1. Introducció i finalview
The GLEDOPTO Pro Max ZigBee 3.0 LED Controller is a versatile 5-in-1 smart LED controller designed for various LED strip lighting applications. It supports RGBCCT, RGBW, RGB, CCT, and Dimmer modes, offering comprehensive control over your lighting environment. Operating on the Zigbee 3.0 protocol, this controller ensures smooth and stable connectivity with a wide range of smart home platforms and voice assistants, including Amazon Alexa, Yandex Alice, and Home Assistant, when connected via a compatible Zigbee-certified hub.
Key features include a user-replaceable 20A pluggable fuse for enhanced safety, wide voltage support (DC 5-24V) for PWM dimmable LED strips, and multiple power input options for flexible installation. The innovative Mix Mode allows for precise blending of color and white light, adjustable across 16 million hues and a color temperature range of 2700K–6500K.
The GLEDOPTO Pro Max controller integrates seamlessly with various smart home ecosystems.
2. Informació de seguretat
- This Zigbee controller requires a standard Zigbee gateway (e.g., Philips Hue, Amazon Echo Plus, Homey, Conbee II, SmartThings) for full smart home integration.
- If you do not have a Zigbee gateway, you can use a GLEDOPTO 2.4G RF remote control or wall switch to operate the controller.
- This device is only compatible with the GLEDOPTO 2.4G RF remote control and is not compatible with other remote controls.
- The controller includes a 20A pluggable fuse for protection against overcurrent and short circuits. Ensure proper wiring to prevent damage.
- Do not use with addressable RGBIC LED strips. This controller is designed for PWM dimming analog LED strip lights only.
Important notes regarding gateway and remote control compatibility.
3. Contingut del paquet
Si us plau, reviseu el paquet acuradament per assegurar-vos que tots els articles hi són i no estan danyats.
- 1 x ZigBee 3.0 Five in One LED Controller Pro Max (Model: GL-C-601P-1)
- 1 x Manual d'usuari
- 1 x 20A Pluggable Fuse (pre-installed or spare)
- 1 x 3cm Sticker
Representació visual dels elements inclosos al paquet.
4. Especificacions
| Característica | Especificació |
|---|---|
| Model núm. | GL-C-601P-1 |
| Entrada Voltage | DC 5-24V |
| Corrent total de sortida | 15 A màx |
| Corrent de sortida/Canal | 10 A màx |
| Tipus C Voltage | 5V |
| Corrent tipus C | 3 A màx |
| Wattage | 360W |
| Màx. Potència de càrrega | 360W |
| Tarifa de l'IP | IP20 |
| Material | PC ignífug |
| Pes net (NW) | 70.8 g |
| Pes brut (GW) | 81.6 g |
| Dimensions (L*W*H) | 129 x 50 x 23 mm |
| Temperatura de funcionament | -20 °C a 45 °C |
| Mode de connexió | ZigBee 3.0 |
| Distància Remota | 30 m |
| Certificacions | CE, EMC, FCC, LVD, ROHS |
| Supported Strip Type | PWM Dimming Analog LED Strip Light (Not for Addressable RGBIC LED Strip) |
Detailed product specifications and a view del controlador.
Dimensions and key components of the LED controller.
5. Configuració i instal·lació
5.1 Power Input Methods
The controller offers three convenient ways to connect power:
- V+/V- Power Interface: Standard screw terminals for direct wire connection.
- 5.5x2.1mm DC Socket: For use with a standard DC power adapter.
- Interfície tipus C: For 5V, 3A Max power input (e.g., from a USB wall adapter, not for PC USB).
Choose one suitable connection method for power input.
5.2 Esquemes de cablejat
The controller features redesigned WAGO push-in connectors for fast and secure screwless wiring. Ensure correct polarity and channel connections for your specific LED strip type.
Detailed wiring instructions for different LED strip types (RGB CCT, RGBW, RGB, CCT, Dimmer).
6. Instruccions de funcionament
6.1 Funcions clau
Acabatview of the controller's buttons and indicator light.
- Botó de restabliment:
- Short press: Switches the frequency.
- Long press (5 seconds): Resets the controller to factory settings.
- Opt Button:
- Short press: Switches the current device function (e.g., between RGB CCT, RGBW, RGB, CCT, Dimmer modes).
- Long press (5 seconds): Accesses power-on status settings.
- Polsador:
- Pressió curta: Encendre/apagar.
- Long press: Adjusts brightness (long press increases brightness, release and long press again decreases brightness).
- Llum indicadora: Displays different colors corresponding to the active mode.
6.2 Canvi de mode
The controller supports five different modes for various LED strip types. Short press the 'Opt' button to cycle through these modes:
- RGB CCT
- RGBW
- RGB
- CCT
- Dimmer
Switch between different LED strip control modes.
6.3 RGB + White Light Mix Mode
The innovative Mix Mode allows you to blend RGB colors with white light for truly custom ambiance. This can be fine-tuned via the app, voice commands, remote, or the tactile push switch.
- When the color loop in the app moves to the edge, only the RGB light turns on.
- When the color loop moves to the middle, both the RGB light and White light turn on together.
How to achieve mixed RGB and white light effects.
6.4 Funció de memòria d'apagada
The controller offers two optional power-off memory modes:
- Remember Last State: The lights will return to their state (on/off and brightness/color) before power failure.
- Activat per defecte: The lights will turn on by default when power is restored.
To switch between these modes, long press the 'Opt' key for more than 5 seconds. The indicator light will flash blue 3 times to confirm the change.
Configure how the controller behaves after a power interruption.
6.5 Paràmetres de freqüència
The controller allows you to adapt to different power supplies and reduce noise by adjusting the output frequency. Use a short press of the 'Reset' button to cycle through the frequencies.
| Freqüència | Flashes (Reset Button) |
|---|---|
| 600 Hz | 1 |
| 800 Hz | 2 |
| 1000 Hz | 3 |
| 2000 Hz | 4 |
| 4000 Hz | 5 |
| 8000 Hz | 6 |
Adjust the output frequency to optimize performance and reduce noise.
6.6 Mètodes de control
The GLEDOPTO Pro Max controller offers multiple ways to manage your lighting:
- Control de l’APP: Connect to a Zigbee gateway and use a compatible smart home app (e.g., Smart Life) to control colors, brightness, and color temperature.
- Control de veu: Integrate with voice assistants like Amazon Alexa or Yandex Alice through your Zigbee gateway for hands-free control.
- Control remot RF 2.4G: For direct control without a smart hub, pair with an optional GLEDOPTO 2.4G RF remote. This allows for multi-zone control (up to 8 zones) and scene activation.
Various methods for controlling your LED strip lights.
Multi-zone control capability with the GLEDOPTO 2.4G RF Remote Control.
7. Manteniment
The GLEDOPTO Pro Max LED Controller is designed for durability and requires minimal maintenance. To ensure optimal performance and longevity:
- Neteja: Gently wipe the controller with a dry, soft cloth to remove dust. Do not use liquid cleaners or solvents.
- Ventilació: Ensure the controller is installed in a location with adequate airflow to prevent overheating. The device features excellent heat dissipation hole design.
- Comprovació de fusibles: If the controller stops functioning, check the 20A pluggable fuse. Replace it with a fuse of the same rating if it is blown.
8. Solució De Problemes
- El controlador no respon:
- Comproveu les connexions d'alimentació i assegureu-vos que el volum d'entradatage està entre 5 i 24 V.
- Verify the 20A pluggable fuse.
- If using a Zigbee gateway, ensure the controller is properly paired and the gateway is online.
- If using a 2.4G RF remote, ensure it is a GLEDOPTO 2.4G RF remote and is correctly paired.
- Lights flickering or making noise:
- Adjust the frequency settings using a short press of the 'Reset' button to find an optimal setting for your power supply.
- Ensure the LED strip is compatible (PWM dimming analog, not RGBIC).
- Color o mode incorrecte:
- Short press the 'Opt' button to cycle through the 5 modes (RGBCCT, RGBW, RGB, CCT, Dimmer) and select the correct one for your LED strip.
- If using Mix Mode, check the app's color wheel position.
- Controller not pairing with Zigbee gateway:
- Ensure you are using a standard Zigbee 3.0 compatible gateway.
- Perform a factory reset on the controller by long pressing the 'Reset' button for 5 seconds.
- Initiate the pairing process on your Zigbee gateway and then put the controller into pairing mode (refer to gateway instructions).
9. Consells d'usuari
- Control flexible: For maximum flexibility, consider setting up both Zigbee gateway control (for smart home integration) and having a GLEDOPTO 2.4G RF remote handy for quick, direct adjustments without needing your phone or voice assistant.
- Personalized Ambiance: Experiment with the 'Mix Mode' to create unique lighting effects by blending RGB colors with different shades of white light. This allows for a broader range of moods and atmospheres.
- Power-Off Behavior: Customize the power-off memory function to suit your preference. If you prefer your lights to always turn on to a specific setting, configure it accordingly. If you want them to remember their last state, select that option.
- Optimitzar el rendiment: If you notice any flickering or humming from your LED strips, try adjusting the frequency settings using the 'Reset' button. Different frequencies can help mitigate noise with various power supplies.
10. Garantia i Suport
The GLEDOPTO Pro Max ZigBee 3.0 LED Controller comes with a 2 any de garantia for indoor products. For any questions, troubleshooting assistance, or further information, please contact our customer support team. We are committed to providing timely assistance.
Customer support is available to assist with any product-related inquiries.
