ORICO M.2 NVMe Magnetic SSD Enclosure User Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your ORICO M.2 NVMe Magnetic SSD Enclosure (Models AP42F and AP42P). Please read this manual thoroughly before using the product to ensure proper functionality and safety.

The ORICO M.2 NVMe Magnetic SSD Enclosure is a high-performance external storage solution designed for M.2 NVMe 2230/2242 SSDs, offering 10Gbps data transfer speeds and up to 100W Power Delivery (PD). It features a magnetic design for easy attachment to compatible devices and the AP42F model includes dual TF/SD card slots for expanded functionality. It is compatible with a wide range of operating systems and devices, including Windows, Linux, Mac OS, Android, and iOS.

2. Contingut del paquet

Si us plau, comproveu el contingut del paquet en desembalar-lo. Si falta algun article o hi ha algun dany, poseu-vos en contacte amb el vostre distribuïdor.

Figura 2.1: Contingut del paquet

3. Especificacions

Figura 3.1: Especificacions del producte

Note: Enclosure only (SSD not included). For mobile use, SSDs <4.5W are recommended. Higher-power SSDs may require PD port power. Excessive power may cause disconnections during recording.

4. Configuració i instal·lació

Segueix aquests passos per instal·lar el teu SSD NVMe M.2 a la carcassa.

Figure 4.1: Supported M.2 SSD Sizes and Key Types

1. Obriu el recinte: Unscrew and gently remove the bottom cover of the enclosure.
   

   Figura 4.2: Passos d'instal·lació a continuacióview
2. Instal·leu el disc dur: Carefully insert your M.2 NVMe SSD into the slot at a 30-degree angle. Gently push down and secure it with the provided rear screw. Ensure the SSD is properly seated.
3. Aplicar coixinet tèrmic: Place the thermal pad (included) on top of the installed hard drive. This helps dissipate heat and maintain optimal performance.
4. Instal·lació completa: Close the bottom cover and tighten the screws to secure the enclosure.

For a visual guide, please refer to the "Hard Drive Installation Guide" section in the official PDF user manual available at ORICO M.2 NVMe Enclosure User Manual (PDF).

5. Instruccions de funcionament

5.1 Connexió a dispositius

The enclosure supports a wide range of devices and operating systems.

Figure 5.1: System and Device Compatibility

• Connect the enclosure to your device (PC, laptop, smartphone, tablet, etc.) using the provided USB-C to USB-C cable.
• For devices with Lightning ports, a compatible Lightning adapter can be used (sold separately).
• The enclosure supports USB-C (10Gbps PD100W) for both data input and power input.

5.2 Data Transfer and Power Delivery

Experience blazing-fast data transfer and simultaneous charging.

Figura 5.2: Transferència de dades d'alta velocitat

• The enclosure supports 10Gbps read/write speeds, allowing for 1GB file transfers in approximately 1 second.
• With PD 100W support, you can transfer data and charge your connected device simultaneously, eliminating concerns about storage and battery life.


Figure 5.3: Continuous Power Delivery

5.3 TF/SD Card Reader Functionality (AP42F Model Only)

The AP42F model includes dual slots for TF and SD cards.

Figure 5.4: TF/SD Card Reading

• Insert your TF or SD card into the corresponding slot.
• The enclosure supports USB 3.0 high-speed data transfer for memory cards, with theoretical read speeds up to 90MB/s.

5.4 Fixació magnètica

The enclosure features a multi-magnetic system for secure attachment.

Figure 5.5: Magnetic Convenience

• The 17 built-in magnets ensure a firm, wobble-free lock on contact with compatible surfaces or devices.
• Use the included universal adapter ring to enable magnetic attachment to devices that do not have built-in magnetic capabilities.

5.5 Descripció de la llum indicadora

The LED indicator provides status information:

Figure 5.6: Activity Status Indicator

• Blau sòlid: The enclosure is powered on, and the hard drive is recognized.
• Blau intermitent: Data transfer is in progress. Do not disconnect the device during this time.
• Sense llum: The enclosure is powered off or the hard drive is not recognized.

6. Manteniment

• Neteja: Use a soft, dry cloth to clean the exterior of the enclosure. Avoid using liquid cleaners or solvents.
• Emmagatzematge: Guardeu la caixa en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Smart Hibernation: The enclosure features a smart hibernation function that activates after 10 minutes of inactivity to extend the service life of the installed hard disk.
• Gestió tèrmica: Ensure the thermal pad is correctly placed on the SSD during installation to aid in heat dissipation.

7. Solució De Problemes

8. Consells d'usuari

• SSD Compatibility: While the enclosure supports M.2 NVMe 2230/2242 SSDs, ensure your SSD is NVMe and not SATA, as they use different protocols.
• Thermal Pad: Always use the provided thermal pad during SSD installation. It's crucial for heat dissipation, especially during prolonged high-speed transfers, to prevent throttling and ensure drive longevity.
• Qualitat del cable: For optimal 10Gbps performance, always use the included high-quality USB-C to USB-C cable or another certified cable capable of 10Gbps data transfer. Not all USB-C cables are equal.
• Expulsió segura: Always safely eject the enclosure from your operating system before disconnecting it to prevent data corruption.
• Col·locació de l'anell magnètic: When using the universal adapter ring for magnetic attachment, ensure it's placed on a clean, flat surface of your device for maximum adhesion.

9. Precaucions de seguretat

• Do not expose the product to water, moisture, or extreme temperatures.
• Eviteu deixar caure o sotmetre el producte a forts impactes.
• No intenteu desmuntar ni modificar el producte. Això anul·larà la garantia.
• Mantenir fora de l'abast dels nens.
• Feu servir només els accessoris proporcionats o recomanats.
• Disconnect the device during thunderstorms or when unused for long periods.

10. Garantia i Suport

ORICO products come with a standard warranty. Please refer to the official ORICO weblloc web o la documentació de compra per conèixer els termes i condicions específics de la garantia.

For technical support, troubleshooting assistance, or warranty claims, please contact ORICO customer service or your local distributor. You can also refer to the comprehensive "Warranty Regulations" section in the official PDF user manual for more details: ORICO M.2 NVMe Enclosure User Manual (PDF).

11. Preguntes freqüents (FAQ)

Q: Is the SSD included with the enclosure?

A: No, the M.2 NVMe SSD is not included and must be purchased separately.

P: Quins tipus de SSD M.2 són compatibles?

A: The enclosure supports M.2 NVMe SSDs in 2230 and 2242 form factors. It is not compatible with M.2 SATA SSDs.

Q: Can I use this with my iPhone for recording 4K video?

A: Yes, it supports ProRes 4K 60/120fps recording and direct saving to the SSD with compatible iPhone models (e.g., iPhone 15 Pro/Pro Max, iPhone 16 Pro/Pro Max). For higher power SSDs, external PD power might be required to prevent disconnections.

Q: Does the AP42P model have a TF/SD card reader?

A: No, only the AP42F model includes the TF/SD card reader functionality.

Q: How do I know if the enclosure is working?

A: The LED indicator will show a solid blue light when powered on and the SSD is recognized. It will flash blue during data transfer.