Introducció
Thank you for choosing the KT TF04 Color LCD Display Meter. This display is designed to provide essential riding information and control for your e-bike, offering a clear TFT screen and intuitive interface. This manual will guide you through the installation, operation, and maintenance of your new display.
Important Compatibility Note: This KT TF04 display is exclusively compatible with KT brand controllers. It will not function with controllers from other brands. Please ensure your e-bike controller is a KT brand before installation.
Image: The KT TF04 display shown alongside a compatible KT controller, highlighting the necessity of using a KT brand controller for proper function.
Configuració i instal·lació
Contingut del paquet
- KT-TF04 Display Unit
- Connection Cable (SM or WP plug type)
Passos d'instal·lació
- Muntatge de la pantalla: Securely attach the KT-TF04 display to your e-bike's handlebar. The display is designed for a standard handlebar grip size of Φ22.2mm.
- Connexió al controlador: Identify the correct connector type (SM or WP) on your display cable and connect it to the corresponding port on your KT brand controller. Ensure the connection is firm and secure.
- SM connector cable length: Approximately 180cm.
- WP connector cable length: Approximately 45cm.
- Gestió de cables: Route the cable safely along your e-bike frame, securing it with cable ties to prevent interference with moving parts or accidental damage.
Image: The KT TF04 display shown mounted on an e-bike handlebar, demonstrating typical installation.
Image: Illustration of the SM plug type and its approximate cable length of 180cm.
Instruccions de funcionament
Funcions de visualització
The KT-TF04 display provides comprehensive information at a glance:
- Velocitat: Velocitat actual de conducció.
- Interval: Single trip distance and accumulated total distance.
- Hora: Riding duration.
- Nivell PAS: Pedal Assist System level (typically 1-5 levels).
- Potència: Motor power output.
- Temperatura: Ambient or motor temperature.
- Voltage & Capacity: Real-time battery status.
Image: A close-up of the KT TF04 display screen, illustrating the various data points visible during operation.
Configuració dels paràmetres
The display allows you to adjust various parameters for your e-bike system:
- Set speed limits.
- Adjust PAS levels.
- Configure controller protection voltage i corrent.
- View historical data including speed, range, and riding time.
- Set a power-on password for security.
Image: A visual representation of the display's parameter setting interface, showing options for customization.
PAS Sensor Configuration
If you are using a KT-V12 or KT-D12 PAS sensor and experience issues, you may need to adjust a specific setting:
- Access the display's parameter settings.
- Estableix el paràmetre C1=7 for the PAS function to operate correctly.
Manteniment
To ensure the longevity and optimal performance of your KT TF04 display, follow these simple maintenance guidelines:
- Neteja: Utilitzeu un suau, damp cloth to wipe the display screen and body. Avoid abrasive cleaners or solvents that could damage the plastic or screen.
- Protecció: Keep the display away from direct sunlight for prolonged periods when not in use, and protect it from heavy rain or extreme temperatures.
- Connexions: Comproveu periòdicament totes les connexions dels cables per assegurar-vos que estiguin ben fixades i que no presentin corrosió ni danys.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Display does not power on or shows no data. | Incompatible controller, loose connection, power issue. | Ensure your controller is a KT brand. Check all cable connections for tightness. Verify battery power. |
| PAS (Pedal Assist System) is not working. | Incorrect PAS sensor setting for KT-V12/D12. | Access display settings and set parameter C1=7. |
| Inaccurate speed or distance readings. | Ajust incorrecte del diàmetre de la roda. | Adjust the wheel diameter setting in the display's parameters to match your e-bike's wheel size. |
Image: An important warning about controller compatibility and a specific setting (C1=7) for KT-V12 or KT-D12 PAS sensors.
Especificacions
| Característica | Detall |
|---|---|
| Model | KT-TF04 |
| Tipus | Color TFT LCD Display Meter |
| Voltage Compatibilitat | 24 V, 36 V, 48 V |
| Color | Negre |
| Pes | Aprox. 200 g |
| Mida de l'empunyadura | Φ22.2 mm |
| Cable Length (SM Plug) | Aprox. 180 cm |
| Cable Length (WP Plug) | Aprox. 45 cm |
| Material | Plàstic |
| Origen | Xina continental |
Dimensions
Image: Technical drawing illustrating the dimensions of the KT TF04 display, including width (24mm), height (61.5mm), and grip diameter (22.2mm).
Disseny compacte
Image: A sequence of images demonstrating the compact size of the KT TF04 display when held in a hand.
Consells per a l'usuari
- Always double-check the compatibility of your e-bike controller with the KT TF04 display before attempting installation.
- When adjusting settings, make small changes and test their effect before making further adjustments.
- Keep the display firmware updated if updates become available from the manufacturer, as this can improve performance and add features.
- Consider using a screen protector to prevent scratches and prolong the life of the display screen.
Garantia i Suport
Per a qualsevol assistència tècnica, resolució de problemes més enllà d'aquest manual o consultes sobre la garantia, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.
