1. Introducció
The JK-P10 Paper Moisture Meter is a high-precision, portable instrument designed for quick and accurate measurement of moisture content in various paper and cardboard products. Utilizing high-frequency electromagnetic scanning, it provides stable performance and reliable readings, making it an essential tool for quality control and material inspection.
2. Components i dimensions del producte
Familiarize yourself with the main components of your JK-P10 Moisture Meter:
- Inductive Probe: The sensing element that measures moisture.
- Pantalla de visualització: LCD digital display for showing moisture readings.
- Zero Adjustment Knob: Used to calibrate the meter to zero.
- Tecla ON/OFF: Encén o apaga el dispositiu.
- Gear/Range Knob: Selects the appropriate measurement range (0-10).
Dimensions:
- Longitud: 185 mm
- Width (top): 65 mm
- Width (bottom): 63 mm
- Probe Width: 31 mm
3. Configuració
- Instal·lació de la bateria: Open the battery compartment and insert a 9V (6F22 type) battery, ensuring correct polarity.
- Encès: Press the "ON/OFF" key to turn on the device. The LCD display should light up.
- Calibratge zero: Before taking measurements, ensure the meter is calibrated to zero. With no material under the probe, turn the "Zero Adjustment Knob" until the display reads "00.0" or as close to zero as possible.
4. Instruccions de funcionament
- Seleccioneu l'interval: Use the "Gear/Range Knob" to select an appropriate range (0-10) for the material being tested. Start with a lower range and adjust as needed.
- Place Probe: Gently place the inductive probe flat against the surface of the paper or cardboard material you wish to measure. Ensure full contact between the probe and the material.
- Llegir mesura: The moisture content will be displayed on the LCD screen within approximately 1 second.
- Repetir mesures: For best accuracy, take several measurements at different points on the material and average the results.
- Apagar: After use, press the "ON/OFF" key to turn off the device to conserve battery life.
5. Manteniment
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Emmagatzematge: Store the meter in a dry, cool place away from direct sunlight and extreme temperatures.
- Substitució de la bateria: If the display becomes dim or the meter does not power on, replace the 9V battery. Remove the battery if the device will not be used for an extended period to prevent leakage.
- Cura de la sonda: Keep the inductive probe clean and free from debris to ensure accurate readings.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El mesurador no s'encén. | Bateria morta o instal·lada incorrectament. | Comproveu la polaritat de la pila o substituïu-la per una pila nova de 9 V. |
| Lectures inexactes. |
|
|
| La pantalla està tènue o parpelleja. | Potència de bateria baixa. | Substituïu la bateria de 9V. |
7. Especificacions
| Paràmetre | Valor |
|---|---|
| Interval de mesura | 0-100% |
| Resolució | 0.1% |
| Temps de mesurament | 1 segon |
| Precisió | 0.5% |
| Profunditat d'escaneig | 50 mm |
| Selecció de rang | 0-10 gears/ranges |
| Principi de funcionament | High-frequency electromagnetic scanning |
| Entorn de funcionament | -40 °C a +60 °C |
| Mètode de visualització | Pantalla digital LCD |
| Font d'alimentació | 9V (6F22 type) battery |
| Dimensions (L x A x A) | 185 mm x 63 mm x 32 mm |
| Pes | 200 grams |
8. Consells d'usuari
- For consistent results, always perform zero calibration before each measurement session or if the ambient conditions change significantly.
- When measuring, ensure the probe is placed firmly and evenly on the material to avoid air gaps that could affect accuracy.
- If measuring very thin materials, stacking multiple layers might provide a more stable reading, but remember to consider the material's density.
9. Garantia i Suport
This product is typically covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly.
Keep your purchase receipt or order number handy when contacting support.
