1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of the GEYA GPS8-02 Din Rail Voltage and Current Protector. The GPS8-02 is designed to safeguard household equipment from damage caused by overvoltage, minvartage, and overcurrent conditions. It features true RMS measurement for accurate monitoring and protection.
2. Informació de seguretat
ADVERTÈNCIA: Perill de descàrrega elèctrica. La instal·lació i el manteniment només els ha de dur a terme personal qualificat.
- Desconnecteu sempre l'alimentació abans d'instal·lar o fer el manteniment del dispositiu.
- Assegureu-vos que totes les connexions de cablejat siguin segures i que compleixin els codis elèctrics locals.
- No feu funcionar el dispositiu si sembla que està danyat.
- This product does not have an isolation function. Always disconnect the superior Miniature Circuit Breaker (MCB) during maintenance to ensure safety.
3. Producte acabatview
The GEYA GPS8-02 is a compact Din Rail mounted device featuring a digital display for real-time voltage and current readings, along with indicator LEDs for various protection states. It includes control buttons for setting parameters and manual operation.
Components and Indicators:
- Pantalla digital: Mostra el volum en temps realtage (V) and current (A) values.
- Indicadors LED:
- `>U`: Overvoltage indicador
- `
- `>I`: Overcurrent indicator
- `_/_`: Power open and close indicator
- Botons:
- `M`: Mode/Setting button
- `▲`: Increase value / Manual ON/OFF
- `Power Symbol`: Power ON/OFF / Reset
4. Especificacions
The following table details the technical specifications of the GPS8-02 protector:
| Paràmetre | Valor |
|---|---|
| Funció | Més de voltage, sota voltage i sobreintensitat |
| Volum de subministrament nominaltage | AC220V (L-N) |
| Freqüència nominal de subministrament | 45 ~ 65 Hz |
| Operació voltage gamma | 80V ~ 400V (L-N) |
| Corrent nominal de funcionament | 32A, 40A, 50A, 63A, 80A (AC1) |
| Càrrega | AC max 3VA |
| Més de voltage operation value | OFF, 230V ~ 300V |
| Sota el voltage operation value | 140V ~ 210V, OFF |
| Vol sobre / baixtage action delay | 0.1s ~ 10s |
| Over current operation value | 1 ~ 32A, 40A, 50A, 63A, 80A |
| Over current action delay | 2s ~ 600s |
| Power-up delay | 2s ~ 600s |
| Restableix el temps | 2s ~ 900s |
| Error de mesura | menys del 1% |
| Electrical life (AC1) | 1 x 104 |
| Vida mecànica | 1 x 106 |
| Temperatura de funcionament | -20 °C ~ +60 °C |
| Temperatura d'emmagatzematge | -35 °C ~ +75 °C |
| Muntatge | Din Rail EN/IEC 60715 |
| Grau de protecció | IP40 for front panel / IP20 terminals |
| Posició operativa | qualsevol |
| Overvoltage categoria | III. |
| Grau de contaminació | 2 |
| Dimensions | 82 × 36 × 68 mm |
| Pes | 135 g |
5. Instal·lació
5.1 Muntatge
The GPS8-02 is designed for Din Rail mounting (EN/IEC 60715). Simply clip the device onto a standard 35mm Din Rail in your electrical panel.
5.2 Esquema de cablejat
Ensure correct wiring according to the diagrams below. The device supports both 'Uper Incoming Line' and 'Down Incoming Line' configurations. Connect the Neutral (N) and Live (L) wires as indicated.
NOTE: This product does not have an isolation function. Please disconnect the superior MCB during maintenance!!!
6. Instruccions de funcionament
6.1 Engegada inicial
Upon initial power-up, the device will perform a self-check and then display the current voltage and current readings. There may be a power-up delay (default 2s).
6.2 Configuració de paràmetres
- Entra al mode de configuració: Press and hold the 'M' button for 3 seconds to enter the setting mode.
- Paràmetres de navegació: Short press the 'M' button to cycle through different parameters (e.g., overvoltage value, undervoltage value, overcurrent value, delay times).
- Ajusta els valors: Use the '▲' button to increase the value of the selected parameter.
- Desa la configuració: After modifying a parameter, press and hold the 'M' button for 3 seconds to save the setting and exit the setting mode.
6.3 Control manual
- ON/OFF manual: After exiting the setting mode, the '▲' button can be used to manually turn on or off the load.
- Restabliment d'errors: If the automatic fault reset function is turned off, the 'Power Symbol' button can be used for manual reset when a fault occurs.
6.4 Functions Diagram (Voltage/Current Recovery)
El dispositiu monitoritza el voltage and current continuously. When a fault (over/under voltage, overcurrent) occurs, the device will trip. After the fault condition clears and the set reset time has elapsed, the device will automatically recover (if auto-reset is enabled). The functions diagram in Figure 4.1 illustrates this recovery cycle.
7. Manteniment
- Mantingueu el dispositiu net i lliure de pols i humitat.
- Periodically check all wiring connections to ensure they are tight and secure.
- Inspect the device for any signs of physical damage. If damage is found, replace the device immediately.
- As noted in the installation section, always disconnect the main power supply (superior MCB) before performing any maintenance or inspection on the device.
8. Solució De Problemes
If you encounter issues with your GPS8-02 protector, consider the following:
- El dispositiu no s'encén: Check the main power supply and ensure all connections are correct and secure.
- El dispositiu s'activa amb freqüència: Review your set parameters (overvoltage, minvartage, overcurrent values, and action delays). Ensure they are appropriate for your connected load and power supply stability.
- Vol incorrectetage/current readings: Verify wiring connections. If readings are consistently inaccurate, the device may require replacement.
- Device does not reset after fault: Check if the automatic reset function is enabled in the settings. If not, a manual reset using the 'Power Symbol' button is required.
- Load does not turn on/off manually: Ensure you are out of the setting mode before attempting manual control with the '▲' button.
If problems persist after checking these points, contact customer support.
9. Consells d'usuari
- Ajust de paràmetres: Take time to properly set the overvoltage, minvartage, and overcurrent thresholds to match your specific electrical system and connected appliances. Incorrect settings can lead to nuisance tripping or insufficient protection.
- Configuració del retard: Utilize the power-up delay and action delay settings to prevent tripping from momentary fluctuations or inrush currents from certain appliances.
- Verificació del cablejat: Double-check your wiring against the provided diagrams, especially the 'Uper Incoming Line' vs 'Down Incoming Line' configuration, to ensure proper functionality and safety.
10. Garantia i Suport
For warranty information or technical support, please refer to the product packaging or contact GEYA customer service directly. Keep your purchase receipt as proof of purchase.
