BUTURE BC02

Manual d'usuari de l'arrencador de cotxe BUTURE BC02 5500A amb compressor d'aire de 150 PSI

Model: BC02

Introducció

Thank you for choosing the BUTURE BC02 Car Jump Starter with Air Compressor. This versatile device combines a powerful jump starter, a portable air compressor, a power bank, and an emergency light, making it an essential tool for any vehicle owner. Please read this manual carefully before use to ensure safe and optimal operation.

BUTURE BC02 Jump Starter with Air Compressor and accessories

Figure 1: BUTURE BC02 Jump Starter and included accessories.

Informació important de seguretat

  • Utilitzeu sempre protecció ocular quan treballeu amb piles.
  • Do not allow the jump starter clamps to touch each other once connected to the device.
  • No engegueu una bateria congelada.
  • Assegureu-vos que el dispositiu estigui completament carregat abans d'utilitzar-lo per obtenir un rendiment òptim.
  • Mantenir fora de l'abast dels nens.
  • No exposeu el dispositiu a temperatures o humitat extremes.
  • Si el dispositiu s'escalfa excessivament durant l'ús, interrompeu-ne el funcionament immediatament.

Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

  • BUTURE BC02 Jump Starter with Air Compressor
  • Bateria intel·ligent Clamps
  • Mànega d'aire
  • Nozzle Adapters (for various inflatables)
  • Cable de càrrega USB-C
  • Manual d'usuari
  • Bossa d'emmagatzematge

Configuració i càrrega inicial

Before first use, ensure the BUTURE BC02 is fully charged. The device features a large LED screen that displays the battery level.

  1. Connecteu el cable de càrrega USB-C proporcionat al port d'entrada USB-C del dispositiu.
  2. Connect the other end of the USB-C cable to a suitable USB wall adapter (not included) or car charger.
  3. The LED screen will indicate charging status and battery percentage. Charge until the screen shows 100%.
BUTURE BC02 charging and recharging devices

Figure 2: Charging the BC02 and using it as a power bank.

It is recommended to recharge the device every 3-6 months, even if not in use, to maintain battery health.

Instruccions de funcionament

1. Arrencada d'un vehicle amb ajuda d'un cable

The BUTURE BC02 can jump start vehicles with up to 9.0L gas engines and 8.0L diesel engines.

  1. Ensure the jump starter is sufficiently charged (at least 50% recommended).
  2. Introduïu la bateria intel·ligent clamp plug firmly into the jump starter's 12V output port. The indicator light on the clamp parpellejarà alternativament en vermell i verd.
  3. Connecteu el cl vermell (+).amp al terminal positiu (+) de la bateria del vehicle.
  4. Connecteu el negre (-) clamp al terminal negatiu (-) de la bateria del vehicle.
  5. Un cop connectat correctament, l'indicador lluminós del rellotge intel·ligentamp will turn solid green. If it flashes red or beeps, check connections or refer to the troubleshooting section.
  6. Engegueu el vehicle en 30 segons.
  7. Un cop el vehicle arrenqui, retireu immediatament el clauer intel·ligent.amp from the vehicle battery, then disconnect it from the jump starter.
Steps for jump starting a car battery

Figure 3: Easy steps to jump start your vehicle.

Funció d'inici forçat: If the battery is extremely low and the smart clamp does not show a solid green light, consult the troubleshooting section for instructions on using the force start function (if available and safe for your vehicle).

2. Using the 150PSI Air Compressor

The integrated air compressor can inflate tires and other inflatables up to 150 PSI with smart preset and auto-stop features.

  1. Premeu el botó d'engegada per encendre el dispositiu.
  2. Connect the air hose to the inflation port on the device and tighten it.
  3. Attach the other end of the air hose to the item you wish to inflate (tire valve, ball needle, etc.). Use the appropriate nozzle adapter if necessary.
  4. Short press the 'M' button to enter inflation mode.
  5. Press 'M' again to cycle through inflation modes (Car, Motorcycle, Bicycle, Ball, Custom) or 'U' to change pressure units (PSI, BAR, KPA).
  6. Utilitzeu els botons '+' i '-' per ajustar la pressió desitjada.
  7. Long press the power button for 3 seconds to start inflation. The compressor will automatically stop when the preset pressure is reached.
  8. Once inflation is complete, disconnect the air hose from the item and the device.
Step 1: Connect air hose to deviceStep 2: Select mode and set pressure on LED screenStep 3: Start inflation and auto-stop

Figure 4: Steps for using the air compressor.

Inflation Pressure Ranges:

  • Car: 26-51 PSI
  • Motorcycle: 26-44 PSI
  • Bicycle: 30-65 PSI
  • Ball: 4-16 PSI
  • Custom Inflation: 0-150 PSI
Inflation pressure ranges for different items

Figure 5: Recommended inflation ranges for various items.

3. Ús com a bateria externa portàtil

The BC02 can charge your electronic devices on the go.

  • Connect your device's charging cable to the USB-A output port (5V/2.4A) on the jump starter.
  • L'arrencador començarà a carregar el dispositiu automàticament.
  • The USB-C port can also be used for input (5V/2A, 9V/2A, 12V/1.5A) to recharge the jump starter itself.
BUTURE BC02 functioning as a portable power bank

Figure 6: Charging mobile devices with the BC02.

4. Emergency Lights

The device features a 500-lumen LED light with multiple modes for emergency situations.

  • Press the light button once for a steady flashlight.
  • Press again for white strobe light.
  • Press a third time for red strobe light (warning triangle).
  • Press a fourth time for SOS signal.
  • Press a fifth time to turn off the light.
BUTURE BC02 emergency light modes: flashlight, white strobe, red strobe, SOS

Figure 7: Emergency light functions.

Manteniment

  • Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni materials abrasius.
  • Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
  • Càrrega: Recharge the device every 3-6 months to maintain battery life, even if not in use.
  • Cura de la bateria: Eviteu descarregar completament la bateria amb freqüència.

Resolució de problemes

ProblemaCausa possibleSolució
Jump starter indicator light flashes red/green or beeps after connecting to battery.Incorrect connection (reverse polarity), battery voltage too low, or faulty battery.
  • Comproveu clamp connections to ensure red is on positive (+) and black is on negative (-).
  • Assegureu-vos que clamps are making good contact with battery terminals.
  • If battery is extremely low, try the "Force Start" function (if applicable, refer to device instructions for specific button combination, usually pressing and holding the 'Force Start' button until solid green light appears). Use with caution.
Vehicle does not start after jump starting.Vehicle battery is severely damaged, or other vehicle issues.
  • Attempt jump start again after 1-2 minutes.
  • If still unsuccessful, the vehicle may have other mechanical or electrical problems. Seek professional assistance.
Air compressor does not start or stops prematurely.Low battery, air hose not properly connected, or preset pressure reached.
  • Check device battery level and recharge if low.
  • Ensure air hose is securely tightened to both the device and the inflatable item.
  • Verify the preset pressure is higher than the current pressure.
  • Check for blockages in the air hose or nozzle.
El dispositiu no es carrega.Faulty cable, adapter, or charging port.
  • Prova un altre cable USB-C i/o adaptador de paret.
  • Ensure the cable is fully inserted into the charging port.

Especificacions

CaracterísticaDetall
ModelBC02
Corrent màxima> 1200 A
Capacitat de la bateria12000-18000 mAh (4 built-in batteries)
Taxa de conversió>90%
Jump Start CompatibilityMotors de gasolina de fins a 9.0 L / dièsel de 8.0 L
Pressió del compressor d'aireMàxim 150 PSI
Entrada USB-C5V/2A, 9V/2A, 12V/1.5A
Sortida USB-A5V/2.4A
Llum d'emergència500 Lumens (Flashlight, White Strobe, Red Strobe, SOS)
Certificació de proves externesWEEE, ROHS, FCC, CCC
Dimensions (aprox.)Llargada: 10 cm, Amplada: 5 cm, Alçada: 5 cm
Pes (aprox.)1.55 kg

Consells per a l'usuari

  • Always keep the jump starter charged, especially before long trips or during cold weather.
  • Familiarize yourself with the different inflation modes and pressure units before an emergency.
  • Store the device in an easily accessible location in your vehicle.
  • Test the emergency light functions periodically to ensure they are working.

Garantia i Suport

Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.

Documents relacionats - BC02

Preview Manual d'usuari de l'arrencador de botons i compressor d'aire BUTURE BR700
Comprehensive user manual for the BUTURE BR700 Jump Starter & Air Compressor, detailing safety warnings, package contents, product features, technical specifications, operation guide, troubleshooting, and warranty information.
Preview Manual d'usuari de l'arrencador de botons i compressor d'aire BUTURE BR700
Manual d'usuari complet per al BUTURE BR700, un arrencador de corrent màxim de 2500 A i compressor d'aire de 150 PSI. Coneix les seves característiques principals, el contingut del paquet, les especificacions tècniques, la guia d'operació i les precaucions de seguretat per a l'arrencada auxiliar de vehicles i dispositius de càrrega.
Preview Arrancador de càrrega BUTURE Beta06: Guia d'inici ràpid i informació de seguretat
Aquesta guia d'inici ràpid proporciona informació essencial per a l'arrencador de juntes BUTURE Beta06, que inclou avisos de seguretat, característiques del producte, instruccions de càrrega, inflat de pneumàtics, càrrega del dispositiu i consells de resolució de problemes per a propietaris de cotxes.
Preview Manual d'usuari de l'arrencador de botons i compressor d'aire BUTURE Beta01
Comprehensive user manual for the BUTURE Beta01 portable jump starter and air compressor. Learn how to use, maintain, and troubleshoot your device for car starting, tire inflation, and charging USB devices.
Preview Guia d'inici ràpid de l'arrencador portàtil BUTURE Beta08
Concise quick-start guide for the BUTURE Beta08 Portable Jump Starter. Learn how to charge the device, charge electronic devices, use the LED emergency light, jump start your car, and troubleshoot common issues. Includes safety warnings and compliance information.
Preview Arrancador portàtil BUTURE Beta08: Guia d'inici ràpid
Aquesta guia d'inici ràpid proporciona informació essencial per a l'arrencador portàtil BUTURE Beta08, inclòs el producte.view, charging instructions, how to jump-start a car, LED light functions, troubleshooting, and important safety warnings.