Manual d'usuari del router Wi-Fi 6 CPE per a interiors ZTE MC801A Pro 5G

1. Introducció

The ZTE MC801A Pro is a high-performance 5G Indoor Customer Premises Equipment (CPE) designed to provide ultra-fast internet connectivity. Featuring the new generation Qualcomm SDX62 platform and Wi-Fi 6 technology, it offers superior speed, wide coverage, and supports both NSA and SA dual-mode 5G networks. This manual will guide you through the setup, operation, and maintenance of your device.

2. Contingut del paquet

Si us plau, reviseu atentament el contingut del paquet. Si falta algun article o està malmès, poseu-vos en contacte amb el vostre venedor.

• ZTE MC801A Pro 5G Indoor CPE
• Power Adapter (AC input: 100V-240V 50Hz/60Hz, DC output: 12V/1.5A)
• Cable Ethernet
• Guia d'inici ràpid / Manual d'usuari
• Targeta de garantia

Figure 2.1: ZTE MC801A Pro and included accessories.

3. Dispositiu acabatview

3.1 Indicadors del panell frontal

Figura 3.1: Frontal view amb indicadors LED.

• SENYAL LED: Indicates the strength of the 5G/4G cellular signal.
• LED XARXA: Indicates the status of the cellular network connection (e.g., 5G, 4G, no service).
• LED WIFI: Indicates the status of the Wi-Fi network.
• LED POWER: Indicates the power status of the device.

3.2 Ports i botons del panell posterior

Figura 3.2: posterior view with ports and buttons.

• Botó WPS: For quick Wi-Fi Protected Setup.
• PHONE Port (RJ11): For connecting a telephone for VoLTE/CSFB services.
• LAN Ports (2x Gigabit RJ45): For connecting wired devices. One port also functions as a WAN port.
• Botó RESET: Used to restore factory default settings (press and hold for 5 seconds).
• Port de l'adaptador d'alimentació: For connecting the power supply.
• SIM Card Slot (4FF): For inserting your Nano-SIM card.

3.3 Bottom Label

Figure 3.3: Bottom label with device information.

The bottom label contains important information such as the device's Serial Number (S/N), IMEI, default Wi-Fi SSID, Wi-Fi Key, Device Manager Website address (e.g., http://192.168.0.1), and the default password for accessing the web interfície.

4. Guia de configuració

4.1 Instal·lació de la targeta SIM

1. Assegureu-vos que el dispositiu estigui apagat.
2. Localitzeu la ranura de la targeta SIM al panell posterior.
3. Insert a standard 4FF (Nano-SIM) card into the slot with the gold contacts facing down and the notched corner oriented correctly. Push until it clicks into place.
4. To remove the SIM card, gently push it in again until it springs out.

4.2 Engegar el dispositiu

1. Connect the power adapter to the Power Adapter Port on the rear of the CPE.
2. Connecteu l'altre extrem de l'adaptador de corrent a una presa de corrent adequada.
3. The device will automatically power on, and the Power LED on the front panel will illuminate.

4.3 Connexió de xarxa inicial

Once powered on, the device will attempt to connect to the 5G/4G network. Observe the SIGNAL and NETWORK LEDs:

• SENYAL LED: Will indicate signal strength (e.g., green for strong, amber for moderate, red for weak/no signal).
• LED XARXA: Will indicate network type (e.g., blue for 5G, green for 4G).

For optimal performance, place the CPE in an open area, away from obstructions, and near a window if possible, to ensure the best cellular signal reception.

4.4 Accés a Web Interfície de gestió

1. Connect your computer to the CPE via Wi-Fi (using the SSID and Wi-Fi Key from the bottom label) or via an Ethernet cable to one of the LAN ports.
2. Obre a web browser and enter the Device Manager Website address (e.g., http://192.168.0.1) a la barra d'adreces.
3. Enter the default password found on the bottom label to log in.
4. Follow the on-screen instructions for initial setup, including changing the default Wi-Fi name and password for security.

5. Instruccions de funcionament

5.1 Connexió de dispositius

• Connexió Wi-Fi: Cerca the Wi-Fi network name (SSID) on your devices and enter the Wi-Fi Key. The CPE supports up to 64 Wi-Fi users simultaneously.
• Connexió WPS: Press the WPS button on the rear panel of the CPE, then activate WPS on your Wi-Fi device within two minutes to establish a connection without entering the password.
• Connexió Ethernet: Connect devices like computers, smart TVs, or gaming consoles to the LAN ports using Ethernet cables for a stable wired connection.
• Connexió telefònica: If supported by your SIM card and service provider, connect a standard telephone to the RJ11 PHONE port for VoLTE/CSFB calls.

5.2 Funcions de xarxa

• 5G NSA+SA Dual Mode: The device automatically switches between Non-Standalone (NSA) and Standalone (SA) 5G networks for optimal performance and coverage.
• Carrier Aggregation (CA) & ENDC Technology: These technologies enhance spectrum utilization, leading to higher data rates, lower latency, and improved network reliability, especially in suburban and rural areas.
• Wi-Fi 6 (802.11ax): Enjoy faster speeds (up to 3600Mbps peak rate), improved efficiency, and better performance in congested environments with Wi-Fi 6 compatible devices.
• Wi-Fi de doble banda: The CPE operates on both 2.4GHz and 5GHz frequencies, providing flexibility for various devices and reducing interference.
• Antena d'alt guany: The integrated 12dBi high gain antenna improves signal reception and penetration, offering stronger signals and wider coverage indoors.
• 5G and Wired Broadband Dual Network: The device supports both cellular and wired broadband internet access. In case of a failure in one mode, it can seamlessly switch to the other to maintain network stability.

Figure 5.1: Advanced 5G Network Technologies.

Figure 5.2: Wi-Fi 6 Capabilities.

Figure 5.3: High Gain Antenna Performance.

Figure 5.4: 5G and Wired Broadband Dual Network.

6. Manteniment

• Restabliment dels valors predeterminats de fàbrica: If you encounter persistent issues or forget your login credentials, you can reset the device. With the device powered on, use a pin to press and hold the RESET button on the rear panel for approximately 5 seconds until the LEDs flash. The device will restart with factory default settings.
• Actualitzacions de firmware: Comproveu periòdicament el web management interface for available firmware updates. Keeping your device's firmware up-to-date ensures optimal performance, security, and access to new features.
• Neteja: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or aerosols. Ensure the device is powered off before cleaning.
• Col·locació: Avoid placing the device in direct sunlight, near heat sources, or in areas with high humidity. Ensure adequate ventilation around the device.

7. Solució De Problemes

7.1 LED Indicator Guide

7.2 Problemes comuns i solucions

• Sense connexió a Internet:
  • Check the NETWORK LED. If red, ensure SIM card is correctly inserted and has an active data plan.
  • Relocate the CPE to an area with better cellular signal (check SIGNAL LED).
  • Reinicieu el dispositiu desendollant i tornant a connectar l'adaptador de corrent.
  • Verifiqueu la configuració de l'APN a web interfície de gestió (consulteu el vostre operador mòbil).
• Velocitat d'Internet lenta:
  • Check SIGNAL LED for optimal signal strength.
  • Ensure your connected devices support Wi-Fi 6 for best Wi-Fi performance.
  • Reduce the number of connected devices or move closer to the CPE.
  • Try connecting via Ethernet to rule out Wi-Fi issues.
• No es pot accedir Web Interfície de gestió:
  • Ensure your device is connected to the CPE's Wi-Fi or via Ethernet.
  • Verify you are using the correct IP address (e.g., http://192.168.0.1).
  • Esborra la memòria cau del navegador o prova un altre navegador.
  • If you forgot the password, perform a factory reset (see Section 6).

8. Especificacions

Figure 8.1: Supported Network Bands.

9. Consells d'usuari

• Col·locació òptima: For the best 5G/4G signal, experiment with different locations in your home or office. Higher locations or near windows often yield better results.
• Seguretat: Always change the default Wi-Fi SSID, Wi-Fi Key, and web management password immediately after initial setup to protect your network.
• Xarxa de convidats: Utilize the guest Wi-Fi feature (if available in the web UI) to provide internet access to visitors without sharing your main network password.
• Connexions per cable: For devices that require maximum stability and speed (e.g., desktop computers, gaming consoles), use the Gigabit Ethernet ports.

10. Garantia i Suport

For warranty information, please refer to the warranty card included in your package or contact your point of purchase. For technical support, please reach out to the vendor or ZTE customer service. Keep your purchase receipt and device serial number handy when contacting support.