1. Producte acabatview
This manual provides instructions for the Comfast series of outdoor WiFi Repeater/Access Points, including models CF-EW71 V2, CF-EW82, and CF-EW87. These devices are designed to provide robust and extended wireless coverage in various outdoor environments, featuring high power, advanced WiFi standards, and durable IP66-rated enclosures. None of these models include a built-in modem function and Mesh support is not available.
Each model offers distinct features and performance capabilities:
- CF-EW71 V2 (WiFi 4): 2.4GHz 300Mbps, 2*5dBi Antennas, 1*100Mbps LAN Port, 1*100Mbps WAN Port, 48V 0.32A POE Power Adapter, IP66 rated.
- CF-EW82 (WiFi 5): 2.4GHz 400Mbps; 5.8GHz 867Mbps, 2*5dBi Antennas, 1*1000Mbps LAN/WAN Port, 48V 0.32A POE Power Adapter, IP66 rated.
- CF-EW87 (WiFi 7): 2.4GHz 688Mbps; 5.8GHz 2882Mbps, 3*5dBi Antennas, 2*1000Mbps LAN Ports, 1*1000Mbps WAN Port, 1*DC Power Supply Interface, 48V 0.32A POE Power Adapter/DC (12V/1.5A), IP66 rated.
2. Especificacions
Detailed specifications for each model are provided below. For a quick comparison, refer to the combined specifications table.
2.1. CF-EW87 (WiFi 7 3600Mbps) Specifications
| Característica | Descripció |
|---|---|
| Maquinari | IPQ5312+QCN6412+QCA8337, DDR: 512MB, Flash: 128MB |
| Antena | 3*5dBi external omnidirectional antennas |
| Tarifa sense fil | 2.4GHz: 688Mbps; 5.8GHz: 2882Mbps (Total 3600Mbps) |
| Paràmetres de RF | Output Power(Max): 26dBm (400mW); Receiving Sensitivity(Min): -96dBm; Frequency: 2.412GHz-2.484GHz; 5.180GHz-5.825GHz |
| Ports físics | 2*10/100/1000Mbps LAN RJ45, 1*10/100/1000Mbps WAN RJ45, 1*DC Power Supply Interface, 1*Reset Button |
| Font d'alimentació | POE(48V/0.32A) / DC(12V/1.5A) |
| Consum d'energia | <18W |
| Nivell impermeable | IP66 |
| MTBF | >250000H |
| Material exterior | Plastic (Imported ABS), Wall hanging and pole installation |
| Característiques físiques | Size: 90mm*388mm (Without antenna), Antenna length: 188mm |
| Medi ambient | Operating Temp: -10°C ~ 55°C; Storage Temp: -40°C ~ 70°C; Operating Humidity: 10% ~ 90% RH; Storage Humidity: 5% ~ 90% RH (Non-condensing) |
2.2. CF-EW82 (WiFi 5 1300Mbps) Specifications
| Característica | Descripció |
|---|---|
| Maquinari | MT7621AT+MT7615DN, DDR: 256MB, Flash: 16MB |
| Antena | 2*5dBi external omnidirectional antennas |
| Tarifa sense fil | 2.4GHz: 400Mbps; 5.8GHz: 867Mbps (Total 1300Mbps) |
| Paràmetres de RF | Output Power(Max): 27dBm (500mW); Receiving Sensitivity(Min): -96dBm; Frequency: 802.11b/g/n:2.412GHz-2.472GHz; 802.11ac/an/a:5.180GHz-5.825GHz |
| Ports físics | 1*10/100/1000Mbps LAN/WAN RJ45 Ethernet port, 1*RESET |
| Font d'alimentació | Gigabit POE (48V/0.32A) |
| Consum d'energia | <18W |
| Nivell impermeable | Grau IP66 |
| MTBF | >250000H |
| Material exterior | Plastic (Imported ABS), Wall hanging and pole installation |
| Característiques físiques | Size: 56.9*39.7*409.6mm (including antenna length); Single antenna length: 200.3mm |
| Medi ambient | Operating Temp: -10°C ~ 55°C; Storage Temp: -40°C ~ 70°C; Operating Humidity: 10% ~ 90% RH; Storage Humidity: 5% ~ 90% RH (Non-condensing) |
2.3. CF-EW71 V2 (WiFi 4 300Mbps) Specifications
| Característica | Descripció |
|---|---|
| CPU | Qualcomm QCA9533 |
| RAM (DDR) | 64 MB |
| Emmagatzematge Flash | 16 MB |
| Poder Amplifier (PA) Chipset | SE2576L * 2 |
| Antena | Built-in 2 * 5dBi Antennas |
| Estàndard sense fils | IEEE 802.11b/g/n |
| Velocitat màxima de dades | 300 Mbps |
| Banda de freqüència | 2.412GHz - 2.484GHz (2.4GHz Single-band) |
| Potència de transmissió (màx.) | 500 mW (27 dBm) |
| Receive Sensitivity (Min) | -96 dBm |
| Ports Ethernet | 1 x 10/100Mbps LAN (RJ45), 1 x 10/100Mbps WAN (RJ45) |
| Other Ports/Buttons | 1 x Botó de restabliment |
| LED d'estat | WAN, LAN, WiFi, Power |
| Mètodes d'alimentació | PoE (802.3af/at) (0-100m cable distance), 48V 0.32A PoE Adapter (Configured) |
| Màx. Consum d'energia | < 8 W |
| Classificació de protecció d'entrada (IP). | IP66 |
| Mètode d'instal·lació | Wall-mounted / Pole-mounted |
| Material de la caixa | Plastic (Imported ABS) |
| Dimensions | 353 * 85 * 44 mm |
| Temperatura de funcionament | -10 °C ~ 55 °C |
| Temperatura d'emmagatzematge | -40 °C ~ 70 °C |
| Humitat de funcionament | 10% ~ 90% HR (sense condensació) |
| Humitat d'emmagatzematge | 5% ~ 90% HR (sense condensació) |
3. Contingut del paquet
Please verify the contents of your package against the list below for your specific model.
3.1. CF-EW87 Package Contents
- CF-EW87 Outdoor Wireless AP Unit
- Cable de xarxa
- Font d'alimentació POE
- Brides de cable
- Tapa impermeable
- Juntes i cargols
- Manual d'instal·lació
3.2. CF-EW82 Package Contents
- CF-EW82 Outdoor Wireless AP Unit
- Cable de xarxa
- Font d'alimentació POE
- Brides de cable
- Cargols
- Manual d'instal·lació
3.3. CF-EW71 V2 Package Contents
- CF-EW71 V2 Outdoor Wireless AP Unit
- Adaptador d'alimentació POE
- Targeta de garantia
- Cargols
- Certificat
- Guia d'instal·lació
- Cable de xarxa
- Stainless Steel Cable Tie
4. Instal·lació
The Comfast Outdoor APs support both wall-mounted and pole-mounted installations. Ensure the device is placed in an optimal location for signal coverage and away from obstructions.
4.1. Identifying Ports and Indicators
Before installation, familiarize yourself with the device's ports and LED indicators.
Common ports include LAN, WAN, Reset button, and LED indicators for WAN, LAN, WiFi, and Power. The CF-EW87 also features a DC power supply interface.
4.2. Muntatge del dispositiu
Choose between wall-mounting or pole-mounting based on your outdoor environment.
4.2.1. Instal·lació de paret
- Mark the drilling points on the wall using the device or mounting bracket as a template.
- Perfora forats i insereix tacs de paret si cal.
- Fixeu el suport de muntatge a la paret amb cargols.
- Attach the AP unit to the mounting bracket.
4.2.2. Pole-Mounted Installation
- Attach the mounting bracket to the back of the AP unit.
- Use the provided cable ties or stainless steel cable ties to secure the AP unit (with bracket) to a pole.
- Ensure the device is firmly attached and oriented correctly for optimal signal.
4.3. Powering the Device (PoE Connection)
All models support Power over Ethernet (PoE), allowing both power and data to be transmitted over a single Ethernet cable. The CF-EW87 also supports a DC power supply.
- Connect one end of the Ethernet cable to the WAN port of the Outdoor AP.
- Connect the other end of the Ethernet cable to the "POE" port of the provided PoE adapter.
- Connect another Ethernet cable from the "LAN" port of the PoE adapter to your router or network switch.
- Connecteu l'adaptador PoE a una presa de corrent.
- For CF-EW87, if using DC power, connect a 12V/1.5A DC adapter to the DC port.
5. Funcionament
Once installed and powered, your Comfast Outdoor AP is ready to extend your wireless network.
5.1. Configuració i configuració inicials
Refer to the included "Installation Guide" or "Quick Installation Guide" for initial setup steps, which typically involve connecting to the device's default WiFi network and accessing its webinterfície de gestió basada en a través d'una web browser (e.g., 192.168.1.1). From there, you can configure network settings, WiFi name (SSID), password, and operating mode (AP, Repeater, etc.).
5.2. AC Management (for Multiple APs)
For large-scale deployments with multiple Comfast APs, centralized management can be achieved using a Comfast AC (Access Controller) device. This allows for unified configuration, upgrades, data query, and remote control, simplifying network management and reducing operational costs.
5.3. Roaming sense interrupcions
The Comfast Outdoor APs support intelligent roaming technology. In environments with multiple APs, devices can automatically connect to the strongest WiFi signal in the coverage area, ensuring stable and uninterrupted network connectivity as users move around.
6. Manteniment
To ensure optimal performance and longevity of your Comfast Outdoor AP, follow these maintenance guidelines:
- Neteja regular: Periodically clean the exterior of the device to remove dust, dirt, and debris. Use a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Comproveu les connexions: Ensure all cable connections (Ethernet, power) are secure and free from damage.
- Actualitzacions de firmware: Comproveu el del fabricant website for available firmware updates. Keeping the firmware updated can improve performance, add new features, and enhance security.
- Protecció del medi ambient: The device is IP66 rated for outdoor use, providing protection against dust and powerful water jets. However, avoid direct exposure to extreme conditions beyond its operating temperature range.
7. Solució De Problemes
If you encounter issues with your Comfast Outdoor AP, try the following troubleshooting steps:
- Sense energia:
- Ensure the PoE adapter is properly connected to a power outlet and the AP.
- Check the Ethernet cable for damage if using PoE.
- For CF-EW87, verify the DC adapter connection if used.
- Sense connexió a Internet:
- Verify that your main router or modem is working correctly.
- Check the Ethernet cable connection between the PoE adapter (LAN port) and your router/switch.
- Ensure the AP's WAN port is correctly configured in its web interfície.
- Weak WiFi Signal or Slow Speed:
- Ensure the AP is mounted in an optimal location, free from physical obstructions.
- Check for sources of interference (e.g., other wireless devices, large metal objects).
- Verify antenna connections (if detachable).
- Consider adjusting the transmit power settings in the web interface (if available).
- No es pot accedir Web Interfície de gestió:
- Ensure your computer is connected to the AP's network (either wirelessly or via Ethernet).
- Verify the IP address of the AP. Try the default IP (e.g., 192.168.1.1).
- Desactiveu temporalment qualsevol tallafocs o programari antivirus del vostre ordinador.
- If all else fails, perform a factory reset (see below).
- Restabliment de fàbrica:
To restore the device to its factory default settings, locate the Reset button (usually a small pinhole). With the device powered on, press and hold the Reset button for approximately 5-10 seconds until the LED indicators change, then release. The device will reboot with default settings.
8. Consells d'usuari
- Col·locació òptima: For best outdoor coverage, mount the AP as high as possible and with a clear line of sight to the areas you want to cover.
- Antenna Orientation (for models with adjustable antennas): Experiment with antenna angles to optimize signal strength and coverage in your specific environment.
- Seguretat: Always change the default administrator password and WiFi password immediately after initial setup. Use WPA2/WPA3 encryption for your wireless network.
- Segmentació de la xarxa: If your device supports multiple SSIDs or VLANs, consider creating a separate guest network for visitors to enhance security.
- Funcionalitat WPS: If your device supports WPS (Wi-Fi Protected Setup), you can use it for quick and easy connection of WPS-compatible devices to your network. Refer to your device's web interface for WPS activation.
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact Comfast customer support directly. Keep your purchase receipt and product serial number handy for faster service.
