1. Producte acabatview
The TDA-08 series is a versatile rail-type weighing force transmitter and weight sensor signal amplifier designed for industrial applications. It integrates force measurement, weighing, display, and control functions into a single compact unit. This device is suitable for various weighing and force measurement systems, providing accurate signal amplification and processing.
Característiques clau
- Integrates force measurement, weighing, display, and control functions.
- Internal integrated switching power supply, operating voltagRang e: de 10 V a 30 V.
- Equipped with an analog filtering function for stable readings.
- Automatic error diagnosis for easy identification and resolution of issues.
- Features automatic zero tracking.
- Supports automatic zeroing upon power-up.
- Configurable zero range and filter intensity.
2. Informació de seguretat
Please read and understand all safety instructions before installation, operation, or maintenance of the TDA-08 series device. Failure to follow these instructions may result in injury or damage to the equipment.
- Assegureu-vos que la font d'alimentació voltage is within the specified range (10V-30V DC).
- All wiring should be performed by qualified personnel and in accordance with local electrical codes.
- Desconnecteu l'alimentació abans de fer qualsevol connexió o realitzar tasques de manteniment.
- Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
- Do not open the device enclosure unless specifically instructed to do so by a qualified technician.
3. Instal·lació i configuració
3.1 Desembalatge
Carefully remove the TDA-08 unit from its packaging. Inspect the device for any signs of physical damage. Retain the packaging for future transport or storage.
3.2 Muntatge
The TDA-08 series is designed for rail mounting. Securely attach the device to a standard DIN rail in a suitable enclosure, ensuring adequate ventilation and protection from environmental factors.
3.3 Cablejat
Refer to the terminal block labels on your specific TDA-08 model (TDA-08A, TDA-08B, or TDA-08C) for correct connections. Typical connections include:
- Entrada d'alimentació: Connect 10V-30V DC power to the designated power terminals (e.g., +V, -V, GND).
- Load Cell/Sensor Input: Connect the load cell or weight sensor to the input terminals (e.g., E+, E-, S+, S-). Ensure correct polarity.
- Sortida analògica: Connect to external control systems or displays via analog output terminals (e.g., OUT, AO).
- Digital Inputs/Outputs: If applicable, connect control signals to digital input (e.g., IN) and output (e.g., OUT1, OUT2, OUT3) terminals.
Always consult the detailed wiring diagram specific to your TDA-08 model and application. If unsure, seek assistance from a qualified electrician or system integrator.
3.4 Engegada inicial
After all connections are securely made, apply power to the device. The display should illuminate, and the device may perform an automatic zeroing sequence. Observe the display for any error messages or unexpected behavior.
4. Funcionament
The TDA-08 series features a digital display and control buttons for easy operation. Specific button functions may vary slightly between models (TDA-08A, TDA-08B, TDA-08C).
4.1 Mostra finalview
The digital display shows the current measured value (e.g., weight, force). Indicators (e.g., NET, PWAK, Kg, g, N, KN) provide additional status information.
4.2 Basic Weighing/Measurement
Once powered on and calibrated, the device will continuously display the measured value from the connected sensor. Place the item to be weighed or apply force to the sensor.
4.3 Reducció a zero
To set the current reading to zero (e.g., to tare a container), press the ZERO button. The device supports automatic zero tracking and power-up zeroing.
4.4 Calibració
Calibration is crucial for accurate measurements. To enter calibration mode, typically press and hold the SET/CALI button. Follow the on-screen prompts to perform a multi-point calibration using known weights or force standards. Refer to the specific model's detailed instructions for the exact calibration procedure.
4.5 Configuració de paràmetres
The device allows configuration of various parameters such as zero range, filter intensity, and output settings. Access the settings menu by pressing the SET/CALI button (or similar, depending on model). Use the navigation buttons (e.g., UP/DOWN arrows, SWITCH, OFTEN) to adjust values and confirm selections.
5. Manteniment
The TDA-08 series is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity and performance:
- Neteja: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
- Inspecció: Periodically inspect all wiring connections for tightness and signs of wear or corrosion.
- Medi ambient: Assegureu-vos que l'entorn de funcionament es mantingui dins dels rangs de temperatura i humitat especificats.
- Recalibració: Recalibrate the device periodically or if you suspect measurement inaccuracies.
6. Solució De Problemes
The TDA-08 series includes automatic error diagnosis to help identify and resolve common issues. If you encounter a problem, refer to the table below:
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc | Sense potència o vol incorrectetage. | Comproveu les connexions de la font d'alimentació i el volumtage (10V-30V CC). |
| Lectures inexactes | Needs calibration; sensor issue; environmental interference. | Perform calibration. Check sensor wiring and integrity. Ensure stable operating environment. |
| Display shows "OVER" or "UNDER" | Sensor overload/underload; incorrect range setting. | Ensure load is within sensor capacity. Check and adjust range settings if configurable. |
| Cap resposta dels botons | Device frozen; button malfunction. | Power cycle the device. If problem persists, contact support. |
| Lectures inestables | Electrical noise; mechanical vibration; filter intensity too low. | Check for sources of electrical interference. Reduce vibrations. Increase filter intensity in settings. |
7. Especificacions
| Característica | Especificació |
|---|---|
| Model | TDA-08 Series (TDA-08A, TDA-08B, TDA-08C) |
| Tipus Fix | Magnetic Fastener (for mounting) |
| Ús | Window (likely refers to display window) |
| Vol. Operatiutage | 10 V ~ 30 V CC |
| Filtering Function | Filtrat analògic |
| Diagnòstic d'errors | Automàtic |
| Seguiment zero | Automàtic |
| Power-up Zeroing | Automàtic |
| Paràmetres configurables | Zero range, filter intensity, etc. |
| Origen | Xina continental |
Dimensions i pes
- Device Dimensions (L x H x D): 88mm x 53mm x 59mm (including rail mount)
- Dimensions del paquet (L x A x A): 23 cm x 11 cm x 7 cm
- Pes del paquet: 0.8 kg
8. Consells d'usuari
While specific user tips from reviews or Q&A are not available, here are some general recommendations for optimal use:
- For critical applications, always verify calibration regularly.
- If experiencing signal noise, ensure proper grounding of the system and use shielded cables for sensor connections.
- Keep a record of your calibration dates and any parameter changes.
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model and serial number (if applicable) ready when contacting support.
