Manual d'usuari de l'efector combinat Sonicake QCE-20

1. Producte acabatview

The Sonicake QCE-20 is a versatile combined effector designed for electric, bass, and acoustic guitars, offering a range of essential effects in a compact unit. It features a modular design with effects such as Compression, Reverberation, Delay, Chorus, Speaker Simulation, and a DI Box function, making it suitable for various playing styles including Rock, Blues, and Acoustic genres.

This pedal provides a one-stop gig solution for acoustic instrument players with main effects needed, including an analog preamp with 2-band EQ to recreate a classic acoustic guitar amplifier, providing a warm, natural sound. It also includes high-quality chorus, delay, and reverb effects for different playing scenarios.

2. Guia de configuració

Follow these steps to set up your Sonicake QCE-20 Combined Effector:

1. Connexió d'alimentació: Connect a standard DC 9V power adapter (not included) to the DC 9V power interface (6) on the pedal. Ensure the power supply meets the pedal's requirements to avoid damage.
2. Entrada d'instrument: Connect your guitar (electric, bass, or acoustic) to the IN (8) input interface using a standard 1/4-inch instrument cable.
3. Connexió de sortida: Connect the OUT (1) output interface to your amplifier, mixer, or audio interface. For a balanced signal to a sound card or PA mixer, utilize the XLR OUT.
4. Activa els efectes: Use the individual footswitches (9) to engage or bypass the desired effect modules (Reverb, Delay, Chorus, Compression).
5. Ajustar els controls: Begin with all control knobs at their neutral or 12 o'clock position and adjust them gradually to achieve your desired sound.

3. Instruccions de funcionament

The Sonicake QCE-20 features several integrated effects modules. Refer to Figure 2 for control locations.

3.1. Funcions de control

• 1. SORTIDA: Main output interface for connecting to a speaker or ampmés viu.
• 2. AIR (Reverb Module): Controls the reverb effect. Use the MIN knob to adjust the reverb level.
• 3. SIMULACRE DE CABINA: Toggle switch for engaging or disengaging the cabinet simulation.
• 4. SLAPBACK (Delay Module): Controls the delay effect. Use the TEMPS knob for delay time adjustment and the REPETIR knob for the number of repeats.
• 5. BLUES (Speaker Simulation Module): Controls the speaker simulation. Use the VOL knob for volume, TO knob for brightness, and GUANYA botó per ajustar el guany.
• 6. DC 9V: Interfície d'entrada d'alimentació de CC.
• 7. COMP (Compression Module): Controls the compression effect. Use the VOL knob for volume and the COMP knob for compression intensity.
• 8. EN: Instrument input interface.
• 9. Pedal: Engages or bypasses the respective effect module.

3.2. Signal Chain

The internal signal chain is designed for optimal sound. Experiment with engaging different effects in combination to discover unique tones. The order of effects is generally: Compression > Blues (Speaker Simulation) > Delay > Reverb.

4. Manteniment

To ensure the longevity and optimal performance of your Sonicake QCE-20, please follow these maintenance guidelines:

• Neteja: Use a soft, dry cloth to clean the pedal's surface. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and internal components.
• Emmagatzematge: Store the pedal in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. When not in use for extended periods, disconnect the power supply.
• Manipulació: Handle the pedal with care. Avoid dropping it or subjecting it to strong impacts, which can damage internal circuitry or external controls.
• Font d'alimentació: Always use a regulated DC 9V power supply with the correct polarity (center negative) to prevent electrical damage.
• Connexions: Periodically check all cable connections for wear and tear. Ensure cables are securely plugged in during use.

5. Solució De Problemes

If you encounter issues with your Sonicake QCE-20, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact Sonicake customer support for further assistance.

6. Especificacions

• Model: QCE-20
• Marca: Sonicake
• Efectes: Compression, Blues (Speaker Simulation), Slapback (Delay), Air (Reverb), Preamp, DI Box
• Entrada: 1/4-inch TS Instrument Input (IN)
• Sortida: 1/4-inch TS Output (OUT), XLR Balanced Output
• Font d'alimentació: DC 9V (Center Negative)
• Dimensions: Aproximadament 262 mm (llargada) x 64 mm (amplada) x 45 mm (alçada)
• Pes: Aproximadament 0.8 kg
• Origen: Xina continental

7. Consells d'usuari

• Experiment with Order: While the internal chain is fixed, experiment with the order of other pedals you might use before or after the QCE-20 to discover new tonal possibilities.
• Acoustic Enhancement: For acoustic guitars, the Preamp and Reverb modules are particularly effective in adding warmth, presence, and space to your sound. Don't forget to try the CAB SIM for a more 'miked amp' feel.
• Sortida equilibrada: Utilize the XLR OUT for direct connection to a PA system or recording interface. This provides a clean, balanced signal, minimizing noise over long cable runs.
• Subtle Compression: Start with low compression settings and gradually increase. Over-compression can sometimes stifle dynamics, especially for acoustic playing.
• Qualitat d'energia: Always use a high-quality, isolated power supply to avoid unwanted noise and ensure stable performance, especially in live settings.

8. Garantia i Suport

The Sonicake QCE-20 Combined Effector is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the official Sonicake website or your point of purchase for specific warranty terms and conditions, as these may vary by region.

For technical support, troubleshooting assistance, or warranty claims, please contact Sonicake customer service through their official channels. Keep your proof of purchase handy when contacting support.