to capture fine dust and allergens.
- Premium Foam Filter: Acts as a pre-filter, capturing larger particles and protecting the felt filter and motor.
- Protecció del motor: Prevents dust and debris from reaching and damaging the vacuum's motor.
- Purificació de l'aire: Helps prevent captured particles from being released back into your home's air, contributing to a cleaner environment.
4. Manteniment
Regular cleaning and timely replacement of your filters are essential for maintaining your Shark AI Robot Vacuum's peak performance and extending its lifespan.
4.1 Instruccions de neteja
The filters are washable and reusable:
- Remove the filters from the dirt-bin as described in the installation steps.
- Wash the filters by hand with warm water. Avoid using harsh detergents or abrasive materials.
- Espremeu suaument l'excés d'aigua.
- IMPORTANT: Allow the filters to completely air dry for at least 24 hours before re-installing them. Do not use a dryer or other heating elements, as this can damage the filter material.
- Use the included multifunctional cleaning brush to remove any stubborn debris from the filters or the dirt-bin.
4.2 Calendari de substitució
Es recomana:
- Wash the filters once a month.
- Replace the filters every 2-3 months, or more frequently depending on usage and household conditions (e.g., presence of pets, high dust levels).
5. Solució De Problemes
- Potència d'aspiració reduïda: If your vacuum's suction power decreases, the filters may be clogged. Remove and clean them as per the maintenance instructions. Ensure they are completely dry before re-installation. If the issue persists after cleaning, replace the filters with new ones.
- Filter Not Fitting Correctly: Double-check that you have purchased the correct replacement filters for your specific Shark AI Robot Vacuum model. Refer to the compatibility list in Section 2.1. Ensure the filters are inserted into the dirt-bin correctly and securely.
- Olors inusuals: If you notice unusual odors from your vacuum, the filters might be holding onto trapped debris or moisture. Clean the filters thoroughly and ensure they are completely dry. If odors persist, consider replacing the filters.
6. Especificacions
| Característica | Detall |
|---|---|
| Material | Premium Foam Felt (Sponge) |
| Color | Blanc |
| Densitat | 60 PPI (Pores Per Inch) |
| Eficiència de filtració | Captures 99.7% of contaminants |
| Contingut del paquet | 6 sets of filter cotton (foam and felt filters), 1 multifunctional cleaning brush |
| Origen | Xina continental |
7. Consells d'usuari
- For optimal performance, always ensure filters are completely dry before placing them back into the vacuum's dirt-tank. Installing wet filters can lead to mold growth and damage to the vacuum.
- Regularly check your vacuum's dirt-tank and filters, especially if you have pets or live in a dusty environment, to prevent premature clogging and maintain strong suction.
- Consider keeping a spare set of filters on hand. This allows for quick replacements, ensuring continuous cleaning while one set is being washed and air-dried.
8. Garantia i Suport
For any questions regarding the installation, maintenance, or performance of these replacement filters, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any potential warranty claims or support inquiries.
