1. Introducció
The SpeedyBee Master 5 V1 V2 is a programmable WS2812 Cellular LED board designed for FPV drones. This 5V RGB LED offers customizable lighting options, making your drone stand out with bright and durable illumination. This manual provides essential information for the proper setup, operation, and maintenance of your LED board.
2. Configuració i instal·lació
The SpeedyBee Master 5 LED board offers flexible connection options to your Flight Controller (FC).
2.1 Mètodes de connexió
You can connect the LED strip using two primary methods:
- Direct Plugging: Connect the LED strip directly to your FC via the provided connector.
- Soldadura: Solder the connection cable to the appropriate pads on your FC. This method supports both soldering and free-soldering configurations.
2.2 ESC Protection
A shockproof foam is included to protect the LED board from potential interference or damage from the Electronic Speed Controller (ESC). Ensure proper placement of this foam during installation.
3. Instruccions de funcionament
The SpeedyBee Master 5 V1 V2 LED board features programmable WS2812 cellular LEDs, allowing for extensive customization of lighting patterns and colors. Configuration is typically done via your Flight Controller's software (e.g., Betaflight, EmuFlight, INAV) where you can define LED sequences, colors, and effects. Refer to your Flight Controller's documentation for specific software setup instructions for WS2812 LEDs.
3.1 Engegada/apagada
The LED board is powered directly from your Flight Controller's 5V output. It will illuminate when the FC receives power and is configured to control the LEDs.
3.2 Personalització
Utilize your Flight Controller's configurator software to program desired LED patterns, colors, and responses to flight modes or events. Ensure the correct LED type (WS2812) and number of LEDs are selected in the software.
4. Manteniment
To ensure the longevity and optimal performance of your SpeedyBee Master 5 V1 V2 LED board, follow these maintenance guidelines:
- Neteja: Gently clean the LED board with a soft, dry brush or compressed air to remove dust and debris. Avoid using liquids or harsh chemicals.
- Inspecció: Periodically inspect the solder joints and connections for any signs of damage or corrosion.
- Emmagatzematge: When not in use, store the LED board in a dry, anti-static environment.
- Manipulació: Handle the board by its edges to avoid touching the electronic components, especially the LEDs, which can be sensitive to static discharge.
5. Solució De Problemes
If you encounter issues with your LED board, consider the following troubleshooting steps:
- Els LED no s'encenen:
- Check all connections to the Flight Controller (5V, GND, DIN) for proper seating and continuity.
- Verify that the Flight Controller is supplying 5V power to the LED output.
- Ensure the LED feature is enabled and correctly configured in your Flight Controller's software (e.g., Betaflight LED Strip tab).
- Confirm the correct number of LEDs and the WS2812 type are selected in the software.
- Incorrect colors or flickering:
- Comproveu si hi ha connexions soltes o cables danyats.
- Ensure the data line (DIN) is properly connected and not experiencing interference.
- Review your Flight Controller's software configuration for any errors in LED setup.
- Partial LED failure:
- This may indicate a damaged LED or a break in the data line. Inspect the board for physical damage.
If problems persist after these steps, contact SpeedyBee support or your retailer for further assistance.
6. Especificacions
Below are the detailed specifications for the SpeedyBee Master 5 V1 V2 Programmable WS2812 Cellular LED board:
6.1 General
- Número de model: Master 5 V1 V2
- Material: Metall
- Quantitat: 1 unitats
- Per al tipus de vehicle: Airplanes (FPV Drones)
- Subministraments d'eines: Classe reunida
- Atributs de la tracció a les quatre rodes: Muntatge
- Perifèrics/dispositius de control remot: ESC (for context, not part of the LED board itself)
- Actualitzar peces/accessoris: Programmable 2812 Cellular LED
- Recanvis i accessoris RC: Programmable 2812 Cellular LED
- Edat recomanada: 14+ anys
- Ús: Vehicles i joguines amb control remot
- Certificació: CE
- És elèctric: Sense bateria
- És bateria/font d'alimentació: N
- És un carregador/adaptador? N
- S'inclouen les piles: No
- Substància química molt preocupant: Cap
- Mida: NA (Specific dimensions provided below)
6.2 Dimensions i pes
| Mesurament | Valor |
|---|---|
| Amplada | 21 mm |
| Alçada | 19 mm |
| Gruix | 4.7 mm |
| Pes | 1 g |
6.3 Lamp Beads Electrical Characteristics
Absolute Maximum Ratings (Temperature=25°C)
| Especificacions | Símbol | Interval | Unitat |
|---|---|---|---|
| Logic power voltage | VDD | 3.0~7.5 | V |
| R/G/B output withstand voltage | Vds | 9 | V |
| Entrada lògica voltage | VI1 | 0.5~5.5 | V |
| R/G/B output current | I fora | 12 | mA |
| Temperatura de treball | Topr | -40~+85 | °C |
| Temperatura d'emmagatzematge | Tstg | -50~+150 | °C |
| Resistència ESD voltage | Vesd | 5k | V |
Notice: Pulse width ≤0.1ms, duty ratio ≤1/10
Electrical Optical Characteristics (Temperature=25°C)
| Especificacions | Símbol | Min | Tip | Màx | Unitat |
|---|---|---|---|---|---|
| Chip working voltage | VDD | - | 5 | 7.5 | V |
| R/G/B output withstand voltage | Vds | - | - | 9 | V |
| R/G/B output drive current | Iou | - | 12 | - | mA |
| Vol d'entrada d'alt nivelltage | VIH | 0.7Vdd | - | - | V |
| Vol d'entrada de baix nivelltage | VIL | - | - | 0.3Vdd | V |
| Freqüència PWM | FPWM | - | 4 | - | KHZ |
| Consum d'energia estàtica | En efecte | - | 0.3 | - | mA |
7. Consells d'usuari
- Comprovació prèvia al vol: Always perform a visual check of your LED connections before each flight to ensure they are secure.
- Configuració del programari: Take time to explore the LED configuration options in your Flight Controller software. Many advanced features and effects can be unlocked with proper setup.
- Consideracions sobre l'energia: While the board operates on 5V, ensure your Flight Controller's 5V regulator can supply sufficient current for all connected LEDs, especially if you are using multiple LED strips.
8. Garantia i Suport
For warranty information and technical support regarding your SpeedyBee Master 5 V1 V2 Programmable WS2812 Cellular LED, please refer to the official SpeedyBee weblloc web o poseu-vos en contacte amb el distribuïdor on vau comprar el producte. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
