NYXI Wizard Wireless Joy-pad Product Manual

Introducció

Benvolgut jugador,

Gràcies per la compraasing the NYXI Wizard Wireless Joy-pad. This manual provides detailed instructions for setting up, operating, and maintaining your new controller. Please read it carefully before use to ensure optimal performance and a better gaming experience.

Nota: For a better gaming experience, please fully charge the controller when using it for the first time.

Contingut del paquet

Assegureu-vos que el paquet inclogui tots els elements següents:

• 1 x Left-hand handle
• 1 x Right-hand handle
• 1 x cable de càrrega USB
• 1 x Manual d'usuari
• 1 x Intermediate bridge (Frame)
• 2 x Round replacement rocker rings

Especificacions

Guia de configuració

1. Wired Direct Connection

To connect the Joy-pad directly to your Nintendo Switch console, slide the left and right handles onto the sides of the console until they click into place. The console will automatically recognize the controllers.

Diagram: Wired direct connection to the console.

2. Connexió sense fil

Per connectar-se sense fils:

1. Open your Nintendo Switch console.
2. Navega a: Configuració del sistema > Controladors i sensors > Canvia d'adherència/ordre.
3. On the NYXI Wizard Joy-pad, long-press the SYNC key. The four channel lights on the controller will flash.
4. The Joy-pad will automatically connect to the console.

Image: Pressing the SYNC button for wireless pairing.

3. Instruccions de càrrega

• When the controller is turned off and charging, the LEDs will flash. They will turn off once fully charged.
• When charging wirelessly, the corresponding channel light will flash slowly. It will stay on solid when fully charged.
• The controller can also be charged by attaching it to the Switch console, which is then connected to a power adapter. If the console is not plugged into a power adapter, it will charge the controller when the controller's voltage és inferior a 3.7V.
• Alarma de bateria baixa: If the controller battery voltage drops below 3.3V, the corresponding channel light will flash, indicating that charging is required.

4. Funció de despertador

You can wake up the controller from sleep mode by pressing any button, except for L3, R3, TURBO, Profile, FL, and FR buttons. The controller will then attempt to reconnect to the console.

Nota: Do not touch the 3D joystick during the connection process to avoid accidental input.

Instruccions de funcionament

1. Turbo Function and Speed Adjustment

The Turbo function allows for rapid, repeated input of a button.

• Mode de configuració: Premeu TURBO + any settable function button (UP, DOWN, LEFT, RIGHT, A, B, X, Y, L, R, ZL, ZR).
• Mode continu:
  1. Premeu TURBO + function button once for manual continuous turbo.
  2. Premeu TURBO + function button twice for automatic continuous turbo.
  3. Premeu TURBO + function button three times to turn off continuous turbo.
• Cancel All Turbo: Premsa llarga TURBO for three seconds to cancel the burst function for all buttons.
• Ajust de velocitat turbo:
  • Left-hand grip: Press TURBO + - (minus button)
  • Right-hand grip: Press TURBO + + (plus button)

  Adjustable burst speeds: 5HZ, 12HZ, 20HZ. The default speed is 12HZ.

• Turbo Setting Indicator: The LED lights up white when the button is not set. It turns blue after setting and flashes blue with the burst speed when active.

2. Back-Button Mapping & Macro Programming

The controller must be connected to the console. Please cancel any continuous turbo settings before programming.

• Back Button Mapping Method:
  • Left Back Button (FL): Premeu Profile + any settable button on the left (UP, DOWN, LEFT, RIGHT, L, ZL, L3, VRL) + Profile.
  • Right Back Button (FR): Premeu Profile + any settable button on the right (A, B, X, Y, R, ZR, R3, VRR) + Profile.

  The FL and FR buttons can record up to 21 button values, and the output will follow the time interval of the entry.
• Back Button Setting Indicator: The first time you press the Profile button for setting, the LED will change from white to blue and flash. After the setting is complete, pressing the Profile button will show a solid blue light.
• Clear Back Button Settings: When connected to the host, hold both the left and right handle Profile buttons for 3 seconds. The original functions set on the FL and FR buttons will be cleared, and the LED will turn to a long white light.

3. Motor Vibration Adjustment

Adjust the intensity of the motor vibration:

• Mètode d'ajust: While connected, press TURBO + (corresponding) joystick up to enhance vibration, or cap avall to weaken it. A 2-second vibration prompt will confirm successful adjustment.
• Nivells de vibració: 100% - 70% - 30% - 0%. The default intensity is 70%.

Image: Adjustable vibration rumble levels.

4. ABXY Light Adjustment

The ABXY buttons feature adjustable illumination:

• While connected, press TURBO + double-click the right joystick to turn the light effect on or off.
• Premeu TURBO + long-press the right joystick to adjust the brightness of the ABXY buttons.

Image: Illuminated ABXY buttons.

5. Factory Setting "Lock Mode"

This mode prevents accidental input or changes to settings.

• Mètode de configuració: When the controller is in sleep mode, press and hold the "SL" i "SYNC" buttons for 5 seconds. The channel indicator LED1 will light up and flash slowly 3 times.
• Mode de desbloqueig: To unlock, charge the controller with a USB cable while it is mounted on the Switch console rail.

6. Rocker Ring Replacement

The joystick rings are interchangeable for different gaming preferences (e.g., round for racing, octagonal for fighting games).

Image: Interchangeable Joystick Rings.

1. Step 1: Rotate the Rocker Ring
   Rotate the rocker circle alignment line counter-clockwise until it forms a 45° angle with the handle alignment point.


Diagram: Rotate the rocker ring to a 45-degree angle.

2. Step 2: Remove the Rocker Ring
   Pull up the rocker ring and rocker cap vertically to remove them.


Diagram: Pull up the rocker ring and cap.

3. Step 3: Install the New Rocker Ring
   Place the new rocker ring pins against the handle alignment point and press down firmly.


Diagram: Press the new rocker ring into position.

4. Step 4: Secure the Rocker Ring
   Rotate the rocker ring 45° clockwise to align the rocker ring alignment line with the handle alignment point, securing the replacement.

7. Calibration Rocker

To calibrate the joysticks and prevent drift:

1. Connect the controller to the Switch console.
2. Vés a Configuració del sistema > Controladors i sensors > Calibrar els pals de control.
3. Select the joystick you wish to calibrate and press the X botó, després el A botó.
4. Follow the on-screen prompts to move the stick up, down, left, right, and in a circle.

Image: Nintendo Switch joystick calibration screen.

Nota: If the cursor bounces outside the innermost circle during calibration, press the B button to exit and correct it again.

Consells per a l'usuari

• This controller is compatible with multiple Nintendo Switch models, including the original Switch, Switch 2, Switch OLED, and Switch Lite.
• The Hall Effect joysticks are designed to prevent drift, offering a more reliable gaming experience over time.
• The mecha-tactile triggers provide a lighter feel and shorter travel distance (0.3mm), which can be beneficial for games requiring quick reactions.

Resolució de problemes

• El controlador no es connecta: Ensure the controller is charged. For wireless connection, verify the Switch console is in 'Change Grip/Order' mode and you are pressing the SYNC button on the controller. For wired, ensure it's securely attached to the console.
• Bateria baixa: If the channel light flashes, charge the controller immediately.
• Joystick Drift: Perform a joystick calibration through the Switch System Settings as described in the 'Calibration Rocker' section.
• Accidental Inputs/Settings Changes: If you experience unintended inputs or settings changes, activate the 'Factory Setting "Lock Mode"' to prevent further issues.

Garantia i Suport

Please follow the instructions for use strictly. If you encounter any problems during use, you can contact us for consultation and solution. Our email is: service@nyxigaming.com. We will handle your inquiry within 24 hours.

Precaucions de seguretat

• No exposar el producte a líquids.
• No desmunteu el producte.
• Eviteu deixar caure el producte.
• Avoid exposing the product to extremely high or low temperatures.

The symbol indicates that the product should not be disposed of with household waste but should be brought to an appropriate collection point for recycling. According to local regulations, do not dispose of the product or rechargeable battery with normal household waste. Appropriate disposal of used products and rechargeable batteries helps to prevent negative impacts on the environment and human health.