Introducció
The Reolink RLA-BKW4 Wall Mount Bracket is designed to provide a secure and elevated mounting solution for compatible Reolink security cameras on vertical walls. This bracket features a built-in cable management system to neatly conceal and protect network and power cables, ensuring a clean and secure installation while offering broader coverage for your surveillance needs.
Figure 1: Reolink RLA-BKW4 Wall Mount Bracket with camera and concealed cables
Contingut del paquet
Before installation, please verify that all components are present in your package:
Figura 2: Explotat view of bracket components and "What's in the Box"
- Suport de muntatge a la paret
- Coberta superior
- Placa adaptador
- Operational Instruction (this manual)
- Pack of Screws (for mounting)
Compatibilitat
The RLA-BKW4 Wall Mount Bracket is compatible with a range of Reolink cameras and NVR systems. Ensure your device is listed below for proper fit and function.
Figure 3: Versatile Compatibility for Your Needs
Compatible PoE IP Cameras & NVRs:
- D800
- RLC-224A
- RLC-520A
- RLC-833A
- RLC-1240A
- RLC-840A
- RLC-540A
- RLC-843A
Compatible Wi-Fi Cameras & NVRs:
- RLC-840WA
- RLC-843WA
Compatible Dual-Lens Security Cameras:
- Reolink Duo 3V PoE
- Reolink Duo 2V PoE
Compatible Security Camera Systems:
- RLK8-1200D4-A
- RLK8-520D4
- RLK8-800D4
- RLK8-1200V4
- RLK8-500V4
- RLK8-800V4
- RLK8-843V4
Configuració i instal·lació
This bracket is designed for installation on vertical walls, providing an optimal viewing angle and discreet cable management.
Figure 4: Suitable for installation on vertical walls
Passos d'instal·lació:
Figure 5: Simple Installation Guide
- Pas 1: instal·leu el suport
Install the wall mount bracket on a suitable vertical wall surface using the provided screws. Ensure it is securely fastened. - Pas 2: connecteu la càmera
- Step 2-a (Without an Adapter Plate): Align the device's base with the bracket's holes and rotate to secure it.
- Step 2-b (With an Adapter Plate): Align the adapter plate with the bracket's holes and rotate to secure it in place. Then, attach the camera to the adapter plate.
- Step 3: Cable Management and Cover
After routing the necessary wires (network and power cables) through the designated channels in the bracket, slide the top cover over the bracket and secure it with screws. This conceals and protects the cables.
Manteniment
To ensure the longevity and optimal performance of your RLA-BKW4 Wall Mount Bracket, follow these simple maintenance guidelines:
- Neteja regular: Periodically wipe down the bracket with a soft, damp cloth to remove dust, dirt, or debris. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
- Comprovació dels elements de fixació: Annually, inspect all screws and fasteners to ensure they remain tight and secure. Re-tighten if necessary to prevent loosening due to environmental factors or vibrations.
- Inspeccionar per danys: Regularly check the bracket for any signs of physical damage, cracks, or corrosion. If significant damage is observed, consider replacing the bracket to maintain secure mounting.
Resolució de problemes
If you encounter issues during or after installation, refer to the following common troubleshooting tips:
- Bracket Not Secure:
- Ensure you are installing on a suitable wall material (e.g., wood stud, masonry) and using appropriate anchors if needed.
- Verify all screws are fully tightened. Do not overtighten to avoid stripping.
- Camera Does Not Fit:
- Double-check the compatibility list in this manual to confirm your camera model is supported.
- Ensure you are using the adapter plate correctly if your camera requires it (refer to Step 2-b).
- Cables Not Concealed:
- Make sure all cables are routed through the internal channels of the bracket before attaching the top cover.
- Ensure the top cover is correctly aligned and secured to fully enclose the cables.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | RLA-BKW4 |
| Marca | Reolink |
| Origen | Xina continental |
| Pes del paquet | 0.32 kg |
| Dimensions del paquet (L x W x H) | 20 cm x 15 cm x 5 cm |
| Color | Blanc |
Consells per a l'usuari
Here are some helpful tips from users to enhance your experience with the RLA-BKW4 Wall Mount Bracket:
- Pre-drill Pilot Holes: Always pre-drill pilot holes before driving screws into the wall, especially for harder materials, to prevent cracking and ensure a snug fit.
- Longitud del cable: Plan your cable routing carefully. Ensure you have enough slack for connections but not so much that it creates clutter within the bracket.
- Segellat meteorològic: For outdoor installations, consider adding a small bead of outdoor-grade silicone sealant around the edges of the bracket where it meets the wall after installation to further protect against moisture ingress, especially in harsh weather conditions.
- Col·locació òptima: Before final installation, temporarily hold the camera and bracket in place to test different angles and heights to achieve the best possible field of view for your surveillance area.
Garantia i Suport
For technical support, warranty information, or any inquiries regarding your Reolink RLA-BKW4 Wall Mount Bracket, please contact Reolink customer service directly. You can typically find contact details on the official Reolink website or through the seller's support channels.
Conserveu el vostre comprovant de compra per a reclamacions de garantia.
