1. Introducció
This manual provides essential information for the safe and efficient operation of your ANENJI 6.2KW or 11KW 48V Hybrid Solar Inverter. This advanced inverter is designed for both on-grid and off-grid applications, featuring a pure sine wave output and an integrated MPPT solar charge controller. Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Característiques clau
- Pure Sine Wave Output (Max 8500W/11000W)
- High PV Input Voltage Range (60-500VDC)
- Integrated MPPT Solar Charge Controller (120A for 6.2KW, 140A/160A for 11KW)
- Capable of working without a battery
- Lithium battery activation function (triggerable by mains or PV)
- WiFi APP controller for remote monitoring
- RS485 and RS232 Communication interfaces
- Support for PACE, PYLON, Growatt communication protocols (BMS)
- Factor de potència de sortida 1.0
- Real Hybrid Grid Solar Inverter for 48V systems
- Bundled monitoring and setting software
- Supports 50Hz or 60Hz operation (program adjustable)
- Compatible with AC grid or generator power input
- Timer setting for AC charging and output
- Kit antipols integrat per a entorns durs
- Optional DC output for DC loads (e.g., fans, routers)
- Dual Load Output (V2.0)
- Two PV Inputs (for parallel connection, ensure same number of solar panels in series on each side)
- MPPT dual per a una captació solar optimitzada
- Supports Grid Feedback for on-grid and off-grid operation (requires battery)
3. Informació de seguretat
Please observe the following safety precautions during installation, operation, and maintenance:
- All electrical work must be performed by qualified personnel in accordance with local electrical codes.
- Assegureu-vos que l'inversor estigui correctament connectat a terra.
- Do not attempt to open or repair the inverter yourself. Refer all servicing to qualified service personnel.
- Mantingueu l'inversor allunyat de materials inflamables, humitat i llum solar directa.
- Assegureu-vos que hi hagi una ventilació adequada al voltant de l'inversor per evitar el sobreescalfament.
- Before performing any maintenance or cleaning, disconnect all power sources (PV, battery, AC grid).
- Utilitzeu l'equip de protecció individual (EPI) adequat quan treballeu amb sistemes elèctrics.
4. Contingut del paquet
En desempaquetar, comproveu que hi hagi tots els elements que s'enumeren a continuació:
- ANENJI Hybrid Solar Inverter Unit (x1)
- External WiFi Module (x1)
- Manual d'usuari (x1)
5. Especificacions
5.1. Model: ANJ-6200W-48V-WIFI
| Categoria | Paràmetre | Valor |
|---|---|---|
| Model | Número de model | ANJ-6200W-48V-WIFI |
| Potència nominal | 6200W | |
| Tipus de sortida | SIMPLE | |
| Entrada | Entrada Voltage | 230 VCA |
| Interval de freqüència | 50/60HZ Auto sensing | |
| Acceptable Voltage Rang | 170-280VAC (For Personal Computer); 90-280VAC (For Home Appliances) | |
| Màx. Corrent d'entrada solar | 27A | |
| Sortida | Potència nominal | 6500VA/6200W |
| Potència de sobretensió | 6500VA | |
| Forma d'ona | Ona sinusoïdal pura | |
| Sortida AC Voltage Reglament | 230VAC ± 5% | |
| Freqüència de sortida | 50/60HZ Auto sensing | |
| Temps de transferència | 10ms (For Personal Computers), 20ms (For Home Appliances) | |
| Bateria | Voltage | 48VDC |
| Càrrega flotant Voltage | 54VDC | |
| Protecció de sobrecàrrega | 61VDC | |
| Carregador solar | Potència màxima de matriu fotovoltaica | 6500W |
| Volum màxim de circuit obert de la matriu fotovoltaicatage | 500VDC | |
| MPPT Range Operation Voltage | 60-500VDC | |
| Corrent de càrrega solar màxima | 120A | |
| Física | Dimensió (D * W * H) | 438x295x105mm (43.8X29.5X10.5CM) |
| Pes | 10 kg | |
| Interfície de comunicació | RS232/RS485 (Standard), GPRS/WIFI | |
| Medi ambient | Temperatura de funcionament | -10 ℃ a 55 ℃ |
| Temperatura d'emmagatzematge | -15 ℃ a 60 ℃ | |
| Humitat | 5% a 95% d'humitat relativa (sense condensació) |
5.2. Models: ANJ-HHS-8500W-48V-Wifi, ANJ-HHS-11KW-48V-Wifi
| Paràmetre | ANJ-HHS-8500W-48V-Wifi | ANJ-HHS-11KW-48V-Wifi | |
|---|---|---|---|
| Màx. Potència d'entrada fotovoltaica | 10KW | 11KW | |
| Capacitat paral·lela | NO | NO | |
| Activació de la bateria de liti | SÍ (Per fotovoltaica o servei públic) | ||
| Comunicació de la bateria de liti | SÍ (RS485) | ||
| Entrada | Volum nominaltage | 230 VCA | |
| Acceptable Voltage Rang | 170-280 V CA (per a ordinador personal); 90-280 V CA (per a electrodomèstics) | ||
| Freqüència | 50/60Hz Auto sensing | ||
| Sortida | Volum nominaltage | 220/230 / 240VAC | |
| Potència de sobretensió | 17000VA | 22000VA | |
| Forma d'ona | Onda senyal pura | ||
| Temps de transferència | 10ms (for Personal Computer), 20ms (for Home Appliances) | ||
| Factor de potència admissible | 0.6-1 (inductiu o capacitiu) | ||
| Bateria | Voltage | 48VDC | |
| Càrrega flotant Voltage | 54VDC | ||
| Protecció de sobrecàrrega | 63VDC | ||
| Carregador solar i carregador de CA | Tipus de carregador solar | MPPT | |
| Màx. Potència de matriu fotovoltaica | 5000 W * 2 | 5500 W * 2 | |
| PV Array MPPT Voltage Rang | 60 VDC-500 VDC | ||
| Màx. Corrent de càrrega solar | 140A | 160A | |
| Física | Dimensions (D*W*H) | 540*415*122 | |
| Pes net (kg) | 14 | 15 | |
| Interfície de comunicació | RS232/RS485/Dry Contact | ||
| Medi ambient | Temperatura de funcionament | -10 ℃ a 50 ℃ | |
| Temperatura d'emmagatzematge | -15 ℃ a 60 ℃ | ||
| Humitat | 5% a 95% d'humitat relativa (sense condensació) | ||
6. Instal·lació i configuració
6.1. Identificació de components
6.2. PV Module Selection
When choosing PV modules, ensure the following parameters are considered:
- The open circuit (Voc) voltage of the photovoltaic module must not exceed the maximum PV array open circuit voltage de l'inversor (500 V CC).
- The open circuit (Voc) voltage of the photovoltaic module should be higher than the minimum battery voltage.
6.3. Connexió de la bateria
The inverter operates with a 48VDC battery system. For the 6.2KW model, a minimum battery capacity of 200Ah is recommended.
6.4. Diagrama de cablejat del sistema
The inverter can be integrated into various power systems, including solar panels, utility grid, generator, and battery storage, to power home loads. Ensure all connections are secure and correctly polarized.
Nota: If operating without an external battery, the voltage from the solar panel must be above 150VDC for the inverter to function normally. If an external battery is connected, 120VDC is sufficient.
7. Funcionament
7.1. Display and Control Buttons
The inverter features an LCD display, charging indicator, status indicator, fault indicator, and function buttons (ESC, UP, DOWN, ENTER) for monitoring and configuration.
7.2. Modes de funcionament
The inverter supports multiple output priority settings, including UTL (Utility first), SOL (Solar first), SBU (Solar-Battery-Utility), and SUB (Solar-Utility-Battery). These modes allow you to optimize power usage based on your specific needs and available power sources.
7.3. WiFi Remote Monitoring
Connect the external WiFi module to enable remote monitoring of your inverter's performance via a dedicated mobile application. This allows you to track energy production, consumption, and system status from anywhere.
7.4. Configuració del temporitzador
The inverter allows for programmable timer settings for AC charging and output, providing flexibility in managing your energy flow and optimizing battery charging cycles.
8. Manteniment
Un manteniment regular garanteix la longevitat i el rendiment òptim del vostre inversor:
- Neteja: Periodically clean the exterior of the inverter with a dry cloth. Ensure ventilation openings are free from dust and debris. The detachable dust cover can be removed for cleaning in harsh environments.
- Inspecció: Regularly check all wiring connections for tightness and signs of corrosion. Inspect the inverter for any physical damage or unusual noises.
- Salut de la bateria: If using batteries, monitor their health and ensure they are properly charged and maintained according to the battery manufacturer's guidelines.
- Actualitzacions de programari: Check for any available software or firmware updates for the inverter and WiFi module to ensure optimal performance and access to new features.
9. Solució De Problemes
This section covers common issues you might encounter. For more complex problems, please contact technical support.
9.1. Sense sortida de potència
- Check if the inverter's power switch is ON.
- Verify that the battery is connected and charged (if applicable).
- Assegureu-vos que l'entrada PV voltage is within the operational range (above 150VDC without battery, 120VDC with battery).
- Check AC input from utility grid or generator.
- Inspect all circuit breakers and fuses.
9.2. Inverter Displaying Error Codes
- Consulteu el codi d'error específic al manual d'usuari complet per obtenir explicacions i solucions detallades.
- Common errors relate to over-voltage, baix voltage, overload, or short circuits.
- Disconnect loads and power sources, then restart the inverter.
9.3. WiFi Monitoring Issues
- Ensure the external WiFi module is securely connected to the inverter.
- Verify your home WiFi network is active and the inverter is within range.
- Check the WiFi module's indicator lights for status.
- Restart the WiFi module and the inverter.
10. Consells d'usuari
- Optimitzar l'entrada fotovoltaica: For optimal performance, especially when operating without a battery, ensure your PV array's open circuit voltage consistently stays above 150VDC.
- Compatibilitat de la bateria: The inverter is compatible with LiFePO4 batteries via RS485 communication, allowing for enhanced battery management and performance.
- Monitorització remota: Utilize the WiFi module and mobile app to keep a close eye on your system's performance and quickly identify any potential issues.
11. Garantia i Suport
For warranty information, technical support, or service requests, please contact your original point of purchase or the ANENJI customer service department. Ensure you have your product model number and purchase details available when contacting support.