1. Introducció
This manual provides essential information for the installation, operation, maintenance, and troubleshooting of the KYJET Konica 512i Print Head Board BYHX KM1024 - 8heads Main Umc Kit. This board is designed for use with various large-format inkjet printers, including models from Minolta Bizhub c554e, Infiniti, Flora, Human, Allwin, Xuli, Gongzheng, and Twinjet. Please read this manual thoroughly before attempting any installation or maintenance procedures.
Nota: All images in this manual are taken from the actual product. If you require assistance or cannot find specific printer spare parts, please contact CLIPNT customer support.
2. Especificacions
| Característica | Detall |
|---|---|
| Nom de marca | CLIPNT |
| Número de model | BYHX 8 heads board (KM1024) |
| Tipus | Tauler de capçalera |
| Condició | Segona mà |
| Suitable Head | Konica 1024 head |
| Suitable Printer Models | Minolta Bizhub c554e, Infiniti, Flora, Human, Allwin, Xuli, Gongzheng, Twinjet |
| Voltage | 110 V, 220 V |
| Substància química molt preocupant | Cap |
| Origen | Xina continental |
3. Guia d'instal·lació
Installing the BYHX KM1024 8-head print head board requires careful handling and technical expertise. It is recommended that installation be performed by a qualified technician to avoid damage to the board or the printer.
3.1 Precaucions de seguretat
- Always power off and unplug the printer from the main power supply before beginning any installation or maintenance.
- Wear anti-static gloves and use an anti-static mat to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
- Avoid touching the gold contacts or components on the board directly with bare hands.
- Ensure the work area is clean, dry, and well-lit.
3.2 Component acabatview
Familiarize yourself with the board's layout and connectors before installation.
Figura 1: Part superior inclinada view of the BYHX KM1024 8-head print head board, highlighting connectors and integrated circuits.
Figura 2: Primer pla view of the board, showing the model identification "BYHX KM1024 8Head_Gray_V2_1 20150317" and various electronic components.
3.3 Passos d'instal·lació (generals)
- **Access the Printer's Main Board Area:** Refer to your specific printer's service manual for instructions on how to safely open the printer and access the main control board where the print head board is located.
- **Disconnect Old Board (if applicable):** Carefully disconnect all ribbon cables, power cables, and data cables from the existing print head board. Note their orientation and connection points for reassembly.
- **Remove Old Board:** Unscrew and remove the old print head board from its mounting points.
- **Install New Board:** Align the new BYHX KM1024 board with the mounting points and secure it with screws. Do not overtighten.
- **Connect Cables:** Reconnect all ribbon cables, power cables, and data cables to their corresponding ports on the new board. Ensure all connections are firm and correctly oriented. Pay close attention to the "J901", "J1001", "J1101", "J1201" connectors for print heads, and power inputs like "HEAT1", "HEAT2", "HEAT3", "HEAT4" as seen in the product images.
- **Verify Connections:** Double-check all connections to ensure they are secure and correctly seated.
- **Close Printer:** Carefully reassemble the printer's covers and panels.
Figura 3: superior view of the board, illustrating the layout of print head connectors and other interfaces.
Figura 4: A baix view of the board, showing the intricate circuitry.
4. Funcionament
The BYHX KM1024 8-head print head board functions as a critical component within your inkjet printer's control system. It manages the data flow and power supply to the Konica 1024 print heads, enabling precise ink ejection.
4.1 Engegada inicial
- After installation, plug the printer back into the power supply.
- Turn on the printer. Observe the printer's startup sequence.
- The printer's control panel or software should recognize the new print head board. If any error messages appear, refer to the Troubleshooting section or your printer's specific manual.
4.2 Configuració del programari
Depending on your printer model and software, you may need to perform calibration or configuration steps to optimize print quality with the new board. Consult your printer's software manual for detailed instructions on:
- Print head alignment
- Bi-directional adjustments
- Ink calibration
- Firmware updates (if recommended by the printer manufacturer)
Vídeo 1: Una projecció de vídeo de 27 segonsasing the BYHX KM1024 8-head print head board from various angles, demonstrating its physical characteristics.
5. Manteniment
Proper maintenance can extend the lifespan of your print head board and ensure consistent printer performance.
5.1 Atenció general
- **Keep Clean:** Regularly clean the area around the print head board within the printer to prevent dust and ink mist accumulation. Use a soft, lint-free cloth.
- **Avoid Moisture:** Ensure the printer environment is dry and free from excessive humidity, which can damage electronic components.
- **Static Prevention:** Continue to observe anti-static precautions when handling or working near the board.
5.2 Connector Inspection
Periodically inspect all cable connections to the board for looseness or corrosion. Re-seat any loose cables firmly.
6. Solució De Problemes
This section provides general guidance for common issues. For specific printer errors, consult your printer's service manual.
6.1 Problemes comuns i solucions
| Problema | Causa possible | Solució |
|---|---|---|
| Printer does not power on after board installation. | Incorrect power connection, short circuit, or damaged board. |
|
| Printer displays "Print Head Error" or similar message. | Loose ribbon cables, incompatible print heads, or faulty board. |
|
| Poor print quality (streaks, missing nozzles). | Print head issues, ink supply problems, or data signal issues from the board. |
|
7. Consells d'usuari
- **Comprovació de compatibilitat:** Abans de la compraasing or installing, always verify that the BYHX KM1024 8-head board is compatible with your specific printer model and print heads (Konica 1024). While models like Allwin, Xuli, Human, Gongzheng, and Twinjet are listed, confirm for your exact machine.
- **New vs. Remanufactured:** This product is listed as "second hand". Be aware of this when considering its expected lifespan and performance compared to a brand-new component.
- **Professional Installation:** Due to the complexity and sensitivity of printer electronics, professional installation is highly recommended to prevent damage and ensure proper functionality.
8. Garantia i Suport
For specific warranty information, please refer to the terms and conditions provided at the time of purchase from CLIPNT. For technical support or inquiries regarding printer spare parts, please contact CLIPNT customer service directly. They will be able to assist you with product-specific questions and troubleshooting.
