ZYFeeder 7L Stainless Steel Pet Water Fountain User Manual

1. Producte acabatview

The ZYFeeder 7L Stainless Steel Pet Water Fountain is designed to provide a continuous supply of fresh, filtered water for your pets. Featuring a large capacity, ultra-quiet operation, and a durable stainless steel construction, it promotes healthy hydration for both cats and dogs.

2. Precaucions de seguretat

• Assegureu-vos que la font estigui col·locada sobre una superfície estable i anivellada per evitar que es bolqui.
• No submergiu els components elèctrics en aigua.
• Desendolleu sempre la font abans de netejar-la o fer-ne el manteniment.
• Keep out of reach of children and pets that may chew on the power cord.
• Utilitzeu només amb l'adaptador d'alimentació subministrat.

3. Instruccions de configuració

3.1 Desembalatge i comprovació de components

Traieu amb cura tots els components de l'embalatge. Verifiqueu que hi hagi totes les peces:

• Stainless Steel Water Bowl
• Bomba d'aigua
• Safata de filtre
• PP Grid
• Non-Woven Fabric Filter
• Filtre de carbó actiu
• Ion Exchange Resin Filter
• Broquet de l'aixeta
• Adaptador de corrent (5 V)

3.2 Muntatge

1. Rinse all components (except the power adapter) with water before first use.
2. Place the water pump at the bottom of the stainless steel bowl.
3. Assemble the filter system:
   • Place the Ion Exchange Resin filter into the designated slot in the filter tray.
   • Place the Activated Carbon filter on top of the Ion Exchange Resin filter.
   • Place the Non-Woven Fabric filter on top of the Activated Carbon filter.
   • Place the PP Grid on top of the Non-Woven Fabric filter.
4. Position the assembled filter tray over the water pump.
5. Insert the faucet spout into the pump outlet.
6. Fill the stainless steel bowl with water up to the maximum fill line (visible through the water level window).
7. Connect the power adapter to the fountain and then plug it into a wall outlet.

4. Instruccions de funcionament

4.1 Encès/Apagat

To turn the fountain on or off, press and hold the power button for 3 seconds.

4.2 Clock Time Setting

1. Press and hold the "setting key" for 3 seconds. The hour number will flash.
2. Use the "+" or "-" keys to adjust the hour.
3. Press the "Set button" again. The minute numbers will start to flash.
4. Use the "+" or "-" keys to adjust the minutes to the correct time.

4.3 Feeding Time Setting (If applicable)

This fountain model is primarily a water dispenser. The provided operation manual mentions "feeding time setting" and "number of turns", which typically applies to automatic feeders. If your model includes a feeding function, follow these steps:

1. When the hour digits are flashing (after setting the clock), press the "Set button".
2. Use the "+" or "-" keys to adjust the feeding time.
3. Press the "Set button" again. The minute digits and the first box will flash simultaneously.
4. Use the "+" or "-" keys to adjust the minute you need to feed.
5. Press the "Set button" again. The first box will flash.
6. Use the "+" or "-" keys to adjust the number of turns (1 means 1 turn, 2 means 2 turns). If no number is set in the box, no feeding is scheduled.
7. Once finished, press the "Setup key" to save and exit.

Note: This model is designed as a water fountain. The "feeding time" functionality may not be present or fully utilized in all variants.

5. Manteniment

5.1 Cleaning the Fountain

The 304 food-grade stainless steel design is dishwasher safe (excluding electrical components) for easy and hygienic cleaning. Regular cleaning prevents bacteria buildup and ensures fresh water for your pet.

1. Unplug the fountain from the power outlet.
2. Disassemble all components: remove the faucet, filter tray, and pump.
3. Clean the stainless steel bowl and filter tray with mild soap and water, or place them in the dishwasher.
4. Clean the water pump: Remove any hair or debris from the impeller and pump housing. Use a small brush if necessary.
5. Esbandiu bé tots els components per eliminar qualsevol residu de sabó.
6. Reassemble the fountain as described in the Setup section.

5.2 Substitució del filtre

The triple filtration system requires regular filter replacement to maintain water quality. It is recommended to replace the filter set (PP Grid, Non-Woven Fabric, Activated Carbon, Ion Exchange Resin) every 2-4 weeks, depending on the number of pets and water quality.

• Unplug the fountain and disassemble the filter tray.
• Discard the old filter components.
• Rinse new filter components before placing them into the filter tray.
• Reassemble the filter tray and fountain.

6. Solució De Problemes

• Fountain not dispensing water:
  • Check if the power adapter is securely plugged into both the fountain and the wall outlet.
  • Ensure there is sufficient water in the reservoir.
  • Clean the water pump and impeller for any blockages (e.g., pet hair).
  • Verify that the filter components are correctly assembled and not obstructing water flow.
• Soroll excessiu:
  • Ensure the water level is above the minimum mark. Low water levels can cause pump noise.
  • Clean the pump thoroughly, as debris can cause vibrations.
  • Check if the pump is properly seated in its designated spot.
• Water quality issues (e.g., cloudy water, odor):
  • Replace the filter set.
  • Clean the entire fountain thoroughly, including the bowl and pump.
  • Ensure you are using clean, fresh water.

7. Especificacions

8. Consells d'usuari

• Font d'alimentació: The fountain is powered by a 5V adapter and does not include a battery. Ensure it is always plugged into a suitable power outlet for operation.
• Indicador de nivell d'aigua: The fountain features a clear water level window, allowing you to easily monitor the water volume and refill as needed. A blue indicator light is visible in this window.
• Encouraging Pet Use: Some pets may take time to adjust to a new water fountain. You can encourage them by placing their favorite treats near the fountain or by temporarily removing other water sources.

9. Garantia i Suport

For detailed warranty information and customer support, please refer to the official product documentation or contact the seller directly.

An electronic version of the user manual (PDF) can be found aquí.