1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your ANJ-11KW-48V-WIFI-P Hybrid Inverter. This advanced inverter is designed for both grid-tie and off-grid solar applications, offering a robust solution for managing solar power, battery storage, and grid interaction. It features 3-phase output and WIFI remote monitoring capabilities for enhanced control and convenience.
Figure 1: ANJ Hybrid Solar Inverter Overview with Key Specifications
2. Informació de seguretat
Please read and understand all safety instructions before installation and operation. Failure to follow these instructions may result in electric shock, fire, serious injury, or death.
- La instal·lació ha de ser realitzada per personal qualificat d'acord amb les normes elèctriques locals.
- Ensure the inverter is disconnected from all power sources (PV, battery, grid) before performing any maintenance or wiring.
- No obriu l'inversor casing unless explicitly instructed by the manufacturer. There are no user-serviceable parts inside.
- Eviteu el contacte amb terminals actius.
- Assegureu-vos de posar a terra correctament l'inversor.
- Do not operate the inverter in wet conditions or near flammable materials.
- Provide adequate ventilation around the inverter to prevent overheating.
3. Configuració
3.1 Instal·lació física
- Muntatge: Mount the inverter vertically on a non-flammable surface, ensuring sufficient clearance for ventilation (refer to specifications for dimensions: 280x275x120mm).
- Medi ambient: Install in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and corrosive substances.
- Pes: The inverter weighs approximately 17kg. Ensure the mounting surface can support this weight.
3.2 Connexions elèctriques
Totes les connexions elèctriques les ha de fer un electricista certificat.
- Entrada PV: Connect solar panel strings to the designated PV input terminals. Ensure the total open circuit voltage of the PV array does not exceed 500VDC. Observe correct polarity.
- Connexió de la bateria: Connect the 48V battery bank to the battery terminals. Ensure correct polarity and use appropriately sized cables. The inverter supports Lead Acid, Lithium, and Gel battery types.
- Sortida de CA: Connect the 3-phase load to the AC output terminals. The inverter provides 380V 3-Phase output.
- Connexió a la xarxa: For grid-tie operation, connect the inverter to the utility grid at the designated grid connection terminals.
- Posada a terra: Ensure the inverter chassis is properly grounded.
- Operació en paral·lel: This inverter supports parallel operation of up to 6 units for increased power output. Refer to the detailed wiring diagram for parallel connection setup.
Figura 2: Example Installation of Multiple Inverters in a Solar System
4. Instruccions de funcionament
4.1 Engegada/apagada
- Encès: After all connections are secure, switch on the battery breaker, then the PV array breaker, and finally the AC output/grid breaker. The inverter will initiate its startup sequence.
- Apagar: To shut down, reverse the power-on sequence: first switch off the AC output/grid breaker, then the PV array breaker, and finally the battery breaker.
4.2 Interfície de visualització
The inverter features a circular display for monitoring system status, including battery charge, power flow, and operational modes. Use the navigation buttons to cycle through different information screens and adjust settings.
Figure 3: Inverter Display Interface
4.3 WIFI Remote Monitoring
The inverter is equipped with WIFI for remote monitoring. Follow the instructions provided with the WIFI module to connect it to your local network and register the device with the ANJ monitoring platform. This allows you to monitor system performance, energy production, and consumption from your smartphone or computer.
4.4 Modes de funcionament
The inverter supports both Hybrid and Off-Grid operating modes. Configuration of these modes is typically done via the display interface or the remote monitoring application. Consult the detailed software manual for specific mode settings and parameters.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre inversor.
- Neteja: Periodically clean the exterior of the inverter and ventilation openings to prevent dust buildup. Use a dry, soft cloth. Do not use liquids or abrasive cleaners.
- Inspecció: Annually inspect all electrical connections for tightness and signs of corrosion. Check cables for damage.
- Ventilació: Ensure that the inverter's cooling fins and vents (visible on the side, see Figure 4) are unobstructed to allow for proper heat dissipation.
- Manteniment de la bateria: Follow the manufacturer's guidelines for your specific battery type (Lead Acid, Lithium, or Gel) to ensure proper charging and discharge cycles.
Figure 4: Inverter Side View with Cooling Fins
6. Solució De Problemes
If you encounter issues with your inverter, refer to the following basic troubleshooting steps. For complex problems, contact technical support.
- Sense potència de sortida: Check all input power sources (PV, battery, grid) and ensure all breakers are on. Verify battery voltage is within operating range.
- Inverter Overheating: Ensure adequate ventilation. Clean any dust from vents and cooling fins. Reduce load if necessary.
- Codis d'error: Consult the inverter's display or the remote monitoring app for specific error codes. Refer to the comprehensive troubleshooting guide in the full product manual for detailed explanations and solutions.
- WIFI Connectivity Issues: Ensure the WIFI module is properly installed and configured. Check network signal strength and router settings.
7. Especificacions
| Característica | Especificació |
|---|---|
| Model | ANJ-11KW-48V-WIFI-P |
| Potència nominal | 11000 W (11 kW) |
| Voltage | 48 V |
| AC Grid Input Voltage | 154-265VAC |
| PV Array Input Voltage (Max Open Circuit) | 500VDC |
| Vol. De sortidatage | 380V 3-Phase (as per product title), 220VAC±10% (for single phase configuration) |
| Freqüència de sortida | 50HZ/60HZ±1% |
| Max. MPPT Charge Current | 160A |
| Capacitat paral·lela | Fins a 6 unitats |
| Forma d'ona de sortida | Onda senyal pura |
| Eficiència MPPT | 98-99% |
| Eficiència dels inversors | >90% |
| Tipus de bateria | Lead Acid, Lithium, Gel |
| Comunicació | RS485, CAN, WIFI Remote Monitoring |
| Material | Plàstic |
| Tipus | DC/AC Inverter, Hybrid/Off-grid |
| Origen | Mainland China (Shenzhen) |
| Mida (L*W*H) | 280 * 275 * 120 mm |
| Pes | 17 kg |
| Certificats | CE, ROHS, CB, UL, KC, BIS, PSE |
8. Garantia i Suport
The ANJ-11KW-48V-WIFI-P Hybrid Inverter comes with a 5-year warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty inquiries, or any questions regarding your inverter, please contact us:
- WhatsApp: +86 15376184642
- Mòbil: +86 15376184642
- Correu electrònic: 3079500071@qq.com
9. Consells d'usuari
No hi havia consells específics per a l'usuari disponibles del servei de clients.views or Q&A for this product at the time of manual creation. However, general best practices for hybrid inverters include:
- Regularly monitor your system's performance via the WIFI app to identify any anomalies early.
- Ensure your battery bank is adequately sized for your energy consumption to maximize efficiency and battery lifespan.
- Keep the inverter's firmware updated to benefit from the latest features and performance improvements.
