ETENWOLF S1 Portable Air Compressor

1. Introducció

The ETENWOLF S1 is a compact, lithium-powered multi-function tire inflator designed for passenger cars, SUVs, crossovers, motorcycles, and bicycles. This portable device offers high-speed inflation and features a robust battery, making it an essential tool for on-the-go tire maintenance.

Les característiques clau inclouen:

• Powerful 5200mAh (2x 2600mAh) built-in lithium battery.
• High-speed inflation at 20 L/min (0.65 CFM) at 0 PSI.
• Maximum inflation pressure of 160 PSI (11.0 bar).
• 100% duty cycle for continuous operation without cool-down breaks.
• Universal USB-C port with 10W PD fast charging support.
• Integrated air hose storage for a truly portable, all-in-one design.
• Built-in work light with multiple modes (illumination, slow-speed strobe, SOS).
• Dual tire pressure display and 4 preset inflation modes.

2. Contingut del paquet

Marqueu la casella per als elements següents:

• S1 Multi-Function Tire Inflator x1
• Cable de càrrega USB-A a USB-C x1
• T-shaped Quick Connector x1
• French Copper Adapter x1
• Ball Needle x1
• Bossa d'emmagatzematge x1
• Manual d'instruccions x1

3. Producte acabatview

Familiarize yourself with the components and controls of your ETENWOLF S1 inflator:

1. Indicador de mode manual
2. Car Mode Indicator
3. Bicycle Mode Indicator
4. Ball Mode Indicator
5. Pressure Unit Display (BAR, PSI, KPA)
6. Target Value Display
7. Actual Pressure Value Display
8. Icona d'avís de seguretat
9. Barra de progrés
10. Indicador de nivell de bateria
11. Pressure Increase Button (+)
12. Pressure Decrease Button (-)
13. Start/Pause Power Button
14. Botó de llum
15. Mode Button (for switching units)
16. Connexió de mànega d'alta pressió
17. Llum LED
18. Type-C Port (Type-C)

4. Especificacions

5. Càrrega del dispositiu

The ETENWOLF S1 is equipped with a built-in 5200mAh lithium battery. To charge the device:

1. Connect the provided USB-A to USB-C charging cable to the Type-C port (18) on the inflator.
2. Connect the other end of the cable to a compatible USB power adapter (not included). For optimal charging speed, use a 10W PD fast charging adapter.
3. The battery level indicator (10) on the display will show the charging status. Ensure the device is fully charged before first use for best performance.

6. Funcionament

6.1. Encendre/apagar

• To power on: Press and hold the Start/Pause Power Button (13).
• To power off: Press and hold the Start/Pause Power Button (13) again. The device will also auto-shutoff after a period of inactivity.

6.2. Selecting Inflation Mode and Unit

The S1 offers four preset inflation modes and a custom mode:

• Press the Mode Button (15) to cycle through the preset modes: Car (2), Bicycle (3), Ball (4), and Manual (1).
• Each mode has a default target pressure:
• Mode bicicleta: Default 45 PSI (approx. 120 seconds for bicycle tire inflation). Use with French Valve Adapter if needed.
• Mode de pilota: Default 7-9 PSI (approx. 10 seconds for ball inflation). Use with Ball Needle.
• Mode cotxe: Default 32-41 PSI (approx. 107 seconds for 195 car tire). Use with T-shaped Quick Connector.
• Custom Mode (Manual Mode): Range 3-160 PSI, default 30 PSI. Allows you to set any desired pressure within the range.
• To change the pressure unit (PSI, BAR, KPA), press and hold the Mode Button (15).

6.3. Establiment de la pressió objectiu

• After selecting a mode, use the Pressure Increase Button (11) and Pressure Decrease Button (12) to adjust the target pressure (6) to your desired value.

6.4. Procés d'inflació

1. Connect & Power On: Attach the high-pressure hose to the inflator's connection port (16) and then securely connect the appropriate adapter to the tire valve. Press the power button (13) to turn on the device.
2. Set Mode & Unit: Select the desired inflation mode (Car, Bike, Ball, or Manual) using the Mode Button (15). Adjust the pressure unit if necessary.
3. Establir la pressió objectiu: Use the '+' (11) and '-' (12) buttons to set your target pressure.
4. Comença a inflar: Press the Start/Pause Power Button (13) to begin inflation. The actual pressure value (7) and progress bar (9) will be displayed.
5. Parada automàtica: L'inflador s'aturarà automàticament un cop s'assoleixi la pressió objectiu.
6. Disconnect the hose from the tire valve and then from the inflator.

6.5. Using the Work Light

The built-in LED Light (17) can be used for illumination in low-light conditions:

• Press the Light Button (14) once for constant illumination.
• Press again for Slow-Speed Strobe Light.
• Press a third time for SOS Light.
• Premeu una quarta vegada per apagar la llum.

7. Informació de seguretat

The ETENWOLF S1 is designed with a Multi-Shield Protection System to ensure safe operation:

• Protecció del motor: Prevents motor damage from overheating or over-usage.
• Low-Temp Charging Protection: Ensures safe charging in cold environments.
• High-Temp Charging Protection: Prevents battery damage from overcharging at high temperatures.
• Low-Temp Discharge Protection: Protects the battery from damage during discharge in cold conditions.
• High-Temp Discharge Protection: Prevents battery damage from excessive heat during operation.
• Overvoltage Protecció: Safeguards the device from voltage pics.
• Cell Protection: Protects the internal battery cells from various electrical faults.
• Volum alttage Protecció: Ensures safe operation under high voltage condicions.

Always ensure the hose is securely connected before inflation. Do not leave the inflator unattended during operation. Keep out of reach of children.

8. Manteniment

• Neteja: Netegeu el dispositiu amb un suau, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
• Emmagatzematge: Store the inflator in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the hose is properly stored in its integrated compartment.
• Cura de la bateria: Per a una durada òptima de la bateria, carregueu el dispositiu regularment, fins i tot si no l'utilitzeu amb freqüència. Eviteu descarregar completament la bateria durant períodes prolongats.
• Inspecció de la mànega: Periodically check the inflation hose and connectors for any signs of wear, cracks, or damage. Replace if necessary.

9. Solució De Problemes

10. Consells d'usuari

• Always check the recommended tire pressure for your vehicle or item before inflation. This information is usually found on a sticker inside the car door jamb, in the vehicle's manual, or on the item itself.
• For faster inflation, ensure the device is fully charged.
• When inflating, connect the hose to the tire valve first, then to the inflator, to minimize air loss.
• The integrated work light is useful for nighttime emergencies or working in dimly lit areas.

11. Garantia i Suport

For any after-sales inquiries, technical support, or warranty claims, please contact the ETENWOLF customer service team. Refer to your purchase documentation for specific contact details or visit the official ETENWOLF weblloc.

We are committed to providing you with professional and efficient service!