Introducció
Thank you for choosing the SHARDOR HY-1430 Custom Mode Capacity Burr Coffee Grinder. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new coffee grinder. Please read it thoroughly before first use and keep it for future reference.
Figure 1: SHARDOR HY-1430 Burr Coffee Grinder
Especificacions
| Característica | Detall |
|---|---|
| Marca | SHADOR |
| Número de model | HY-1430 |
| Tipus | Commercial Burr Conical Coffee Grinder |
| Material | ABS + acer inoxidable |
| Capacity (Bean Hopper) | 400 g |
| Poder | 150 W |
| Voltage | US120V / EU220-240V |
| Pes net | 2.8 Kg |
| Mida del producte (L*W*H) | 135 x 250 x 465 mm |
| Funcions | Electronic Touch Control, LED Display, Easy Clean, Easy Operation, Built-in Electronic Scale |
| Garantia | 1 any |
| Servei postvenda | Free Spare Parts |
Configuració
- Desembalatge: Traieu amb cura tots els components de l'embalatge. Conserveu l'embalatge per a futurs emmagatzematges o transports.
- Col·locació: Place the grinder on a stable, flat, and dry surface. Ensure it is away from heat sources and moisture.
- Instal·lació de la tolva de mongetes: Ensure the 400g large bean hopper is securely placed on top of the grinder.
Figure 2: Large Bean Hopper
- Ajust de la finesa de la mòlta: The grinder features stainless steel conical burrs with a 57-level grind fineness dial selector. Rotate the dial to your desired fineness setting. "Fine" settings are typically for espresso, while "Coarse" settings are for French press.
Figure 3: Grind Fineness Dial Selector
- Connexió d'alimentació: Plug the grinder into a suitable electrical outlet (US120V or EU220-240V, depending on your model).
Instruccions de funcionament
1. Omplir la tolva de grans
- Obriu la tapa de la tremuja de mongetes.
- Pour whole roasted coffee beans into the hopper. The maximum capacity is 400g.
- Tanqueu bé la tapa de la tolva.
2. Selecting Grinding Method
The grinder supports two ways of collecting ground coffee:
- 90g Stainless Steel Cup: Place the included stainless steel cup under the grinding chute.
- 51/58mm Espresso Portafilter Holder: Attach your portafilter to the designated holder under the grinding chute.
Figure 4: Two Grinding Methods
3. Ús del tauler de control tàctil
The grinder features an Electronic Touch Control panel with an LED Display and a built-in electronic scale for accurate weight display.
Figura 5: Panell de control tàctil
Figure 6: Built-in Electronic Scale
- Encès/apagat: Toca la icona d'engegada (⏻) to turn the grinder on or off.
- Selecció del mode: The panel offers 3 modes:
- Single Cup (9 grams): Select this mode for a standard single serving.
- Two Cups (18 grams): Select this mode for a double serving.
- Mode personalitzat: Use the '+' and '-' buttons to adjust the desired amount of coffee powder. The LED display will show the selected weight in grams.
- Comença a triturar: After selecting the mode and desired amount, touch the start button (often indicated by a play symbol or similar) to begin grinding. The grinder will automatically stop once the selected weight is reached.
Manteniment i Neteja
Una neteja regular garanteix un rendiment òptim i allarga la vida útil del molinet.
- Desconnecteu abans de netejar: Always unplug the grinder from the power outlet before cleaning or performing any maintenance.
- Tremuja buida: Empty any remaining coffee beans from the hopper.
- Eliminar les rebaves: Carefully remove the upper burr. Refer to the diagram for proper removal.
Figure 7: Conical Burrs (for cleaning access)
- Clean Burrs and Chute: Use a brush (often included) to remove ground coffee particles from the burrs and the grinding chute. Do not use water on the burrs.
- Clean Hopper and Ground Coffee Container: The bean hopper and ground coffee container can be washed with warm, soapy water. Ensure they are completely dry before reassembling.
- Netejar l'exterior: Netegeu l'exterior del molinet amb anunciamp tela. No submergiu la unitat principal a l'aigua.
- Torneu a muntar: Reassemble all parts, ensuring the burrs are correctly seated and the hopper is locked in place.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El molinet no s'encén. | Not plugged in; power switch off; safety interlock not engaged. | Ensure the power cord is securely plugged into a working outlet. Check if the power button is pressed. Verify the bean hopper is correctly installed and locked, engaging the safety interlock. |
| Grinder runs but no coffee is dispensed. | Bean hopper empty; grinding chute clogged; burrs blocked. | Check if there are beans in the hopper. Unplug the unit, remove the hopper and burrs, and clean the grinding chute and burrs thoroughly with a brush. |
| Mida de mòlta inconsistent. | Burrs are dirty or worn; fineness setting too coarse/fine for desired result. | Clean the burrs as per maintenance instructions. Adjust the grind fineness dial to a different setting and test. If burrs are worn, contact support for replacement. |
| El molinet s'atura inesperadament. | Overheating; motor overload; safety shut-off activated. | Unplug the grinder and let it cool down for at least 30 minutes. Reduce the amount of beans being ground at once. Ensure the grinding mechanism is not jammed. |
Consells per a l'usuari
- For best results, always use fresh, whole coffee beans.
- Experiment with different grind settings to find the perfect consistency for your brewing method.
- Clean the grinder regularly, especially the burrs and chute, to prevent clogs and maintain grind quality.
- Avoid grinding oily or flavored beans too frequently without thorough cleaning, as this can leave residue and affect subsequent grinds.
Garantia i Suport
The SHARDOR HY-1430 Burr Coffee Grinder comes with a 1 anys de garantia des de la data de compra. Aquesta garantia cobreix defectes de fabricació i avaries en condicions d'ús normal.
After-sales service provided: Free Spare Parts.
For warranty claims, technical support, or to inquire about spare parts, please contact your retailer or the manufacturer directly. Keep your proof of purchase for warranty validation.
