1. Introducció
This manual provides essential information for the safe and effective installation, operation, and maintenance of your DC Electric Linear Actuator. This device is designed for various applications requiring linear motion, such as window lifts, desk lifts, and other automated systems in tiny houses or similar setups. Please read this manual thoroughly before using the product.
2. Precaucions de seguretat
To ensure safe operation and prevent damage to the motor, please observe the following precautions:
- Do not operate the motor under overload (stall) conditions, as this may easily damage the motor.
- Select a power supply with appropriate voltage (DC).
- If the load exceeds the rated value, the rotational speed will decrease.
- Operating near the stall torque limit may cause internal damage.
- Reducing the rotational speed will result in decreased output torque.
- The push rod motor is not suitable for use in water. Damage or burnout due to water exposure will be the user's responsibility.
- When using multiple push rods simultaneously, be aware that due to manufacturing tolerances in internal gears, motor rotors, and other accessories, slight variations in speed and thrust may occur.
ADVERTÈNCIA: PERILL D'ENFUGAMENT
Peces petites. No per a nens menors de 3 anys.
3. Característiques del producte
- Construcció duradora: The interior of the fuselage utilizes powder metallurgy technology and pure metal gears for extended lifespan.
- Rendiment estable: Features a screw-goblet design, specially enhanced with flat washers to effectively prevent screws from loosening automatically.
- Reliable Wiring: The wire is made of oxygen-free pure copper, ensuring low resistance, power-saving operation, durability, and safe use.
- Integrated Limit Switch: The push rod motor includes a built-in limit switch that automatically stops the rod at its fully extended and fully retracted positions. It also stops immediately upon any power interruption during operation.
4. Especificacions
4.1 General Properties
| Atribut | Valor |
|---|---|
| Certificació | CE |
| Ús | Electrodomèstic |
| Potència de sortida | <18.65 |
| Origen | Xina continental |
4.2 Paràmetres del producte
| Paràmetre | Valor |
|---|---|
| Nom | Miniature small lift |
| Potència nominal | 20W-30W |
| Voltage | DC 12V/24V |
| Temperatura ambient | -20 °C ~ 75 °C |
| Decibel | Below 42db |
| Putter material | Aliatge d'alumini |
| Característiques del producte | With animal body pushing, pulling, lifting, reducing, etc. |
4.3 Model and Performance Overview
| Vol. Operatiutage (V) | DC 12V/24V/36V | ||||||
|---|---|---|---|---|---|---|---|
| No-load Speed (mm/s) | 5 | 10 | 15 | 20 | 30 | 45 | 90 |
| Force (N) Push | 1000 | 900 | 700 | 500 | 300 | 200 | 100 |
| Working Stroke (mm) | Can be customized 10-1000mm | ||||||
4.4 Stroke-Specific Details
Carrera: 20 mm
Vol. opcionaltage default: 12V or 24V
Optional torque push speed:
- Speed 5MM/S, Torque 1000N
- Speed 10MM/S, Torque 900N
- Speed 15MM/S, Torque 700N
- Speed 20MM/S, Torque 500N
- Speed 30MM/S, Torque 300N
- Speed 45MM/S, Torque 200N
- Speed 90MM/S, Torque 100N
Fully retractable hole center distance: 120MM
Total extension hole center distance (in fully retracted state): 140MM
Carrera: 30 mm
Vol. opcionaltage default: 12V or 24V
Optional torque push speed:
- Speed 5MM/S, Torque 1000N
- Speed 10MM/S, Torque 900N
- Speed 15MM/S, Torque 700N
- Speed 20MM/S, Torque 500N
- Speed 30MM/S, Torque 300N
- Speed 45MM/S, Torque 200N
- Speed 90MM/S, Torque 100N
Fully retractable hole center distance: 130MM
Total extension hole center distance (in fully retracted state): 160MM
Carrera: 50 mm
Vol. opcionaltage default: 12V or 24V
Optional torque push speed:
- Speed 5MM/S, Torque 1000N
- Speed 10MM/S, Torque 900N
- Speed 15MM/S, Torque 700N
- Speed 20MM/S, Torque 500N
- Speed 30MM/S, Torque 300N
- Speed 45MM/S, Torque 200N
- Speed 90MM/S, Torque 100N
Fully retractable hole center distance: 150MM
Total extension hole center distance (in fully retracted state): 200MM
Carrera: 100 mm
Vol. opcionaltage default: 12V or 24V
Optional torque push speed:
- Speed 5MM/S, Torque 1000N
- Speed 10MM/S, Torque 900N
- Speed 15MM/S, Torque 700N
- Speed 20MM/S, Torque 500N
- Speed 30MM/S, Torque 300N
- Speed 45MM/S, Torque 200N
- Speed 90MM/S, Torque 100N
Fully retractable hole center distance: 200MM
Total extension hole center distance (in fully retracted state): 300MM
5. Instal·lació
5.1 Dimensions d'instal·lació
Before installation, confirm that the installation space is sufficient and choose the appropriate speed according to the weight of the object being pushed.
5.2 Mètode de cablejat
The DC electric push rod motor (12V/24VDC) has two wires. Connecting these wires to the positive and negative electrodes will control the extension and retraction of the rod. To control the telescopic movement, you can add a positive and negative switch to reverse the polarity.
6. Funcionament
6.1 Funcionament bàsic
The linear actuator extends or retracts based on the polarity of the DC voltage applied to its two wires. Reversing the polarity will reverse the direction of motion.
6.2 Speed and Thrust Adjustment
The speed of the push rod can be adjusted by varying the input voltage. Reducing the voltage will decrease both the speed and the thrust. Note that faster speeds generally result in smaller accurate force, while slower speeds provide greater thrust.
7. Manteniment
To ensure the longevity and optimal performance of your linear actuator, follow these general maintenance guidelines:
- Keep the actuator clean and free from dust and debris.
- Avoid exposing the unit to water or excessive moisture, as it is not waterproof.
- Regularly inspect the wiring for any signs of wear or damage.
- Ensure that the mounting points are secure and free from corrosion.
8. Solució De Problemes
If you encounter issues with your linear actuator, consider the following:
- Actuator not moving: Check the power supply to ensure it is providing the correct DC voltage (12V or 24V). Verify that the wiring connections are secure and correctly polarized. Ensure the load does not exceed the rated capacity.
- Slow or weak movement: This could indicate an excessive load or insufficient voltage. Reduce the load or ensure the power supply is adequate.
- Funcionament intermitent: Check for loose connections or potential damage to the internal components. Avoid operating under stall conditions.
9. Garantia i Suport
For any issues not covered in this manual or for technical support, please refer to the official product page or contact the seller directly. Keep your purchase records for any warranty claims.
Podeu descarregar un manual d'usuari en format PDF: Manual d'usuari (PDF)
