MACHINIST H61C LGA 1155 Motherboard Kit User Manual

1. Producte acabatview

This manual provides detailed instructions for the installation, operation, and maintenance of your MACHINIST H61C LGA 1155 Motherboard Kit. This kit includes the H61C motherboard, an Intel Core i3 3240 CPU, and 8GB (2x4GB) DDR3 1600MHz RAM.

1.1 Contingut del paquet

• 1 x MACHINIST H61C Motherboard
• 1 x Intel Core i3 3240 CPU Processor
• 2 x DDR3 4GB 1600MHz RAM Modules (Total 8GB)
• 1 x Escut d'E/S
• 1 x Cable SATA

Note: Gift accessories like the I/O shield and SATA cable are manually tested before packaging. Please understand if any are missing.

2. Especificacions

The following table details the key specifications of the MACHINIST H61C Motherboard:

3. Configuració i instal·lació

Follow these steps carefully to install your motherboard components.

3.1 Instal·lació de la CPU

1. Press down on the lever of the CPU socket and lift it.
2. Open the CPU cover.
3. Align the triangle symbols on the CPU and socket, then gently place the CPU into the socket.
4. Remove the CPU plastic cover.
5. Align the groove with the screw hole and lower the lever to secure the CPU.

Consideracions d'instal·lació:

• Do not touch CPU contacts with your hands.
• Do not touch CPU pins on the motherboard.

3.2 Instal·lació de memòria (RAM)

• Locate the two DDR3 memory slots on the motherboard.
• Obriu els clips dels dos extrems de la ranura de memòria.
• Alineeu l'osca del mòdul RAM amb la clau de la ranura de memòria.
• Insert the RAM module firmly into the slot until the clips snap into place.
• Ensure both RAM modules are securely seated for dual-channel operation.

Recommended memory brands for compatibility: Samsung, Kingston, Sandee, Micron, Hynix.

3.3 Instal·lació SSD M.2

• Localitzeu la ranura M.2 a la placa base.
• Inseriu l'SSD M.2 a la ranura en angle.
• Premeu suaument l'SSD cap avall i fixeu-lo amb el cargol proporcionat.
• The M.2 slot supports NVME/NGFF manual switching. The default protocol is NGFF. If using an NVME SSD, ensure the M.2 mode switching hub is set to NVME Protocol.

3.4 Connexions de la font d'alimentació

• Connect the 24-pin main power connector from your power supply to the corresponding slot on the motherboard.
• Connect the 4-pin CPU power connector (or 8-pin DC if applicable) to the CPU power socket near the CPU.
• Ensure your power supply is at least 500W for stable operation.

3.5 Front Panel Headers and I/O Ports

• Connect the front panel cables (Power LED, HDD LED, Power Switch, Reset Switch) to the corresponding pins on the motherboard's front panel header, referring to Figure 5 for the correct orientation.
• Install the I/O shield into your PC case before installing the motherboard.
• Connect peripherals to the back I/O ports: USB devices, monitor (VGA or HDMI), Ethernet cable (RJ45), and audio devices.

3.6 SATA Devices and PCIe Cards

• Connect SATA data cables from your storage devices (HDDs/SSDs) to the SATA 2.0 ports on the motherboard.
• If installing a graphics card, insert it into the PCIe X16 slot. For other expansion cards, use the PCIe X1 slot.

4. Instruccions de funcionament

• After all components are installed and connected, ensure all power cables are securely plugged in.
• Premeu el botó d'engegada de la carcassa del vostre PC.
• The system should boot up. You may need to install an operating system if it's a new build.
• Connect your monitor to either the VGA or HDMI port on the motherboard's back I/O panel.
• Connect an Ethernet cable to the RJ45 port for network access.
• Use the audio ports for speakers, headphones, or a microphone.

5. Manteniment

• Neteja: Regularly clean dust from inside your PC case, especially around fans and heatsinks, to prevent overheating. Use compressed air for best results.
• Actualitzacions de la BIOS/UEFI: Comproveu el del fabricant website for BIOS/UEFI updates. Only update if necessary and follow instructions carefully.
• Actualitzacions de controladors: Keep your system drivers (chipset, graphics, audio, LAN) updated for optimal performance and stability.
• Comprovació de components: Periodically check all cable connections (power, data, front panel) to ensure they are secure.

6. Solució De Problemes

• El sistema no s'inicia:
  • Ensure all power cables (24-pin main, 4/8-pin CPU) are firmly connected.
  • Verify RAM modules are correctly seated in their slots. Try reseating them or testing one module at a time.
  • Check CPU installation, ensuring the lever is fully closed and no pins are bent.
  • Confirm your power supply unit (PSU) is sufficient (at least 500W recommended).
  • Disconnect all non-essential peripherals and try booting.
• Sense sortida de pantalla:
  • Ensure your monitor is connected to the correct video output (VGA or HDMI) on the motherboard or dedicated graphics card.
  • Check monitor power and input selection.
  • If using a dedicated graphics card, ensure it is properly seated in the PCIe slot and has adequate power.
• Problemes de reconeixement de memòria:
  • Ensure you are using DDR3 desktop memory.
  • Try using memory modules from reputable international brands (Samsung, Kingston, Sandee, Micron, Hynix) for best compatibility.
  • Test each RAM module individually in different slots.
• SSD M.2 no detectat:
  • Verify the M.2 SSD is correctly installed and secured.
  • Check the M.2 mode switching hub (Figure 4) to ensure it's set to the correct protocol (NVME or NGFF/SATA) for your SSD type.
  • Ensure the M.2 slot is enabled in the BIOS/UEFI settings if applicable.

7. Consells d'usuari

• Font d'alimentació: Always use a powerful and reliable power supply unit (PSU) of at least 500W to ensure system stability, especially when adding a dedicated graphics card or multiple storage devices.
• Compatibilitat de memòria: For optimal performance and stability, stick to well-known brands for your DDR3 RAM. Incompatible memory can lead to boot failures or system instability.
• Descàrrega estàtica: Before handling any internal components, always discharge static electricity by touching a grounded metal object (like your PC case) to prevent damage.
• Configuració de la BIOS: After initial setup, enter the BIOS/UEFI to configure boot order, enable XMP for RAM (if supported and desired), and check other system settings.

8. Garantia i Suport

For warranty information and technical support, please refer to the official MACHINIST brand weblloc web o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.

The color of the motherboard's bottom plate may vary between production batches; this does not affect product functionality or performance. Products are continuously optimized and upgraded.

Note: The battery shown in some motherboard photos is not included in the shipment due to logistics restrictions.