Manual d'usuari del miner de Bitcoin amb refrigeració hidràulica Bitmain Antminer U3S23Hyd.

1. Introducció

The Bitmain Antminer U3S23Hyd. is a high-performance Bitcoin miner designed for efficient cryptocurrency mining. This unit features advanced hydro cooling technology to maintain optimal operating temperatures and ensure stable performance. This manual provides essential information for the safe and effective setup, operation, and maintenance of your Antminer U3S23Hyd.

2. Especificacions

The following table details the technical specifications of the Antminer U3S23Hyd.:

3. Instruccions de configuració

Proper setup is crucial for the performance and longevity of your hydro-cooled miner. Ensure all components are handled with care.

1. Desembalatge: Carefully remove the miner from its packaging. Inspect for any visible damage during transit. Keep all packaging materials for potential future transport or warranty claims.
2. Col·locació física: Place the miner in a stable, level environment with adequate space for air circulation around the unit, even though it is hydro-cooled. Ensure the location is free from excessive dust and humidity.
3. Cooling System Connection:
   • Connect the coolant inlet and outlet hoses from your external hydro cooling system to the corresponding ports on the Antminer U3S23Hyd. Ensure connections are secure and leak-free.
   • Fill the cooling system with the recommended working coolant (Antifreeze, Pure water, or Deionized water) ensuring the pH value is within the specified range (refer to Specifications).
   • Bleed any air from the cooling system according to your external cooling unit's instructions to ensure optimal coolant flow and pressure (8.0-10.0 L/min flow, ≤3.5 bar pressure).
4. Connexió d'alimentació: Connect the miner to a suitable power supply using the provided power cables. The miner requires a 380-415V power source. Ensure your electrical infrastructure can support the 11020W power consumption. Use appropriate circuit breakers and wiring.
5. Connexió de xarxa: Connect an Ethernet cable from your router or network switch to the Ethernet port on the miner. Ensure a stable internet connection for mining operations.
6. Configuració inicial: Power on the miner. Access the miner's web interface via its IP address (usually found using an IP scanner tool on your network). Configure your mining pool settings, worker name, and password as required.

4. Instruccions de funcionament

Once set up, operating the Antminer U3S23Hyd. involves monitoring and occasional adjustments.

1. Encès: After all connections are secure, switch on the power supply to the miner. The miner will initiate its boot sequence.
2. Seguiment: Regularly access the miner's web interface to monitor its status. Key metrics to observe include:
   • Hashrate: Ensure it is close to the specified 1160TH.
   • Temperatura: Monitor the operating temperature, which should ideally be within the 20-50 °C range.
   • Consum d'energia: Verify it is consistent with the 11020W specification.
   • Coolant Flow/Pressure: Ensure the hydro cooling system is functioning correctly.
3. Apagat: To safely shut down the miner, first stop mining operations through the web interface if possible, then switch off the power supply.

5. Manteniment

Regular maintenance is essential for optimal performance and longevity, especially for hydro-cooled systems.

• Neteja exterior: Periodically clean the exterior of the miner to prevent dust buildup, which can hinder heat dissipation and affect components. Use a soft, dry cloth.
• Coolant System Check:
  • Nivell de refrigerant: Check the coolant reservoir level regularly and top up as needed.
  • Qualitat del refrigerant: Monitor the coolant's pH value and clarity. Replace coolant according to the manufacturer's recommendations for your specific cooling fluid to prevent corrosion and buildup.
  • Inspecció de fuites: Regularly inspect all hoses and connections for any signs of leaks. Address any leaks immediately to prevent damage to the miner or surrounding equipment.
  • Pump/Radiator Maintenance: Follow the maintenance schedule for your external cooling pump and radiator, including cleaning fins and checking pump operation.
• Actualitzacions de firmware: Consulta el Bitmain oficial website periodically for firmware updates. Apply updates as recommended to improve performance, stability, or security.

6. Solució De Problemes

Aquesta secció ofereix solucions a problemes comuns que podeu trobar.

• Miner Does Not Power On:
  • Comproveu totes les connexions del cable d'alimentació.
  • Verify the power supply unit (PSU) is functioning correctly and receiving power.
  • Assegureu-vos que l'interruptor automàtic no s'hagi saltat.
• Low Hashrate or No Hashrate:
  • Check network connectivity; ensure the miner can access the internet and mining pool.
  • Verify mining pool settings (URL, worker name, password) are correct in the web interfície.
  • Check for high temperatures; overheating can cause performance throttling.
  • Inspect the cooling system for proper coolant flow and pressure.
• Sobreescalfament:
  • Ensure the hydro cooling system is operating correctly, with adequate coolant flow and pressure.
  • Check coolant levels and quality.
  • Verify that the ambient temperature is within the recommended operating range (20-50 °C).
  • Ensure there are no blockages in the coolant lines or radiator.
• Problemes de connexió de xarxa:
  • Comproveu la connexió del cable Ethernet.
  • Restart your router/switch.
  • Verify the miner's IP address and network settings.
• Error Lights/Indicators: Refer to the miner's specific LED indicators (if any) for diagnostic information. Consult the manufacturer's online resources for detailed explanations of error codes.

7. Consells d'usuari

While no specific user tips were provided, general advice for high-performance miners includes:

• Entorn estable: Maintain a consistent and clean environment for your miner to minimize dust and temperature fluctuations.
• Dedicated Power Circuit: Due to high power consumption, it is highly recommended to use a dedicated electrical circuit for your miner to prevent overloading.
• Programari de monitorització: Utilize third-party monitoring software or the miner's built-in interface to keep a close eye on performance and health metrics.

8. Garantia i assistència

For information regarding the purchase warranty, please contact your seller directly. Warranty terms and conditions can vary based on the point of purchase and region. It is recommended to retain your proof of purchase for any warranty claims.

For technical support, firmware downloads, and further assistance, please refer to the official Bitmain weblloc web o poseu-vos en contacte amb el venedor del producte.