1. Producte acabatview
The Thermalright TL-C12C-S X5 is a high-performance 120mm computer case fan designed for efficient cooling and vibrant ARGB lighting. It features a 9-blade design, Fluid Dynamic Bearing (FDB) for quiet operation and long life, and supports PWM control for precise speed adjustment. The fan is suitable for use in computer cases and radiators.
2. Contingut del paquet
Si us plau, comproveu el paquet per veure si hi ha els elements següents:
- Thermalright TL-C12C-S X5 Fan(s)
- Cargols de muntatge
- Manual d'usuari (aquest document)
3. Guia d'instal·lació
3.1 Muntatge del ventilador
- Identify the desired mounting location in your PC case or on your radiator. Ensure proper airflow direction (typically, the side with the fan hub label is exhaust).
- Align the fan with the screw holes.
- Use the provided mounting screws to secure the fan. The fan features silicone foot pads for vibration reduction.
3.2 Connexió dels cables
The TL-C12C-S X5 fan has two main connectors:
- 4-Pin PWM Connector: Connect this to an available 4-pin fan header on your motherboard. This allows for Pulse Width Modulation (PWM) control of the fan speed.
- +5V 3-Pin ARGB Connector: Connect this to an available +5V 3-pin Addressable RGB (ARGB) header on your motherboard. Do NOT connect this to a 12V 4-pin RGB header, as this may damage the fan's LEDs.
The fan supports series control for PWM and ARGB, allowing multiple fans to be connected and controlled from a single header using appropriate splitters (not always included).
4. Funcionament
4.1 Control de velocitat del ventilador (PWM)
The fan speed can be controlled via the motherboard's BIOS/UEFI settings or through motherboard software. The fan operates within a range of 0 to 1550 RPM (±10%). Adjusting the PWM signal allows you to balance cooling performance and noise levels.
4.2 Control d'il·luminació ARGB
The ARGB lighting can be controlled through your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller (if purchased separately). The fan supports up to 17 ARGB color flow modes, allowing for extensive customization of lighting effects.
5. Manteniment
To ensure optimal performance and longevity of your fan, periodic maintenance is recommended:
- Neteja de pols: Regularly clean dust accumulation from the fan blades and frame using compressed air or a soft brush. Ensure the fan is powered off before cleaning.
- Coixinet: The S-FDB (Fluid Dynamic Bearing) is designed for long-term, maintenance-free operation. No lubrication is required.
6. Solució De Problemes
- El ventilador no gira:
- Check if the 4-pin PWM connector is securely plugged into the motherboard fan header.
- Verify that the fan header is enabled in the motherboard's BIOS/UEFI settings.
- Assegureu-vos que la font d'alimentació funcioni correctament.
- ARGB Lights Not Working/Incorrect Colors:
- Confirm the +5V 3-pin ARGB connector is correctly plugged into a +5V 3-pin ARGB header on the motherboard, not a 12V 4-pin RGB header.
- Check your motherboard's ARGB software for proper configuration and effects.
- Ensure all ARGB connections are secure, especially if using splitters or daisy-chaining multiple fans.
- Soroll excessiu:
- Comproveu si hi ha cables o obstruccions que toquin les aspes del ventilador.
- Ensure the fan is securely mounted and screws are tightened.
- Dust accumulation can cause imbalance and noise; clean the fan thoroughly.
- Adjust fan speed settings in BIOS/UEFI or software to a lower RPM if noise is a concern.
7. Especificacions
| Atribut | Valor |
|---|---|
| Mida del producte | L120 mm x W120 mm x H25 mm |
| Pes | 120 g |
| Velocitat nominal | 1550 RPM±10% (MAX) |
| Nivell de soroll | 25.6 dBA (MAX) |
| Flux d'aire | 66.17 CFM (MÀX) |
| Pressió de l'aire | 1.53 mm H2O (MÀX) |
| Ampere | 0.20 A |
| Voltage | 12V DC |
| Interfície de ventilador | PWM de 4 pins |
| Interfície ARGB | +5V 3PIN |
| Tipus de rodament | S-FDB Bearing |
| Vida de fan | 100000 h |
| Quantitat de fulles | 9 |
| Usat per | Caixa, radiador |
| Certificacions | CE, RoHS |
8. Garantia i Suport
The Thermalright TL-C12C-S X5 fan comes with a 3 any de garantia on its S-FDB bearings, ensuring long-term reliability. For technical support, warranty claims, or further assistance, please contact Thermalright customer service through their official weblloc o distribuïdors autoritzats.
9. Consells d'usuari
- Direcció del flux d'aire: Pay attention to the arrows on the fan frame indicating airflow direction and blade rotation. Install fans to create a balanced intake and exhaust system for optimal cooling.
- Gestió de cables: Utilize the generous 55cm cable length for neat cable routing, which can improve airflow and aesthetics inside your PC case.
- ARGB Synchronization: For a cohesive lighting setup, ensure all ARGB components are connected to the same controller or motherboard software for synchronized effects.
- Fan Curve Optimization: Experiment with different fan curves in your motherboard's software to find the best balance between cooling performance and acoustic comfort for your specific system.
