1. Introducció
The GEYA GPS6-VAS Adjustable Voltage/Current Protector is a sophisticated device designed to safeguard electrical circuits and connected equipment from damage due to overvoltage, minvartage, and overcurrent conditions. It is suitable for both home and industrial applications, offering reliable protection and adjustable parameters to meet specific operational requirements. This manual provides essential information for the safe installation, operation, and maintenance of your GPS6-VAS protector.
2. Informació de seguretat
ADVERTÈNCIA: Perill de descàrrega elèctrica. La instal·lació i el manteniment només els ha de dur a terme personal qualificat.
- Desconnecteu sempre l'alimentació del circuit abans d'instal·lar, cablejar o realitzar qualsevol manteniment al dispositiu.
- Assegureu-vos que totes les connexions del cablejat siguin segures i que compleixin els codis i les normes elèctriques locals.
- Do not operate the device if it appears damaged or malfunctions.
- Mantingueu el dispositiu allunyat de la humitat i de les temperatures extremes.
- Verify the rated voltage and current of your system match the device's specifications.
3. Producte acabatview
The GPS6-VAS protector features a clear digital display and intuitive controls for easy monitoring and adjustment of protection parameters.
3.1 Panell frontal i indicadors
The front panel includes a digital display, control buttons (SET, Up, Down, Power/Reset), and indicator lights for various statuses.
Indicadors:
- >V: Overvoltage Indicador
- <V: Undervoltage Indicador
- >A: Overcurrent Indicator
- POTÈNCIA: Normal Working Indicator (Green for normal, Red for fault due to voltage/actual)
3.2 Menu Selection and Controls
The device features a menu-driven interface for setting various protection parameters.
Botons de control:
- SET: Selecció de menú
- Up (▲): Digit/Up adjustment
- Down (▼): Digit/Down adjustment
- Power/Reset (⏻): ON/OFF or Reset
4. Especificacions
Below are the technical specifications for the GPS6-VAS Adjustable Voltage/Current Protector:
| Paràmetre | Valor |
|---|---|
| Supply Terminals | N, L |
| Vol. d'oferta nominaltage | AC 220V; DC 85-300V |
| Freqüència nominal | 40/50/60 / 70Hz |
| Overvoltage (>V) Setting Range | AC130-300V; DC130-300V |
| Undervoltage (<V) Setting Range | AC80-210V; DC85-210V |
| Voltage Histèresi | 5V |
| Overvoltage Retard del viatge | 0.5 s |
| Voltage Precisió | <1% |
| Max. Operating Phase Voltage | 350 V |
| Màx. Corrent de funcionament | 40A/63A/80A/100A (model dependent) |
| Altitud | ≤2000m |
| Humitat relativa permesa | ≤95% a 40 ℃ (sense condensació) |
| Temperatura ambient | -25 ℃ ~ + 55 ℃ |
4.1 Dimensions del producte
The device measures approximately 86mm (Height) x 38mm (Width) x 67.5mm (Depth).
5. Configuració i instal·lació
The GPS6-VAS protector is designed for DIN rail mounting. Follow the wiring diagram carefully.
5.1 Esquema de cablejat
Connect the device according to the following diagram. Ensure proper connection of the Neutral (N) and Live (L) lines, and connect the load to the output terminals.
Passos de cablejat:
- Mount the GPS6-VAS protector onto a standard DIN rail.
- Connect the incoming Neutral (N) wire to the 'N' input terminal (top left).
- Connect the incoming Live (L) wire to the 'L' input terminal (top right).
- Connect the Neutral (N) output wire from the protector to the load's Neutral terminal.
- Connect the Live (L) output wire from the protector to the load's Live terminal.
- Assegureu-vos que totes les connexions estiguin estretes i segures.
- It is recommended to install a circuit breaker upstream of the protector for additional safety and ease of maintenance.
6. Instruccions de funcionament
The GPS6-VAS allows for precise adjustment of various protection parameters. Use the SET, Up (▲), and Down (▼) buttons to navigate and modify settings.
6.1 Function Settings (P-1 to P-19)
Press the 'SET' button to enter the parameter setting mode. Use 'Up' and 'Down' to select the parameter (P-X) and then press 'SET' again to modify its value. Use 'Up' and 'Down' to change the value, and 'SET' to confirm and move to the next digit or exit.
- P-1: Power-on delay time (1s-999s) - Time delay before power is supplied after device startup.
- P-2: Recovery delay (1s-999s) - Time delay before power is restored after a fault condition clears.
- P-3: Overvoltage Configuració (130V-300V) - Upper voltage límit.
- P-4: Overvoltage valor de recuperació (125V-295V) - Voltage level at which the device will attempt to recover after an overvoltage viatge.
- P-5: Undervoltage Configuració (80V-210V) - Lower voltage límit.
- P-6: Undervoltage valor de recuperació (85V-215V) - Voltage level at which the device will attempt to recover after an undervoltage viatge.
- P-7: Voltagel retard del viatge (0.1s-10s) - Time delay before tripping on voltage falles.
- P-8: Voltage Correcció (-10%~+10%V) - Allows for fine-tuning of voltage lectures.
- P-9: Overcurrent Setting (1A-40A, 1A-63A, 1A-80A) - Upper current limit (specific range depends on model variant).
- P-10: Overcurrent trip delay (0.1s-10s) - Time delay before tripping on overcurrent faults.
- P-11: Overcurrent counter (0-20 times) - Number of overcurrent trips before locking out.
- P-12: Current adjustment (-10%~+10%A) - Allows for fine-tuning of current readings.
- P-13: Frequency adjustment (-2.5%~+2.5%Hz) - Allows for fine-tuning of frequency readings.
- P-14: Quick power down protection (on/off) - Enables or disables rapid power-down protection.
- P-15: Three models (1:Standard, 2:Manual, 3:Automatic) - Selects the operating mode.
- Mode 1 (Standard): All parameters P1-P19 are active.
- Mode 2 (Manual): Press Up or Down to display Voltage (>U), Power (-P-), Current (-A-), Frequency (-H-).
- Mode 3 (Automatic): Automatically cycles through displaying Voltage (>U), Power (-P-), Current (-A-), Frequency (-H-).
- P-16: Automatic reset (on/off) - Enables or disables automatic reset after a fault.
- P-17: Switch mode (on/off) - Controls the switching behavior.
- P-18: Energy saving mode (on/off) - Enables or disables energy-saving features.
- P-19: Password setting (000-999) - Sets a password to protect settings. The initial password is 112. To unlock, set to 112. Change the lock parameter after the initial password is changed.
Nota: When operating under DC power, the current display will be inactive; only voltages mostrarà e.
7. Manteniment
The GEYA GPS6-VAS protector requires minimal maintenance. Regular inspection can help ensure its longevity and reliable operation.
- Neteja: Netegeu periòdicament l'exterior del dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Inspecció: Regularly check for any signs of physical damage, loose connections, or discoloration of terminals.
- Condicions ambientals: Assegureu-vos que l'entorn de funcionament es mantingui dins dels rangs de temperatura i humitat especificats per evitar danys.
Always disconnect power before performing any cleaning or inspection.
8. Solució De Problemes
If you encounter issues with your GPS6-VAS protector, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s'encén | No input power; incorrect wiring | Check power supply to N and L terminals. Verify wiring connections. |
| Device trips unexpectedly | Voltage/current outside set limits; incorrect settings | Check actual line voltage/current. Review and adjust P-3, P-5, P-9 settings. Check trip delays (P-7, P-10). |
| Display is blank or off | No power; Energy Saving Mode (P-18) active | Ensure power is supplied. Check P-18 setting and disable if necessary. |
| No es pot canviar la configuració | Protecció amb contrasenya activa | Enter the correct password (default 112) in P-19 to unlock settings. |
| Vol inexactetaglectures de corrent elèctric | Cal calibratge | Use P-8 (Voltage Correction) or P-12 (Current Adjustment) to fine-tune readings against a known accurate meter. |
9. Garantia i Suport
For detailed warranty information, specific technical support, or further inquiries, please refer to the official product documentation or contact GEYA customer service.
This product complies with relevant EU harmonization legislation, as indicated by its EU Declaration of Conformity.
A comprehensive user manual in PDF format is available for download. You can access it aquí per obtenir instruccions i especificacions més detallades.
