1. Introducció
Thank you for choosing the Jebao LP Series Fish Pond Garden Circulation Pump. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your pump. The LP Series pumps are designed for large-flow circulation in garden ponds and koi fish ponds, featuring high-efficiency asynchronous motors and durable components for long-lasting performance.
2. Instruccions de seguretat
AVÍS: Si no es segueixen aquestes instruccions de seguretat, es poden produir descàrregues elèctriques, incendis o lesions greus.
- This pump is designed for submersible use only in clean water. Do NOT use it to pump turbid sewage, corrosive liquids, or flammable materials.
- Assegureu-vos que la font d'alimentació voltage coincideix amb el volum nominal de la bombatage abans de la connexió.
- Desconnecteu sempre la bomba de la xarxa elèctrica abans de manipular-la, instal·lar-la o realitzar qualsevol manteniment.
- Do NOT operate the pump on dry land without water submersion. Dry running can cause severe damage to the motor and shaft.
- The pump is equipped with a 5-meter power cord. Do NOT modify or extend the power cord.
- Ensure the pump is placed on a stable, level surface within the pond.
- Keep children and pets away from the pond area when the pump is in operation.
- Regularly inspect the power cord for any damage. If damaged, discontinue use immediately and contact qualified personnel for repair.
3. Característiques
The Jebao LP Series pumps are engineered for optimal performance and longevity:
- High-Efficiency Asynchronous Motors: Designed for energy saving and powerful water circulation.
- Large Flow Rate: Ideal for effective filtration and circulation in garden and koi ponds.
- Particle Handling: Capable of suctioning dust particles up to 6mm in diameter, preventing clogging.
- Construcció duradora: Features a wear-resistant ceramic shaft and an ABS integrated molded impeller for extended service life and reduced daily wear.
- Cable d'alimentació llarg: Equipped with a 5-meter power cord for flexible placement.
4. Configuració i instal·lació
- Desembalatge: Carefully remove the pump and all accessories from the packaging. Inspect for any signs of damage.
- Col·locació: Position the pump on a stable, level surface at the bottom of your pond. Ensure it is fully submerged in clean water.
- Connexió: Connect the appropriate outlet pipe to the pump's discharge port. Ensure a secure, watertight connection.
- Connexió d'alimentació: Route the 5-meter power cord safely to a grounded electrical outlet. Ensure the outlet is protected by a Ground Fault Circuit Interrupter (GFCI) for safety. Do NOT plug in the pump until it is fully submerged.
- Comprovació inicial: Once fully submerged and connected, plug in the pump. Observe for proper water flow and listen for any unusual noises.
5. Instruccions de funcionament
Once installed and connected, operating the Jebao LP Series pump is straightforward:
- Encès: Plug the pump into a suitable, grounded electrical outlet. The pump will start circulating water immediately.
- Monitor de flux: Periodically check the water flow to ensure it is consistent and unobstructed.
- Funcionament continu: These pumps are designed for continuous operation in pond environments.
- Apagar: To stop the pump, simply unplug it from the electrical outlet. Always unplug before performing any work on the pump or pond.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba:
- Cleaning the Intake: The pump's intake is designed to handle particles up to 6mm. However, larger debris or excessive buildup can reduce efficiency. Periodically inspect and clean the intake screen to remove any accumulated debris.
- Inspecció de l'impel·lent: Disconnect power, then remove the pump's housing (refer to Figure 5 for screw fixation) to access the impeller. Check the impeller and ceramic shaft for any signs of wear, damage, or blockages. Clean any algae or mineral deposits.
- Shaft Maintenance: The ceramic shaft is wear-resistant, but ensure it remains free of debris and operates smoothly.
- Hivernització: In freezing climates, remove the pump from the pond before temperatures drop below freezing. Clean it thoroughly and store it in a frost-free location, submerged in a bucket of water if possible, to prevent seals from drying out.
7. Solució De Problemes
If your pump is not functioning correctly, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | No power; Impeller jammed; Motor failure | Check power connection and GFCI; Disconnect power and clear impeller; Contact support if motor fails |
| Reducció del cabal d'aigua | Clogged intake screen; Blocked impeller; Kinked hose | Disconnect power and clean intake/impeller; Straighten hose |
| La bomba fa un soroll inusual | Debris in impeller; Dry running; Worn components | Disconnect power and clear debris; Ensure pump is fully submerged; Inspect impeller/shaft for wear |
| La bomba s'atura de manera intermitent | Overheating (thermal overload); Power fluctuations | Allow pump to cool; Check power supply stability |
Si els passos de resolució de problemes no resolen el problema, poseu-vos en contacte amb l'atenció al client.
8. Especificacions
The Jebao LP Series offers various models with different performance characteristics:
| Model | Potència (W) | Flux (L/H) | Head (M) | Sortida (mm) | Certificació | Size (Diameter*Height) |
|---|---|---|---|---|---|---|
| LP-16000 | 40 | 16000 | 2.5 | 75 | CUL UL GS CE | 176*305 |
| LP-22000 | 50 | 22000 | 3.0 | 75 | CUL UL GS CE | 176*305 |
| LP-26000 | 75 | 26000 | 4.0 | 110 | CUL UL GS CE | 197*358 |
| LP-35000 | 100 | 35000 | 4.0 | 110 | CUL UL GS CE | 197*358 |
| LP-40000 | 150 | 40000 | 4.5 | 110 | CUL UL GS CE | 197*358 |
| LP-45000 | 200 | 45000 | 5.0 | 110 | CUL UL GS CE | 197*358 |
| LP-55000 | 300 | 55000 | 5.2 | 110 | CUL UL GS CE | 197*358 |
9. Consells d'usuari
- For optimal energy efficiency, ensure your pond's filtration system is regularly cleaned to reduce the workload on the pump.
- Consider the size of your pond and the required turnover rate when selecting a pump model to ensure adequate circulation and filtration.
- Always ensure the pump is fully submerged before powering it on to prevent damage from dry running.
- The 5-meter power cord provides ample length for most installations; avoid using extension cords if possible to minimize voltage drop and potential hazards.
10. Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official Jebao weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
