Introducció
The SmallRig Camera Battery Charger is designed for photographers requiring efficient and reliable power solutions. This dual-slot charger supports simultaneous charging of two batteries, ensuring your equipment is always ready. It is compatible with both original and third-party batteries for a wide range of camera models. Equipped with intelligent circuitry, the charger provides multiple safety protections to safeguard your batteries and device. Its compact design and versatile USB-C input make it an ideal companion for travel and on-location shoots.
Contingut del paquet
- Camera Battery Charger x 1
- 60W USB-C to USB-C Cable (1m / 3.3ft) x 1
Compatibilitat
The SmallRig Camera Battery Charger is available in several models, each designed for specific battery types:
- ID 5489: Compatible with Sony NP-FZ100 batteries.
- ID 5490: Compatible with Canon LP-E6P, LP-E6NH, LP-E6N, and LP-E6 batteries.
- ID 5491: Compatible with Nikon EN-EL15c batteries.
- ID 5492: Compatible with Panasonic DMW-BLK22 batteries.
- ID 5493: Compatible with Sony NP-FW50 batteries.
Detailed compatibility lists for specific camera models:
- Compatible with Sony NP-FZ100: Alpha 6600, 9il, 7i kaw, 7ri kaw, 1, 7c, 7si kaw, 7riv, 7RV, 6700, 7CR, 7C II, 7 IV, 1 II, FX3, FX30, ZV-E1, ZV-E10 II.
- Compatible with Sony NP-FW50: Alpha 7 II, 6100, 6400, Alpha 7S II, 7R, 6500, 6000, 7, 5100, 6300, 7S, 7R II, ZV-E10, 5000, DSC-RX10M2, RX10M3, RX10, RX10M4, ILCE-QX1.
- Compatible with Canon LP-E6P: EOS 5D Mark II, 5D Mark III, 5D Mark IV, 6D, 60D, 60Da, 6DMark II, 7D, 7DMark II, 70D, 80D, 90D, XC10, XC15, 5DS, 5DSR, R, R5, R6, R5C, R7, R6 Mark II, R5 Mark II.
- Compatible with Nikon EN-EL15c: Z8, Z7II, Z7, Z6II, Z6, Z5, D850, D810, D810A, D780, D750, D610, D500, D7500, D7200, Zf, Z6i kawakl, D780, D750, D610, D500, D7500, D7200, Zf, Z6 i chuan l, Zr.
- Compatible with Panasonic DMW-BLK22: GH7, GH6, GH5 II, S9, G9 II, S5 IIX, S5 II, S5.
Configuració
- Connectar l'alimentació: Insert the provided USB-C to USB-C cable into the charger's USB-C input port. Connect the other end of the cable to a compatible power adapter. It is recommended to use a power adapter with 22.5W or higher output for optimal performance. Note that 5V / 1A power adapters are not supported.
- Insereix les piles: Carefully insert your camera batteries into the designated charging slots. The charging port features a spring structure to ensure a secure connection and prevent accidental disconnection.
Instruccions de funcionament
Càrrega de bateries
Once batteries are inserted and the charger is connected to power, the charging process begins automatically. The charger's dual-slot design allows for simultaneous charging. Two batteries can be fully charged in approximately 2 hours with an appropriate power adapter.
Comprovació del nivell de la bateria
You can check the battery level at any time by single-clicking the button located on the charger.
Llums indicadors LED
The charger features five LED indicators per channel to display battery status:
- Idle Mode (Battery level display when not charging):
- 0-10%: 1 red LED (steady)
- 10-20%: 1 white LED
- 20-40%: 2 white LEDs
- 40-60%: 3 white LEDs
- 60-80%: 4 white LEDs
- 80-100%: 5 white LEDs
- Mode de càrrega: White LEDs flash to show the current charge level; steady white LEDs indicate the fully charged level.
- Mode d'error: The first LED of both channels will flash red and white alternately if the charger is overheated. Charging will automatically resume when the temperature returns to a safe range.
Mode de càrrega lenta
When using a 5V / 2.4A adapter, the charger will operate in a slow-charge mode. In this mode, the device will first charge the battery in Channel 1. Once Channel 1 is fully charged, it will automatically switch to Channel 2 to continue charging.
Manteniment
- Keep the charger clean and dry. Use a soft, dry cloth to wipe the surface.
- Avoid exposing the charger to extreme temperatures, direct sunlight, or high humidity.
- Guardeu el carregador en un lloc fresc i sec quan no l'utilitzeu.
- No intenteu desmuntar ni reparar el carregador vosaltres mateixos. Poseu-vos en contacte amb el servei d'atenció al client si sorgeixen problemes.
Resolució de problemes
- El carregador no s'encén: Ensure the USB-C cable is securely connected to both the charger and a compatible power adapter. Verify the power adapter is functioning and provides at least 22.5W output (5V/1A adapters are not supported).
- Bateries que no es carreguen: Check that the batteries are inserted correctly into their respective slots. Confirm the power adapter meets the recommended specifications.
- Overheating warning (LEDs flashing red/white): If the charger detects overheating, it will temporarily stop charging and indicate this with flashing red and white LEDs. Disconnect the charger from power and allow it to cool down in a well-ventilated area. Charging will resume automatically once a safe temperature is reached.
- Càrrega lenta: If charging seems slow, ensure you are using a power adapter with 22.5W or higher output. Using a 5V/2.4A adapter will result in slow charging, with Channel 1 prioritizing charging before Channel 2.
Especificacions
| Característica | Descripció |
|---|---|
| Material(s) | PC + ABS |
| Entrada USB-C | 5V / 2.4A, 9V / 2A, 12V / 1.75A, 15V / 1.5A; 22.5W (Max) |
| Protocol USB-C | PD3.0, QC2.0, QC3.0 |
| Rated Output (Per Channel) | 8.4 V / 1 A |
| Temperatura de funcionament | De 0 °C a 45 °C / 32 °F a 113 °F |
| Tipus d'accessoris de fotografia | Carregador de bateria |
| Elèctric | No |
| paquet | Sí |
| Origen | Xina continental |
Product Dimensions & Weight (by Model ID)
| Identificador del model | Dimensions del producte (L x A x A) | Pes del producte |
|---|---|---|
| 5489 (for NP-FZ100) | 83.2 x 63.9 x 26.8mm / 3.3 x 2.5 x 1.1in | 45g ±5g / 1.8oz ±0.2oz |
| 5490 (for LP-E6P) | 88.9 x 69.2 x 26.0mm / 3.5 x 2.7 x 1.0in | 55g ±5g / 2oz ±0.2oz |
| 5491 (for EN-EL15c) | 89.1 x 68.3 x 23.9mm / 3.5 x 2.7 x 0.9in | 47g ±5g / 1.7oz ±0.2oz |
| 5492 (for DMW-BLK22) | 84.8 x 70.0 x 29.9mm / 3.3 x 2.8 x 1.2in | 57g ±5g / 2oz ±0.2oz |
| 5493 (for NP-FW50) | 72.9 x 57.1 x 22.5mm / 2.9 x 2.2 x 0.9in | 32g ±5g / 1.1oz ±0.2oz |
Consells per a l'usuari
- For optimal charging speed and efficiency, always use a power adapter with an output of 22.5W or higher.
- If you notice slow charging, check your power adapter. A 5V/2.4A adapter will engage slow-charge mode, prioritizing one battery at a time.
- Keep an eye on the LED indicators for quick status checks, especially the red LED for critically low battery levels.
- The compact size makes it easy to carry; ensure batteries are securely seated to prevent accidental disconnections during transport.
Garantia i Suport
For detailed warranty information, technical support, or service inquiries, please refer to the official SmallRig weblloc web o contacteu directament amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
