Xincode GT-2013-2d Wireless Barcode Scanner User Manual

1. Introducció

The Xincode GT-2013-2d wireless barcode scanner is a high-performance, industrial-grade device designed for efficient and reliable barcode decoding. Featuring a CPU+NPU Dual Core Processor, it offers fast platform decoding with millisecond-level algorithm time, ensuring result output without delay. This scanner is capable of reading various 1D, 2D, and stacked codes, including challenging DPM codes and difficult inkjet codes (overflow, broken frames, smudged, scratched, distorted, wrinkled). Its robust design is waterproof and dustproof (IP52 rated), suitable for harsh environments, and can withstand free falls of up to 1.5 meters.

The device utilizes white light LED illumination and a global CMOS sensor with 1280*1024 resolution for superior scanning accuracy. It supports 2.4G wireless communication for stable and reliable signal transmission and comes with a 2750 mAh chargeable lithium battery for long standby time.

2. Característiques clau

• Processador avançat: Equipped with a CPU+NPU Dual Core Processor for rapid decoding.
• Superior Decoding Capability: Efficiently reads 1D, 2D, and stacked codes, including DPM and difficult inkjet codes.
• Sensor d'alta resolució: Global CMOS sensor with 1280*1024 resolution and white light LED illumination.
• Disseny durador: IP52 waterproof and dustproof rating, with 1.5m free fall resistance for industrial use.
• Connectivitat sense fils: Stable 2.4G wireless communication with an 80m open range.
• Llarga vida útil de la bateria: 2750 mAh chargeable lithium battery providing up to 36,000 scans on a full charge (6 hours charging time).
• Múltiples interfícies: USB 2.0 (Type B) for the code reader and USB 2.0 (Type B/A) for the smart base.
• Compacte i lleuger: Code reader approx. 160g, smart base approx. 120g.

3. Especificacions

4. Guia de configuració

4.1 Desembalatge i inspecció inicial

Carefully unpack the barcode scanner and its accessories. Verify that all components are present:

• Xincode GT-2013-2d Wireless Barcode Scanner
• Smart Charging Base
• Cable USB
• Manual d'usuari (aquest document)

Inspect the scanner and base for any visible damage. If any damage is found, do not proceed with setup and contact customer support.

4.2 Càrrega de l'escàner

1. Connect the USB cable to the Smart Charging Base and plug the other end into a power source (e.g., computer USB port or USB wall adapter).
2. Place the barcode scanner onto the charging base. Ensure it is seated correctly.
3. The scanner's LED indicator will show charging status. A full charge takes approximately 6 hours.

4.3 Connecting the Smart Base to a Host Device

The smart base connects to your computer or host system via a USB cable.

1. Plug the USB cable into the USB 2.0 Type B port on the smart base.
2. Connect the USB Type A end of the cable to an available USB port on your computer.
3. The system should automatically detect and install the necessary drivers. If not, refer to your operating system's device manager for troubleshooting or contact support.

5. Instruccions de funcionament

5.1 Engegada/apagada

• To power on the scanner, press and hold the trigger button for a few seconds until you hear a beep and the LED indicator lights up.
• To power off, press and hold the trigger button until you hear a series of beeps and the LED indicator turns off.

5.2 Escaneig de codis de barres

1. Ensure the scanner is powered on and connected to the smart base (or directly via USB if applicable).
2. Point the scanner's aiming system (orange LED) at the center of the barcode.
3. Press the trigger button. The white LED illumination will activate, and the scanner will attempt to read the barcode.
4. A successful scan will be indicated by a beep and/or a change in the LED indicator. The decoded data will be transmitted to your host device.

5.3 Decoding Difficult Codes

The Xincode GT-2013-2d is designed with a robust code reading algorithm to handle various challenging codes:

• DPM Codes: For Direct Part Mark (DPM) codes, ensure adequate lighting and try scanning from different angles and distances.
• Damaged/Wrinkled Codes: The scanner's advanced imaging can often read codes with minor damage. Try adjusting the angle or distance to find a readable section.
• Low Contrast Codes: The scanner's white light LED illumination helps improve contrast for better decoding.

5.4 Continuous and Batch Scanning

The scanner supports continuous code reading and batch code reading for improved efficiency. Refer to the detailed programming guide (usually found in the full manual or SDK) for specific settings to enable these modes.

6. Manteniment

6.1 Neteja de l'escàner

• Regularly clean the scanner's scanning window with a soft, lint-free cloth.
• Per a la brutícia tossuda, lleugerament dampen the cloth with water or a mild, non-abrasive cleaning solution. Do not spray liquids directly onto the scanner.
• Eviteu utilitzar productes químics agressius, dissolvents o materials abrasius, ja que poden danyar el dispositiu.

6.2 Cura de la bateria

• Per allargar la durada de la bateria, eviteu descarregar-la completament amb freqüència.
• Guardeu l'escàner en un lloc fresc i sec quan no l'utilitzeu durant períodes prolongats.
• Si no heu d'utilitzar l'escàner durant molt de temps, carregueu-lo al 50% aproximadament abans de guardar-lo.

6.3 Consideracions ambientals

While the scanner is IP52 rated for dust and water resistance and designed for industrial use, avoid exposing it to extreme temperatures, direct sunlight, or highly corrosive environments for prolonged periods.

7. Solució De Problemes

7.1 Scanner Not Reading Barcodes

• Check Aiming: Ensure the orange LED aiming system is centered on the barcode.
• Distància/Angle: Adjust the distance and angle to the barcode. Some codes require specific distances for optimal reading.
• Qualitat del codi de barres: Verify the barcode is not severely damaged, smudged, or poorly printed beyond the scanner's capability.
• Il·luminació: Ensure sufficient ambient light, but avoid direct glare on the barcode.
• Symbology Enabled: Confirm that the specific barcode symbology (e.g., QR Code, Code 128) is enabled in the scanner's settings. Refer to the programming guide for configuration barcodes.

7.2 No Data Transmission to Host

• Connexió: Ensure the smart base is securely connected to the host device via USB.
• Potència: Verify the scanner and base are powered on.
• Conductors: Check if the USB drivers are correctly installed on your computer. Try reconnecting the USB cable or restarting the computer.
• Enllaç sense fil: For wireless operation, ensure the scanner is properly paired with its smart base. If not, re-pair the devices according to the programming guide.

7.3 Scanner Not Charging

• Cable/Adapter: Check the USB cable and power adapter for damage and ensure they are properly connected.
• Base Connection: Make sure the scanner is correctly seated on the charging base.
• Font d'alimentació: Proveu un altre port USB o adaptador de corrent.

8. Consells d'usuari

• Optimize Scanning Angle: For reflective surfaces, try scanning at a slight angle to avoid glare.
• Actualitzacions de firmware: Reviseu periòdicament el fabricant weblloc web per a actualitzacions de firmware per garantir un rendiment i una compatibilitat òptims.
• Configuració de còpia de seguretat: If you customize scanner settings using programming barcodes, keep a record or scan sequence of these settings for easy restoration.
• Gestió de la bateria: For prolonged wireless use, consider having a spare charged battery or regularly placing the scanner on its base during breaks.

9. Garantia i Suport

The Xincode GT-2013-2d Wireless Barcode Scanner comes with a 1 anys de garantia des de la data de compra. Aquesta garantia cobreix defectes de fabricació i avaries en condicions d'ús normal.

For technical support, warranty claims, or any inquiries regarding your product, please contact your vendor or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty services.

Informació de contacte del fabricant:

• WhatsApp/WeChat: Jack +86 19074935331
• Correu electrònic: 3981883272@qq.com

For more information about Xincode Technology and its products, you may visit their official weblloc.