Manual d'instruccions

1. Producte acabatview

These soft rubber flatback figurines feature a charming big-eared monster design, ideal for various DIY craft projects. Made from durable PVC, they are perfect for adding a unique touch to scrapbooks, phone cases, hair accessories, and other decorative items. Each pack contains 10 pieces, allowing for multiple creative applications.

Image: Four big-eared monster figurines, showcasing their design and flat back for easy application.

2. Configuració i preparació

Before applying the figurines, ensure your workspace and materials are ready.

2.1 Materials requerits

• Big Eared Monster Flatback Figurines (included)
• Appropriate adhesive (e.g., craft glue, E6000, super glue – not included)
• Cleaning solution (e.g., rubbing alcohol) and lint-free cloth
• Tweezers or small tools (optional, for precise placement)

2.2 Preparació de la superfície

1. Netegeu la superfície: Thoroughly clean the surface where the figurine will be applied. Use rubbing alcohol or a suitable cleaner to remove any dust, oils, or residues. Allow the surface to dry completely.
2. Col·locació del pla: Before applying adhesive, arrange the figurines on your desired surface to visualize the final layout.

3. Instruccions d'aplicació

Follow these steps to securely attach your flatback figurines:

1. Aplicar adhesiu: Apply a small, even amount of your chosen adhesive to the flat back of the figurine. Avoid using too much glue, as it may seep out from under the figurine.
2. Position the Figurine: Carefully place the figurine onto the prepared surface in your desired position. Use tweezers for small or intricate placements.
3. Premeu amb fermesa: Gently but firmly press the figurine onto the surface for a few seconds to ensure good contact with the adhesive.
4. Temps de curació: Allow the adhesive to cure completely according to the manufacturer's instructions. This may take several hours or even overnight. Avoid disturbing the figurine during this time.

Image: Figurines held in hand, demonstrating their compact size for craft applications.

4. Manteniment i cura

To keep your figurines looking their best, follow these simple care guidelines:

• Neteja: If the figurines become dirty, gently wipe them with a soft, damp cloth. For stubborn dirt, a mild soap solution can be used, followed by rinsing with a damp cloth and air drying.
• Eviteu productes químics durs: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the PVC material or the applied finish.
• Emmagatzematge: Store unused figurines in a cool, dry place away from direct sunlight to prevent material degradation or discoloration.

5. Solució De Problemes

5.1 Figurine Not Sticking

• Check Surface Cleanliness: Ensure the application surface was thoroughly cleaned and dry before applying adhesive.
• Tipus d'adhesiu: Verify that the adhesive used is suitable for both the figurine's PVC material and the surface material. Some surfaces may require specialized glues.
• Temps de curació: Allow sufficient time for the adhesive to fully cure without disturbance.

5.2 Figurine Damaged

• If a figurine is significantly damaged, it is recommended to replace it with a new one from the pack.

6. Especificacions

Image: Close-up of a figurine showing its approximate dimensions (39mm x 25mm).

7. Consells d'usuari

• Adhesive Choice: For best results, select an adhesive specifically designed for PVC and your target surface (e.g., plastic, wood, metal, fabric).
• Primera prova: If unsure about the adhesive or surface compatibility, test on an inconspicuous area or a spare piece of material.
• Ventilació: When using strong adhesives, ensure adequate ventilation in your workspace.
• Precisió: Use fine-tipped applicators or toothpicks to apply glue for small details and to avoid excess.

8. Preguntes freqüents (FAQ)

Q: Are these figurines waterproof?

A: While the PVC material itself is water-resistant, the waterproof nature of your finished craft will depend on the adhesive used and how well it seals the figurine to the surface. For items that will be exposed to water, choose a waterproof adhesive.

Q: Can I use these on clothing or fabric?

A: Yes, you can use these on fabric. Ensure you use a fabric-specific adhesive that remains flexible after drying and is suitable for washing (if applicable). Always follow the adhesive manufacturer's instructions for fabric application and care.

Q: How do I remove a figurine if I make a mistake?

A: Removal depends heavily on the type of adhesive used and the surface. For most craft glues, gentle prying with a thin tool might work, but it could leave residue or damage the surface. Always exercise caution and test removal methods on an inconspicuous area first.

9. Garantia i Suport

This product is intended for decorative craft use. For any questions regarding the product or its application, please contact the seller or manufacturer directly. Please note that the longevity and performance of the figurines when applied to a surface are dependent on the adhesive used and the care taken during and after application.