Manual d'usuari del controlador sense fil ECHTPower Pro

Introducció

Gràcies per la compraasing the ECHTPower Wireless Pro Controller. This manual provides detailed instructions on how to set up, operate, and maintain your controller, ensuring an optimal gaming experience across multiple platforms including Nintendo Switch, iOS, Android, and PC. Please read this manual thoroughly before use and keep it for future reference.

Contingut del paquet

Si us plau, reviseu el paquet per assegurar-vos que hi ha tots els elements:

• Wireless Controller x 1
• Charging Cable (USB-C) x 1
• Manual d'instruccions x 1

Especificacions

Diagrama del producte

Familiarize yourself with the layout of your ECHTPower Wireless Pro Controller:

Figura 1: Frontal view of the ECHTPower Wireless Pro Controller.

Figura 2: Esquena view of the controller with MR/ML buttons and switches.

Disposició dels botons:

• Davant: Home, Turbo (+), Screen Capture (-), A/B/X/Y, Left Joystick/L3, Right Joystick/R3, D-pad, M Button.
• A dalt: R Button, L Button, Charging Indicator, Pairing Button, Type-C Charging Port, Channel LED.
• A baix: ZR Button, ZL Button, ML Button, MR Button, Vibration Switch, Light Switch Key.

Configuració i connexió

Initial Activation & Power Management:

• Ús inicial: Before first use, the controller must be charged using the provided USB-C data cable to activate it. Connect the controller to a power source (e.g., Switch dock or AC adapter).
• Encès: Press the Home button lightly.
• Apagar: Press the pairing button lightly.
• One-Tap Wake-Up: When connected to a Nintendo Switch, press the Home button to instantly wake your Switch from sleep mode.

Connection Methods for Various Devices:

The controller supports both wired and wireless connections across multiple platforms.

Note for Nintendo Switch Wired Connection: Ensure that the "Settings → Handle and Sensor → Pro Handle Wired Connection" function is enabled on your Switch console.

Instruccions de funcionament

Turbo Rapid Fire Function:

Supported buttons: A, B, X, Y, L, R, ZL, ZR, D-pad.

• Turbo manual: Hold the 'T' button, then press and hold one of the supported buttons for 3 seconds. The controller will vibrate once to activate manual rapid fire.
• Turbo automàtic: Hold the 'T' button, then press and hold the button already configured for manual rapid fire again for 3 seconds. The controller will vibrate once to activate automatic rapid fire.
• Desactiva Turbo: Hold the 'T' button, then press and hold the button configured for automatic rapid fire again for 3 seconds. The controller will vibrate once to disable the rapid fire function for that button.
• Esborra tots els paràmetres de Turbo: Press and hold the 'T' button for 3 seconds to clear rapid fire settings for all buttons.
• Ajust de velocitat: Rapid fire speed can be adjusted to fast, medium, or slow. The default is slow. Hold the 'T' button on the controller and simultaneously move the right joystick up or down to adjust the speed.

Macro Setting for Back Buttons (ML/MR):

Supported buttons for mapping: A, B, X, Y, L, R, ZL, ZR, L3, R3, D-PAD.

• Entrant al mode de programació: Press and hold the 'M' button for 2 seconds. The left and right 3D rings will slowly flash (requires LED effects to be enabled), indicating the controller has entered programming mode.
• Mapping a Button: While in programming mode, press the button you want to program (map). The left and right 3D rings will flash quickly.
• Programming Confirmation: Press either the 'ML' or 'MR' button. The left and right 3D rings will change from fast flashing to steady, indicating successful button programming.
• Nota: You can program up to 16 buttons. If no button is pressed for more than 1 minute, the controller will automatically exit programming mode.
• Clearing Settings: After holding the 'M' button for 2 seconds and seeing the left and right 3D rings flash slowly, press 'ML' or 'MR' to clear the programmed back button settings.

Light Adjustment (RGB Lighting):

Customize the 9-color RGB lighting effects on your controller.

• Canvi de modes: Press 'Light Key' + 'R3' to cycle between 3 modes: Steady, Breathing/Running Horse, and Rainbow.
• Ajust de color: Press 'Light Key' + 'L3'.
  • In Steady mode: Switch colors.
  • In Breathing/Running Horse mode: No effect.
  • In Rainbow mode: Pause the rainbow effect.
• Reset Lights to Default: Press the '+' and 'Turbo' buttons simultaneously for 3 seconds. The motor will vibrate briefly, and the lights will reset to their default settings.
• Turn On/Off Joystick Ring Lighting: Press and hold the lighting button for 10 seconds to turn off the 3D joystick ring lighting. Press and hold it again for 10 seconds to reactivate.

Ajust de vibració:

The controller features dual motors with adjustable vibration intensity.

• Ajustar la intensitat: After connecting the controller, hold the vibration button on the back of the controller while moving the left 3D joystick up or down to increase or decrease motor vibration intensity. The controller will provide 3 seconds of vibration feedback after adjustment.
• Nivells d'intensitat: Four intensity levels are available: 100% (Strong), 70% (Medium - default), 30% (Weak), and 0% (Off).
• Disable/Enable Vibration: Press and hold the vibration switch for 10 seconds to disable the vibration function of both motors. Press and hold the vibration switch again for 10 seconds to re-enable the vibration function.

Gestió de la bateria

Càrrega:

• Connect the controller to an adapter using the provided USB-C data cable.
• The orange charging indicator will remain lit while charging.
• Once fully charged, the orange charging indicator will turn off.
• A full charge takes approximately 2.5 hours and provides 10-16 hours of usage time.

Indicador de bateria baixa:

When the battery is low, the light of the current channel will flash quickly as a reminder to charge the controller.

Mode d'espera:

• Manual Standby: When the controller is powered on, short press the "Pairing" button to enter standby mode.
• Automatic Standby (Pairing): If the controller is in pairing mode and fails to pair after 60 seconds, it will automatically enter standby mode.
• Automatic Standby (Inactivity): When the controller is connected to a console but remains inactive for 15 minutes, it will automatically enter standby mode.

Manteniment

• Mantingueu el controlador net netejant-lo amb un drap suau i sec.
• Avoid exposing the controller to liquids, excessive dust, or extreme temperatures.
• Guardeu el controlador en un lloc fresc i sec quan no l'utilitzeu.
• Do not attempt to disassemble or repair the controller yourself, as this may void the warranty and cause damage.

Resolució de problemes

• Controller Malfunction/Unresponsive: If the controller malfunctions or becomes unresponsive, you can reset it by pressing and holding the "HOME" button for 10 seconds.
• Problemes de connexió: Ensure the controller is fully charged. For wireless connections, verify the correct pairing combination for your device (refer to the "Connection Methods" table). For wired Switch connections, confirm "Pro Handle Wired Connection" is enabled in Switch settings.
• Drift Issues: The controller features Hall Effect Joysticks designed to prevent drift. If you experience any unusual input, try resetting the controller.
• Interference (FCC): If the equipment causes harmful interference to radio or television reception, try the following: reorient or relocate the receiving antenna, increase the separation between the equipment and receiver, connect the equipment into an outlet on a circuit different from that to which the receiver is connected, or consult the dealer/technician.

Consells per a l'usuari

• Experiment with the different RGB lighting modes and colors to personalize your gaming setup.
• Utilize the programmable back buttons (ML/MR) for frequently used in-game actions or complex combos to gain a competitive edge.
• Adjust the vibration intensity to your preference for a more immersive or less distracting gaming experience.
• Remember to enable "Pro Handle Wired Connection" in your Nintendo Switch settings for optimal wired performance.

Precaucions de seguretat

• Do not expose the controller to liquid.
• No desmunteu el controlador.
• Avoid dropping the controller.
• Avoid exposing the controller to extremely high or low temperatures.
• Dispose of the product and rechargeable battery responsibly at an appropriate collection point for recycling, in accordance with local regulations. Do not dispose of with household waste.

Garantia i suport

This product comes with a 12-month warranty for worry-free gaming.

For technical support, warranty claims, or any inquiries, please contact ECHTPower customer service:

• Correu electrònic: servei@echtpower.com
• Weblloc: www.echtpower.com
• Telèfon: 0755-21010839

Fabricant: Shenzhen Mike Morgen Technology Co., Ltd.

Address: Room 302, 3rd Floor, Building 5, Zone C, Jinxiu Huacheng Science and Technology Park, No. 36 Xiangjiaotang Second Road, Xiangjiaotang Community, Bantian Street, Longgang District, Shenzhen.

A detailed user manual in PDF format is also available for download on the manufacturer's weblloc.

Informació normativa

Declaration of Conformity (CE):

Model: ES01

The product conforms to EC standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020+A11:2020; EN 50663:2017, EN 62479:2010; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

El text complet de la Declaració de compliment de la UE es pot trobar a: www.echtpower.com

Declaració UKCA:

The product conforms to UK standards for radio interference. Shenzhen Mike Morgen Technology Co., Ltd. declares that the ES01 radio equipment conforms to Directive EN IEC 62368-1:2020; BS EN 50663:2017, BS EN 62479:2020; ETSI EN 301 489-1 V2.2.3(2019-11); ETSI EN 301 489-17 V3.2.4(2020-09); ETSI EN 300 328 V2.2.2(2019-07).

El text complet de la Declaració de Conformitat de la UKCA es pot trobar a: www.echtpower.com

Declaració de la FCC:

Aquest dispositiu compleix la part 15 de les normes de la FCC. El funcionament està subjecte a les dues condicions següents: (1) Aquest dispositiu no pot causar interferències perjudicials i (2) Aquest dispositiu ha d'acceptar qualsevol interferència rebuda, incloses les interferències que puguin provocar un funcionament no desitjat.

Avís de la FCC: Qualsevol canvi o modificació no aprovat expressament per la part responsable del compliment podria anul·lar l'autoritat de l'usuari per fer servir l'equip.

Nota: Aquest equip s'ha provat i s'ha comprovat que compleix els límits per a un dispositiu digital de classe B, d'acord amb la part 15 de les normes de la FCC. Aquests límits estan dissenyats per proporcionar una protecció raonable contra interferències nocives en una instal·lació residencial. Aquest equip genera usos i pot irradiar energia de radiofreqüència i, si no s'instal·la i s'utilitza d'acord amb les instruccions, pot provocar interferències perjudicials a les comunicacions de ràdio. Tanmateix, no hi ha cap garantia que no es produeixin interferències en una instal·lació concreta. Si aquest equip provoca interferències perjudicials a la recepció de ràdio o televisió, cosa que es pot determinar apagant i encenent l'equip, es recomana a l'usuari que intenti corregir la interferència mitjançant una o més de les mesures següents:

• Reorienta o reubica l'antena receptora.
• Augmentar la separació entre l'equip i el receptor.
• Connecteu l'equip a una presa d'un circuit diferent d'aquell al qual està connectat el receptor.
• Consulteu el distribuïdor o un tècnic de ràdio/TV amb experiència per obtenir ajuda.

S'ha avaluat que el dispositiu compleix els requisits generals d'exposició a RF. El dispositiu es pot utilitzar en condicions d'exposició portàtil sense restriccions.

Identificador FCC: 2A88F-ES01