TELESIN Diving Waterproof Phone Case (P4-WTP-06)

1. Producte acabatview

The TELESIN Diving Waterproof Phone Case (Model P4-WTP-06) is designed to transform your smartphone into a powerful underwater camera, allowing you to capture stunning photos and videos up to 20 meters (65 feet) deep. Featuring IP68 waterproof certification, Bluetooth control, and an anti-fog vacuum system, this grip ensures clear, stable, and responsive operation.

Image 1.1: TELESIN Diving Waterproof Phone Case and included accessories.

1.1 Contingut del paquet

Assegureu-vos que tots els elements estiguin presents al vostre paquet:

• Diving handle × 1
• Vacuum pump × 1
• USB charging cable × 1
• Safety hand strap × 1
• Lens cloth × 1
• Manual d'instruccions × 1

Imatge 1.2: Tots els elements inclosos al paquet del producte.

1.2 Identificació de components

Familiarize yourself with the key components of the diving phone case:

• Sealing Buckles: Tanqueu la caixa de manera segura.
• Vacuum Valve: Used with the vacuum pump to remove air and prevent fogging.
• Botó de captura: Initiates and stops photo/video recording.
• Mode Button 1 & 2: Switches between shooting modes.
• Zoom In (T) / Zoom Out (W) Buttons: Adjusts the camera's zoom.
• 1/4" Inch Thread Hole: For attaching to tripods or other accessories.
• Pogo Pin Charging Port: For charging the internal battery of the diving handle.

2. Guia de configuració

2.1 Watertight Safety Test (Mandatory Before First Use)

Before placing your phone inside, perform a watertight test to ensure the case is sealed correctly:

1. Place a tissue inside the case.
2. Seal both the case and the vacuum cover securely.
3. Fully submerge the case in water for 30+ minutes.
4. Do not open the case immediately after retrieval.
5. Check if the tissue remains dry. If dry, the waterproof seal is verified. If wet, contact official support.

Image 2.1: Performing the watertight safety test by submerging the case with a tissue inside.

2.2 Vinculació Bluetooth

To enable remote control functionality:

1. Power on the diving handle.
2. On your phone, go to Bluetooth settings and connect to "TELESIN SDC".

Nota: The device will auto-shutdown after 2 minutes if unpaired.

Image 2.2: Demonstrating Bluetooth pairing between the diving handle and a smartphone.

2.3 iOS Initial Setup (One-Time Only)

For iOS devices, a one-time setup is required for full functionality:

1. Vés a Configuració → Accessibilitat → Zoom.
2. Seleccioneu Zoom Region i tria Zoom de pantalla completa.
3. Activa Zoom.

Nota: When Zoom is enabled, the screen magnifies. Triple-tap with two fingers to reset the view. Other settings should remain unchanged. This step is not required for Android devices, as full features unlock via Bluetooth.

2.4 Phone Settings for Optimal Use

To prevent interruptions during underwater shooting:

• Activa Mode No Molestis on your smartphone to prevent notifications and interruptions.

2.5 Phone Installation Procedure

Follow these steps to correctly install your phone into the case:

1. Unlock all 5 latches on the case and open the cover.
2. Remove your phone from any existing phone case to ensure a bare-metal installation for better shooting results.
3. Carefully align your phone's lens with the viewport of the diving case.
4. Flush the phone against the left edge of the case and secure it in the internal clamp.
5. Prova: Switch your phone's camera to the widest lens setting. If the view is blocked, adjust the phone slightly rightward (e.g., for iPhone 12 Mini).
6. Close the cover and lock all latches securely.
7. Unscrew the vacuum port counterclockwise.
8. Press the rubber head of the vacuum pump firmly onto the port and pump 3-4 times to remove air.
9. Tighten the vacuum port clockwise. This process prevents air condensation and eliminates lens/screen fogging.

Image 2.3: Step-by-step guide for installing your smartphone and using the vacuum pump to prevent fogging.

2.6 Attaching the Safety Leash

For added security, especially during freediving or scuba diving where hands-free operation might be needed (e.g., ear equalization, hand signals), attach the safety leash to your wrist.

3. Instruccions de funcionament

The TELESIN Diving Phone Case features intuitive controls for seamless underwater photography.

3.1 botons de control

The ergonomic 5-key control panel provides DSLR-like functionality:

• Capture Button (Orange): Single press to start/stop recording photos or videos.
• Zoom Out (W) Button: Adjusts the camera to a wider angle.
• Zoom In (T) Button: Adjusts the camera to telephoto.
• Mode Button 1 (M): Single press to switch between shooting modes. Long press (2s) to quick-launch the camera from sleep mode.
• Mode Button 2 (M): Single press to switch between shooting modes. Long press (2s) to switch between front/back cameras.

Imatge 3.1: Detallada view of the five-key control panel, showing Capture, Zoom (W/T), and Mode (M) buttons. The buttons are designed for easier underwater operation to avoid accidental contact due to water pressure.

3.2 Usage Demonstration

4. Manteniment

4.1 Neteja

• After each use, especially in saltwater, rinse the case thoroughly with fresh water.
• Wipe the case dry with a soft cloth. Use the included lens cloth for the viewport to avoid scratches.
• Ensure no sand or debris is lodged in the latches or seals.

4.2 Emmagatzematge

• Store the case in a cool, dry place away from direct sunlight.
• Do not store with latches closed tightly for extended periods to prevent deformation of the rubber seals.

4.3 Càrrega de la bateria

• Charge the diving handle using the provided USB charging cable via the Pogo Pin charging port.
• Una càrrega completa triga aproximadament 2 hores.

5. Solució De Problemes

• Fogging inside the case: Re-perform the vacuum pumping procedure to ensure all air is removed.
• Entrada d'aigua: If the watertight safety test fails (tissue gets wet), do not use the case. Contact official support immediately.
• Bluetooth no connectat: Ensure the diving handle is powered on. Try unpairing and re-pairing the device. Remember, the device auto-shuts down after 2 minutes if unpaired.
• Botons que no responen: Check that your phone is correctly aligned within the case and that the Bluetooth connection is active.
• Screen magnification (iOS): If the screen is magnified due to the iOS Zoom accessibility feature, triple-tap the screen with two fingers to reset the view.

6. Especificacions

Image 6.1: Product dimensions in centimeters and inches.

7. Consells d'usuari

• Funcionalitat de pantalla tàctil: The touchscreen of your phone will not be accessible when inside the waterproof case. All camera controls are managed via the physical buttons on the diving handle.
• Foto i vídeo: The case supports both photo and video capture, allowing you to switch between modes using the dedicated mode buttons.
• Bare-Metal Installation: For the best fit and optimal shooting results, always remove your phone from its regular protective case before installing it into the diving case.
• Prevent Interruptions: Always enable 'Do Not Disturb' mode on your phone before diving to avoid incoming calls or notifications that could disrupt your shooting or potentially affect the phone's functionality underwater.
• La seguretat primer: Always use the provided safety leash, especially during dynamic underwater activities, to prevent accidental loss of the device.
• Correcció de color: Consider using the TELESIN free color-grading app (launching July) to automatically correct red-light attenuation for true-to-life underwater colors.

8. Garantia i Suport

For any product defects, malfunctions, or support inquiries, please contact TELESIN customer service. Refer to your purchase documentation for specific warranty terms and contact information.