1. Introducció
This manual provides comprehensive instructions for the installation, programming, and operation of your new KUANGZIPENG Universal Multi-Frequency Receiver. This 2-channel device is designed to control various automation systems such as garage doors, electric gates, and other lifting equipment. It supports a wide range of remote control frequencies from 300MHz to 868MHz, including rolling, fixed, and learning codes, making it compatible with multiple brands.
2. Especificacions
| Característica | Especificació |
|---|---|
| Nom | Universal receiver |
| Vol. Operatiutage | CA/CC 9V-30V |
| Canals | 2 |
| Interval de freqüència | 300 MHz - 868 MHz |
| Freqüències suportades | 300MHz, 310MHz, 315MHz, 318MHz, 390MHz, 433.4MHz, 433MHz, 433.92MHz, 868MHz, 868.3MHz, 868.8MHz |
| Codis compatibles | Rolling Code (HCS301, HCS300, HCS200, HCS201, HCS100, HCS101), Fixed Code (2262, 2260, 2264, 5326, M1E, M5E), Learning Code (1527, 2240, 6P20B, 6P20D) |
| Distància | 30m-120m (zona oberta) |
| Dimensions | 56 mm x 46 mm x 20 mm |
| Capacitat de control remot | Up to 400 remote controls per receiver |
| Material | Metall i PVC |
| Certificació | CE |
3. Contingut del paquet
El paquet normalment inclou els elements següents:
- 1 x Universal Multi-Frequency Receiver
- 1 x antena
- 1 x Adhesive Pad (for mounting)
- Remote Controls (quantity varies by selected SKU, e.g., 1, 2, or 3)
4. Configuració
4.1 Selecció d'entrada de potència
The receiver operates on AC/DC 9V~30V. It is crucial to adjust the Power Input Selector (PIS) according to your power source:
- Si l'entrada voltage is greater than 24V, shorten pins 2 and 3.
- Si l'entrada voltage is less than 24V, shorten pins 1 and 2.
4.2 Esquema de cablejat
Connect the receiver to your motor or controller using the provided terminals. Ensure correct polarity for power (PWR, GND) and connect the control channels (CH1, CH2) to your device's input. Attach the antenna to the ANT terminal for optimal signal reception.
4.3 Brand Selection (Dip Switches)
The receiver features 8 dip switches that allow you to select the correct brand and frequency for your remote control. This ensures compatibility with a wide range of existing systems. Refer to the provided manual or the diagram below to set the dip switches according to your remote's specifications.
5. Programació
5.1 Programació de comandaments a distància
- Select Brand: Use the 8 dip switches to select the correct brand and frequency for the remote control you wish to program. For example, for 433.92MHz Rolling Code remotes, move Dip-switch 5 UP. Consult the detailed manual for specific settings.
- Prem el botó Aprèn: Press the 'learn' button on the receiver. The LED indicator will turn on.
- Programa remot: Press the desired button on your remote control. The receiver's LED will flash 4 times, indicating that the remote control has been successfully programmed.
- Repetiu per a botons addicionals: If your remote has multiple buttons you wish to program, repeat step 2 for each additional button.
- Segon canal: The programming procedure for the second channel is identical.
5.2 Erasing All Data
To erase all programmed data from the receiver's memory:
- Press and hold either of the 'learn' buttons on the receiver.
- The LED indicator will start to flash. Continue holding the button until the LED turns off.
- All saved data in the memory card will be permanently erased and cannot be recovered.
5.3 Programming Demonstration Video
6. Funcionament
Once your remote control is successfully programmed, simply press the corresponding button on the remote to activate the connected device. The remote control transmitter features a modern, stylish, and compact design, an LED indicator, and includes a key ring and battery for convenience.
The receiver is designed for broad applications, including replacing old garage control systems or adding more remotes to existing garage doors and gates.
7. Manteniment
- Keep the receiver and remote controls clean and dry. Use a soft, dry cloth for cleaning.
- Avoid exposing the devices to extreme temperatures, high humidity, or direct sunlight.
- If the remote control's range decreases or it stops responding, replace the battery.
- Ensure the receiver's antenna is fully extended and unobstructed for optimal performance.
8. Solució De Problemes
- El comandament a distància no funciona després de la programació:
- Check that the receiver is powered on (LEDs L1/L2 should be lit).
- Verify that the dip switch settings on the receiver correctly match the brand and frequency of your remote control.
- Ensure the remote control's battery is not depleted.
- Attempt the programming procedure again carefully.
- Rang de funcionament limitat:
- Ensure the receiver's antenna is properly connected and fully extended.
- Check for any physical obstructions between the remote and the receiver.
- Substitueix la pila del comandament a distància.
- Interferències amb altres dispositius:
- The receiver is designed not to interfere with other remotes and receivers. If interference is suspected, check for other strong radio frequency (RF) sources nearby that might be causing disruption.
9. Consells d'usuari
- Always double-check the dip switch settings against your existing remote's specifications before programming for optimal compatibility.
- For best signal reception, ensure the receiver's antenna is extended and not obstructed by metal objects or walls.
- Keep a record of your dip switch settings for future reference, especially if you have multiple remote types.
10. Garantia i Suport
For any issues, technical support, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
