Yottamaster 2-Bay SATA SSD/HDD External Enclosure User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your Yottamaster 2-Bay SATA SSD/HDD External Enclosure. This device is designed for self-media data storage, offering high-speed data transfer and multiple RAID modes for enhanced data management and security. It supports both 2.5-inch and 3.5-inch SATA SSDs and HDDs.

2. Contingut del paquet

Si us plau, comproveu el contingut del paquet en desembalar-lo. Si falta algun article o hi ha algun malmès, poseu-vos en contacte amb el servei d'atenció al client.

• Hard disk array cabinet (enclosure) x1
• Caixa d’embalatge
• Base antilliscant
• Adaptador de corrent
• Cargols
• Data cable (different versions may include USB-A to USB-C or USB-C to USB-C)
• Tornavís
• Manual d'instruccions (aquest document)
• Accessories packaging box

3. Guia de configuració

3.1 Instal·lació del disc dur

Follow these steps to install your 2.5-inch or 3.5-inch SATA SSD/HDD into the enclosure:

1. Pas 1: Unscrew the screws on the enclosure and gently open the compartment door.
2. Pas 2: Remove the hard drive tray. Place your 2.5-inch or 3.5-inch hard disk into the tray and secure it with the provided screws.
3. Pas 3: Push the loaded tray back into the hard disk cabinet until it clicks into place, then close the compartment door.

3.2 Potència i connectivitat

Connect the enclosure to your computer and power source:

• Connect the power adapter to the enclosure's power input and then to a wall outlet. Ensure the correct power adapter (10W or 48W depending on your model) is used.
• Connect the data cable (USB-A to USB-C or USB-C to USB-C) from the enclosure's USB port to an available USB port on your computer.

3.3 Compatibilitat del sistema

The Yottamaster enclosure is plug-and-play and does not require additional drivers for most operating systems. It is compatible with:

• Windows (11/10/8/7/XP)
• Linux
• Mac OS

4. Instruccions de funcionament

4.1 RAID Modes

The enclosure supports various RAID modes to suit your data storage needs. You can configure these modes using the physical keys or dedicated software (if applicable to your model).

4.2 Transferència de dades

The enclosure supports high-speed data transmission, with models offering up to 10Gbps (USB 3.1 Gen2) or 5Gbps (USB 3.0) depending on the specific model. This allows for quick transfer of large files.

4.3 Intelligent Sleep Function

To conserve energy and extend the lifespan of your hard drives, the enclosure features an intelligent sleep mode. It will automatically enter sleep mode after 10 minutes of no data interaction.

4.4 LED Indicator and Management

The enclosure is equipped with an LED indicator light to show its working status at a glance. It also offers two management modes: software control and physical keys for easy operation.

5. Manteniment

5.1 Dissipació de calor

The enclosure features an aviation alloy heat dissipation shell with front and rear hollow meteor heat dissipation holes. This design increases air circulation for rapid and efficient heat dissipation, ensuring stable performance and prolonging the life of your hard drives.

5.2 Neteja

To clean the enclosure, gently wipe the exterior with a soft, dry cloth. Avoid using liquid cleaners or abrasive materials that could damage the finish or internal components. Ensure the device is powered off and disconnected before cleaning.

6. Solució De Problemes

• Dispositiu no reconegut: Ensure all cables (power and data) are securely connected. Try a different USB port or cable. Verify that the hard drives are properly seated in their trays.
• Slow data transfer: Check if your computer's USB port supports the enclosure's speed (e.g., USB 3.1 Gen2 for 10Gbps). Ensure you are using the provided high-speed data cable.
• RAID configuration issues: Refer to the RAID mode table in Section 4.1 and ensure the correct number of disks are installed for your desired RAID mode. Consult the software manual for detailed RAID setup instructions if using software management.
• L'indicador LED no s'il·lumina: Confirm the power adapter is correctly connected and the power outlet is functional.

7. Especificacions

8. Consells d'usuari

• Single Disk Use: Yes, you can use the enclosure with a single hard disk. This typically operates in 'Clear RAID' mode, where each disk functions independently without RAID configuration.
• Triar el model adequat: Pay close attention to the model number (e.g., DR2RC3 vs. DR2RU3) and its corresponding features, especially regarding transmission rate (10Gbps vs. 5Gbps) and power adapter wattage, to ensure it meets your specific needs.
• Còpia de seguretat de dades: Even with RAID 1 for redundancy, always maintain external backups of critical data.
• Gestió de cables: Use the provided cables for optimal performance. Ensure cables are not kinked or strained.

9. Garantia i Suport

9.1 Informació de la garantia

This Yottamaster product comes with a 1-year warranty from the date of purchase. The warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.

9.2 Atenció al client

For technical assistance, warranty claims, or any questions regarding your Yottamaster enclosure, please contact the seller or Yottamaster customer support through their official channels. Please have your product model and purchase information ready when contacting support.